DOWNLOAD Sony KV-XG29M90 Service Manual ↓ Size: 7.67 MB | Pages: 74 in PDF or view online for FREE

–

 13 

–

Using Your New TV

13

Press   until the desired
period of time appears.

The Wake Up timer starts
immediately after you have
set it.

Select the program number or video input you want to display when you
wake up.

Press ?/1 or set the Sleep timer if you want the TV to turn off automatically.

The   indicator on the TV lights up orange.

Press   until “WAKE UP TIMER: OFF” appears or turn off the TV’s
main power.

Note
• If no buttons or controls are pressed for more than two hours after the TV

is turned on using the Wake Up timer, the TV automatically goes into the
standby mode. To continue watching the TV, press any button or control
on the TV or the remote.

Press   until the desired
period of time appears.

The Sleep timer starts
immediately after you have
set it.

Press   until “SLEEP TIMER: OFF” appears or turn the TV off.

Using Your New TV

12

* The picture, sound, and either the program number or video input are

displayed. The on-screen display for the picture and sound information
disappears after about three seconds.

Press SELECT until
“LANGUAGE / :
ENGLISH”appears on the
screen.

Press + or – to select
“

“.

Tip
• You can also use SELECT and 2 +/– on the TV to select the on-screen

display language.

Turn off temporarily

Turn off completely

Mute the sound

Watch the video input
(VCR, camcorder, etc.)

Jump back to the previous program
number

Display the on-screen information*

Adjust the volume of all
program numbers automatically

Adjust the picture position when it
is not aligned to the TV screen

b

b

?/1. The 1 indicator on the TV lights up red.

! on the TV.

%.

t to select “VIDEO 1” or “VIDEO 2”.
To return to the TV program, press a.

JUMP.

.

SELECT repeatedly until “INTELLIGENT VOL”
appears, then press + or – to select “ON”.
To cancel, select “OFF”.

SELECT repeatedly until “PIC ROTATION” appears,
then press + or – to adjust the alignment of the picture
position.

The

 or 

 icon on the screen flashes while

adjusting.

–

 14 

–

Advanced Operations

14

You can customize the picture and
sound by selecting the picture and
sound modes or by adjusting its
settings.

You can change the sound effect by
selecting the surround mode.

Press PIC MODE
repeatedly until you get
the desired picture mode.

“DYNAMIC”

receive high contrast pictures.

“STANDARD”

receive normal contrast pictures.

“SOFT”

receive mild pictures.

Press SOUND MODE
repeatedly until you get
the desired sound mode.

“DYNAMIC”

listen to dynamic and clear sound that emphasizes the low and
high sound.

“DRAMA”

listen to sound that emphasizes vocals and background music.

“SOFT”

receive soft sound.

TV

0

SOUND 

MODE

 

FAVORITE

PROGR

PIC MODE

≥

≥

≥

SOUND

MODE

Advanced Operations

15

Press SELECT until the
desired setting appears.

Each time you press
SELECT, the setting
item will change as follows:

Press + or – to adjust the
item.

To adjust other items, repeat steps 1 to 2.

* “HUE” can be adjusted for the NTSC system only.

Notes
• When you select a picture or sound mode, the adjusted settings will be

reset according to the selected mode.

• You can also use SELECT and 

2

 +/– on the TV to adjust the picture and

sound settings.

Press SELECT repeatedly
until “SURROUND”
appears.

Press + or – to select the
desired surround sound.

“MOVIE”

listen to sound that spreads out over a large area, giving the feeling
of being at a movie theatre.

“MUSIC”

listen to the sound that gives the feeling of being at a live concert.

“OFF”

turn off the surround sound.

b

b

SELECT

SELECT

–

 15 

–

Advanced Operations

16

Press PROGR +/– or
number buttons to select
the program number you
want to program (e.g.
program number 8).

Press SELECT until
“FAVORITE CH SETUP”
appears.

Press + or – to select the
favorite channel you want to
program (e.g. 3).

Press SELECT.

The selected favorite channel (e.g.,3) turns
red for about one second.

To program other favorite channels, repeat steps 1 to 4.

You can display six of your favorite
channels for quick and easy selection.
You can program the favorite channel
as well.

Press FAVORITE.

Press the number button
from 1 to 6 to select the
desired favorite channel.

When you use the “FAVORITE CH”
feature for the first time, six preset channels will appear.

1

2

3

4

6

7

8

9

0

5

JUMP

SOUND 

MODE

 

FAVORITE

PROGR

SELECT

PROGR

SELECT

F A V O R I T E   C H

1

P R 0 1   2 P R 0 2   3 P R 0 3

4

P R 0 4   5 P R 0 5   6 P R 0 6

Advanced Operations

17

You can lock some program numbers to
prevent children from watching certain
channels, by using the buttons on the
remote control.

Select the program number you want to lock.

Press SELECT until “CHILD
LOCK” appears on the
screen.

Press + or – to select
“ON”.

The   symbol appears on
the screen.

To cancel, press + or – to
select “OFF”. The 
symbol disappears from
the screen.

Note
• If you preset a locked program number, that particular program number

will be unlocked automatically (see page 8).

TV

1

2

3

4

6

7

8

9

0

5

JUMP

SOUND 

MODE

 

FAVORITE

PROGR

SELECT

–

 16 

–

Advanced Operations

18

NICAM stereo

NICAM bilingual

NICAM monaural

You can enjoy stereo sound or bilingual
programs of NICAM and A2 stereo
systems.

Press A/B repeatedly until you
receive the sound you want.

The on-screen display changes to
show the selected sound.

The 

 indicator on the TV lights

up red when receiving any stereo or
bilingual program.

NICAM

PROGR

TV

1

2

3

4

6

7

8

9

0

5

JUMP

SOUND 

MODE

 

FAVORITE

PROGR

Advanced Operations

19

Notes
• If the signal is very weak, the sound becomes monaural automatically.
• If the stereo sound is noisy when receiving a NICAM program, select

“MONO”. The sound becomes monaural, but the noise is reduced.

• Before receiving a NICAM stereo program in China, please check the

NICAM broadcast condition at your area. When receiving a NICAM
stereo program, the receiving conditions might vary depending on area. In
addition, different strength of the NICAM broadcast signal might affect
the receiving quality.

If the sound is distorted when receiving a monaural program
through the 8 (antenna) terminal

Press A/B repeatedly until “MONO” appears on the screen.

To cancel the monaural sound setting, press A/B again until
“AUTO” appears on the screen.

Notes
• The “MONO” or “AUTO” setting is memorized for each program

number.

• You cannot receive stereo broadcast signal when the TV is in the “MONO”

setting. Normally set the TV to “AUTO”.

A2 stereo

A2 bilingual

NICAM

A2

Hong Kong, Singapore, New Zealand, Malaysia,
Thailand, etc.

Australia, Malaysia, Thailand, etc.