DOWNLOAD Sony KV-XG29M30 (serv.man2) Service Manual ↓ Size: 10.47 MB | Pages: 127 in PDF or view online for FREE

–

 17 

–

Advanced Operations

19

Notes
• If the signal is very weak, the sound becomes monaural automatically.
• If the stereo sound is noisy when receiving a NICAM program, select

“MONO”. The sound becomes monaural, but the noise is reduced.

If the sound is distorted or noisy when receiving a monaural
program through the ˘ (antenna) terminal

Press A/B repeatedly until “MONO” appears on the screen.

To cancel the monaural sound setting, press A/B again until
“AUTO” appears on the screen.

Notes
• The “MONO” or “AUTO” setting is memorized for each program

position.

• You cannot receive stereo broadcast signal when the TV is in the “MONO”

setting. Normally set the TV to “AUTO”.

A2 (German) stereo

A2 (German) bilingual

NICAM

A2 (German)

Hong Kong, Singapore, New Zealand, Malaysia,
Thailand, etc.

Australia, Malaysia, Thailand, etc.

Advanced Operations

20

TV stations broadcast an information
service called Teletext via some TV
channels. Teletext allows you to receive
various information, such as shares
market or news.

Select a TV channel that
carries the Teletext
broadcast you want to
watch.

Press 

 to display the

text.

A Teletext page (normally
the index page) is
displayed. If there is no
Teletext broadcast, “100” is
displayed at the top left
corner of the screen.

Press ;.

b

;

… 

V

TV

1

2

3

4

6

7

8

9

÷

0

5

JUMP

SOUND 

MODE

 

FAVORITE

PROGR

Á

P166 SECTEXT   166   FR1  MAR   03:59:09

Fom Singapore

To PARIS

To OSAKA

To ROMA

To SYDNEY

Day   Dep/Arr       Flight    Alrcraft

1.6   220/0588     SQ28       747

   2   2130/1225   PA115      L15 
   3   2115/1330   SQ26       747

2.7   2130/0745   SQ24       747
   4   2300/0915   AZ487     747

2.5   1000/1715   SQ6         747
4.6   0930/2015   CX522     L10 

   1   2210/0610   SQ21A    747 
   2   2100/0835   SQ21A    747

–

 18 

–

Advanced Operations

21

display a Teletext page on the TV
picture

check the contents of a Teletext service

select a Teletext page

hold a Teletext page
(stop the page from scrolling)

reveal concealed information
(e.g., an answer to a quiz)

enlarge the Teletext display

wait for a Teletext page while watching
a TV program

* You can also select a Teletext page of any page number that appears in the

colored column at the bottom of the screen using the corresponding color-
coded button on the remote.

This feature allows you to quickly access a Teletext page that uses
FASTEXT. When a FASTEXT program is broadcasted, the colored
menus appear at the bottom of the screen. The colors of the menus
correspond to the red, green, yellow, and blue color-coded buttons
on the remote.

Press the color-coded button on the remote corresponding to the
menu you want. The menu page appears on the screen after several
seconds.

Press 

.

Each time you press 

, the screen changes as

follows: Teletext n Teletext and TV n TV.

Press 

.

An overview of the Teletext contents and page
numbers appear on the screen.

Press the number buttons to enter the three-digit
page number of the desired Teletext page. * If you
make a mistake, reenter the correct page number. To
access the next or previous page, press PROGR +/–.

Press 

 to display the symbol “j” at the top left

corner of the screen. To resume normal Teletext
operation, press 

 or 

.

Press 

.

To conceal the information, press the button again.

Press 

.

Each time you press 

, the Teletext display

changes as follows: Enlarge upper half n Enlarge
lower half n Normal size.

1 Enter the Teletext page number that you want to

refer to, then press 

.

2 When the page number is displayed, press 

 to

show the text.

–

 19 

–

Additional Information

22

For better viewing, please check the following connections.

• Snowy

• Distorted

• Noisy/

picture

picture

distorted
sound

Incorrect antenna direction may cause:

Wrong type of antenna
may cause:

• No picture

• Snowy picture

Loose connection may
cause:

• Snowy picture

• Distorted sound

Too strong signal level
may cause:

• Distorted picture

• Noisy sound

Additional Information

23

P166 SECTEXT   166   FR1  MAR   03:59:09

Fom Singapore

To PARIS

To OSAKA

To ROMA

To SYDNEY

Day   Dep/Arr       Flight    Alrcraft

1.6   220/0588     SQ28       747
   2   2130/1225   PA115      L15 
   3   2115/1330   SQ26       747

2.7   2130/0745   SQ24       747
   4   2300/0915   AZ487     747

2.5   1000/1715   SQ6         747
4.6   0930/2015   CX522     L10 

   1   2210/0610   SQ21A    747 
   2   2100/0835   SQ21A    747

Loose connection may
cause:

• Snowy picture

• Distorted sound

• No picture

For more information, please see
“Troubleshooting” on page 24 or
consult your dealer for guidance.

Loose connection may cause:

• no power

• no picture with no sound

• Double image

•

Missing

picture

Teletext
characters

–

 20 

–

Additional Information

24

If you find any problem while viewing your TV, please check the following guide. If
any problem persists, contact your Sony dealer .

• Connection is loose or

the cable is damaged.

• Channel presetting is

inappropriate or
incomplete.

• The antenna type is

inappropriate.

• The antenna direction

is inappropriate.

• Signal transmission is

low.

• Broadcast signals are

too strong.

• The TV system setting

or channel presetting
is inappropriate or
incomplete.

• The selected sound is

inappropriate.

• The power cord,

antenna or VCR is not
connected.

• The TV is not turned

on.

• Check the antenna cable and connection

on the TV, VCR and on the wall.

• Press SELECT until “MANUAL

PROGRAM” appears on the screen, then
preset the channel again.

• Check the antenna type (VHF/UHF).

Contact a Sony dealer for advice.

• Adjust the antenna direction. Contact a

Sony dealer for advice.

• Try using a booster.

• Turn off or disconnect the booster if it is

in use.

• If the sound of all the channels are noisy,

check the TV system (TV SYS) setting,
then press AUTO PROGR to preset the
channels again.

• If the sound of some channels are noisy,

select the channel, then select the
appropriate TV system (TV SYS).

• If the sound of some channels are noisy,

select the channel, then press A/B to select
the main sound (KV-XG29M30/XG29M60/
XG29M90 only).

• Check the power cord, antenna and the

VCR connections.

• Press u (power).

• Press U (main power) on the TV to turn

off the TV for about five seconds, then
turn it on again.

4

9

–

–

–

–

8

9

18

4

12

11

Additional Information

25

• The volume level is too

low.

• The sound is muted.

• Broadcast signal has a

transmission problem.

• There is local

interference from cars,
neon signs, hair
dryers, power
generators, etc.

• Broadcast signals are

reflected by nearby
mountains or buildings.

• The antenna direction

is inappropriate.

• Use of a booster is

inappropriate.

• The color level setting

is too low.

• The color system

setting is
inappropriate.

• The antenna direction

is inappropriate.

• The magnetic

disturbance from
external speakers or
other equipment, or
the direction of the
earth’s magnetic field
may affect the TV.

• The stereo reception

setting is
inappropriate.

11

12

18

–

–

–

10

–

–

15

10

–

–

18

• Press ¸ + to increase the volume level.

• Press ¤ to cancel the muting.

• Press A/B until a better sound is heard

(KV-XG29M30/XG29M60/XG29M90
only).

• Do not use a hair dryer or other

equipment near the TV.

• Adjust the antenna direction for

minimum interference. Contact a Sony
dealer for advice.

• Use a highly directional antenna.

• Use the fine tuning (FINE) function.

• Adjust the antenna direction. Contact a

Sony dealer for advice.

• Turn off or disconnect the booster if it is

in use.

• Press SELECT until “COLOR” appears

on the screen, then press + or – to adjust
the color level.

• Press SELECT until “COL SYS ” appears

on the screen, then check the color
system setting (usually set this to
“AUTO”).

• Adjust the antenna direction. Contact a

Sony dealer for advice.

• Keep external speakers or other electrical

equipment away from the TV. Do not
move the TV while the TV is turned on.
Press U  (main power) on the TV to turn
off the TV for about five minutes, then
turn it on again.

• Press A/B until “AUTO” appears

on the screen.