DOWNLOAD Sony KV-XG25M80 Service Manual ↓ Size: 2.97 MB | Pages: 73 in PDF or view online for FREE

–

 9 
–

Using Your New TV

4

VIDEO

VIDEO IN

VIDEO OUT

AUDIO

R

L

R

L

VIDEO IN

VIDEO OUT

VIDEO

AUDIO

If you wish to connect a VCR, see the Connecting a VCR diagram below.

To watch the video input, press t (see page 14).

      To t 1 (video input)

To 8 (antenna)

     To t 1 or 2 (video input)

To 8 (antenna)

Using Your New TV

5

Note
• Do not use old batteries nor use different types of batteries together.

Notes
• If you connect a monaural VCR, connect the yellow plug to 

 (the

yellow jack) and the black plug to  -L (MONO) (the white jack).

• If you connect a VCR  to the 8 (antenna) terminal, preset the signal

output from the VCR to the program number 0 on the TV.

• When no signal is input from the connected video equipment, the TV

screen becomes blue.

KV-XG29M81/XG29M80/XG25M80 only
• Do not connect video equipment to the t 2 (video input) jacks at the

front and the rear of your TV at the same time; otherwise the picture will
not be displayed properly on the screen.

CAUTION
• Do not connect the power cord until you have completed making all other

connections; otherwise a minimum leakage current might flow through
the antenna and other terminals to ground.

• To avoid battery leakage and damage to the remote, remove the batteries

from the remote if you are not going to use it for several days. If any
liquid that leaks from the batteries touches you, immediately wash it
away with water.

Tips
• If you want to stop automatic channel presetting, press SELECT twice.
• If your TV has preset an unwanted channel or cannot preset a particular

channel, then preset your TV manually (see page 11).

Note
• During automatic channel presetting, your TV screen will indicate

“B/G” , “I”, “D/K” or “M” for the TV system (TV SYS).

AUTO

PROGR

1

VHF  LOW  B/G

2

L(MONO)

R

PROGR

SELECT AUTO

PROGR

!

–

 10 

–

Using Your New TV

6

You can enjoy high quality sound by connecting the TWEETER.

Place the TWEETER on top of your TV.

Bend the wire to hook it at the side of your TV.

Connect the wires to the TWEETER terminals at the rear of your TV. The
plain wire should be connected to the 3 red terminal and the striped wire
to the # black terminal.

Notes
• Connect only the supplied TWEETER; otherwise your TV may

malfunction.

• Unplug your TV from the wall outlet when connecting the TWEETER.
• To prevent a malfunction caused by a short circuit of the terminals, make

sure that none of the TWEETER wire strands stick out, making contact
with the neighbouring TWEETER terminal.

TWEETER

Using Your New TV

8

Note
• If you connect a monaural VCR, connect the yellow plug to 

 (the yellow

jack) and the black plug to  -L (MONO) (the white jack).

To T
(monitor output)

L(MONO)

1

–

 11 

–

Using Your New TV

9

To prevent the TV from falling, secure the TV using one of the following methods:

A

With the supplied screws, attach the band to the TV stand and to the rear of
the TV using the provided hole.

B

Put the cord or chain through the clamps to secure the TV against a wall or
pillar.

Note
• Use only the supplied screws. Use of other screws may damage the TV.

A

B

Using Your New TV

10

You can preset up to 100 TV channels in
numerical sequence from program
number 1 using the remote and the
buttons on your TV as well.

Press ! to turn on the TV.

Press AUTO PROGR.

Note
• During automatic channel presetting, your TV screen will indicate “B/G”,

“I”, “D/K” or “M” for the TV system (TV SYS).

(1) Press SELECT until “AUTO PROGRAM” appears.

(2) Press + or –.

The on-screen display will start flashing.

(3) Press PROGR +/– or the number buttons until the desired program number

appears.

(4) Press + or –.

?

/1

2

TV

1

2

3

4

6

7

8

9

÷

0

5

JUMP

SOUND 

MODE

 

FAVORITE

PROGR

Á

2

L(MONO)

R

PROGR

SELECT

AUTO
PROGR

AUTO

PROGR

!

!

–

 12 

–

Using Your New TV

11

Press SELECT until
“MANUAL PROGRAM”
appears.

Press + or –.

Press PROGR +/– or the
number buttons until the
desired program number
appears.

Press + or – until the
desired channel picture
appears.

Press SELECT.

Note
• If you preset a locked program number, that particular program number

will be unlocked automatically (page 20).

If the picture or sound is abnormal when receiving programs through the 8 (antenna)
terminal

(1) Press SELECT until “TV SYS” appears.

(2) Press + or – to select the appropriate

TV system until the picture or sound
quality is optimal.

SELECT

PROGR

SELECT

Using Your New TV

12

If the color is abnormal when receiving programs through the 8 (antenna) terminal
or the t (video input) jack.

(1) Press SELECT until “COLOR SYS” appears.

(2) Press + or – to select the appropriate

color system until the color is
optimal.

Tip
• Normally set “COLOR SYS” to “AUTO”.

Press PROGR +/– or the number buttons until the unused or unwanted
program number appears.

Press SELECT until “MANUAL PROGRAM” appears.

Press + or –.

Press PIC MODE.

Press SELECT.

Preset the channel automatically or manually.

Tip
• You can also use SELECT and 

2

 +/– on the TV to preset channels and

skip program numbers.

The fine tuning (FINE) function may help to reduce the following problems:
incomplete Teletext display (KV-XG29M81 only), double images and lines moving
across the TV screen.
You can use the fine tuning function as below:
(1) Select the program number you want to adjust.
(2) Press SELECT until “MANUAL PROGRAM” appears on the screen.
(3) Press + or – on the remote control once.
(4) Press 

 to display “FINE” on the screen.

(5) Press + or – continuously until the above problems are minimized.

The + or – icon on the screen flashes while tuning.

(6) Press SELECT to return to normal screen.