Sony KV-XF25M50 (serv.man3) Service Manual ▷ View online
– 9 –
KV
-XF25M50/XF25M61
-XF25M50/XF25M61
KV
-XF25M80/XF25M93
-XF25M80/XF25M93
RM-954
5
Using Your New TV
Using Y
our New TV
Front of TV
AUTO
PROGR
1
ONE-PUSH AUTOMATIC PROGRAMMING
ONE-PUSH AUTOMATIC PROGRAMMING
AUTO PROGRAM
TV SYS:B/G
VHF LOW
VHF LOW
PR:01
PROGR
Notes
• If you connect a monaural VCR, connect the yellow plug to
• If you connect a monaural VCR, connect the yellow plug to
(the
yellow jack) and the black plug to -L (MONO) (the white jack).
• If you connect a VCR to the ˘ (antenna) terminal, preset the signal
output from the VCR to the program number 0 on the TV.
• If both
(S video input) and … 1 (video input) at the rear of your TV
are input at the same time, the
␣ (S video input) is automatically
selected. To view … 1 (video input), disconnect the S video cable.
• When no signal is input to the connected video equipment, the TV screen
becomes blue.
Step 2
Insert the batteries
into the remote
into the remote
Note
• Do not use old batteries nor use different types of batteries together.
• Do not use old batteries nor use different types of batteries together.
Step 3
Preset the channels automatically
Tip
• If you want to stop the automatic channel presetting, press MENU twice.
Note (KV-XF25M61/XF25M93 only)
• The TV system (TV SYS) is always “AUTO” in the AUTO PROGRAM
• If you want to stop the automatic channel presetting, press MENU twice.
Note (KV-XF25M61/XF25M93 only)
• The TV system (TV SYS) is always “AUTO” in the AUTO PROGRAM
menu.
Now You Are Ready. . .
To preset the channels manually, see
page 24 and 25.
page 24 and 25.
1
2
6
Using Your New TV
Connecting the 3D WOOFER
WOOFER
(8 )
3D WOOFER
Black wire
Red wire
(KV-XF25M93 only)
1
2
1
Attach the 3D WOOFER into the footholds on the top of your TV.
2
Connect the wires to the 3D WOOFER (8
Ω
) terminals at the rear of your TV.
The red wire should be connected to the ‘ red terminal and the black wire
to the ’ black terminal.
to the ’ black terminal.
Notes
• Connect only the supplied 3D WOOFER; otherwise your TV may
• Connect only the supplied 3D WOOFER; otherwise your TV may
malfunction.
• Unplug your TV from the wall outlet when connecting the 3D WOOFER.
• To prevent a malfunction caused by a short circuit of the terminals, make
• To prevent a malfunction caused by a short circuit of the terminals, make
sure that none of the 3D WOOFER wire strands stick out, making contact
with the neighbouring speaker terminal.
with the neighbouring speaker terminal.
You can enjoy high quality sound by connecting the 3D WOOFER.
Rear of TV
– 10 –
KV
-XF25M50/XF25M61
-XF25M50/XF25M61
KV
-XF25M80/XF25M93
-XF25M80/XF25M93
RM-954
8
Using Your New TV
Securing the TV
To prevent the TV from falling, secure the TV using one of the following methods:
A
With the supplied screws, attach the band to the TV stand and to the rear of
the TV using the provided hole.
the TV using the provided hole.
or
B
Put the cord or chain through the clamps to secure the TV against a wall or
pillar.
pillar.
Note
• Use only the supplied screws. Use of other screws may damage the TV.
• Use only the supplied screws. Use of other screws may damage the TV.
20
mm
mm
A
B
3.8mm
or
7
Using Your New TV
Using Y
our New TV
3
(MONO)
Connecting optional components
You can connect optional audio/video components, such as a VCR, multi disc player,
camcorder, video game or stereo system.
camcorder, video game or stereo system.
To watch the picture of the connected equipment, see page 10.
Connecting a camcorder/video game equipment
using the … (video input) jacks
using the … (video input) jacks
Notes
• You can also connect video equipment to the … 1 or 2 (video input) jacks
• You can also connect video equipment to the … 1 or 2 (video input) jacks
at the rear of your TV.
• If both
(S video input) and … 3 (video input) at the front of your TV
are input at the same time, the
(S video input) is automatically
selected. To view … 3 (video input), disconnect the S video cable.
Connecting audio/video equipment using the Ú
(monitor output) jacks
(monitor output) jacks
Note
• When connecting a monaural VCR, connect the yellow plug to
• When connecting a monaural VCR, connect the yellow plug to
(the
yellow jack) and the black plug to -L (MONO) (the white jack).
To S video output
Front of TV
Camcorder
Video game
equipment
equipment
To video and
audio outputs
audio outputs
: Signal flow
To
(S video
input)
(S video
input)
To… 3
(video input)
(video input)
or
Audio/Video cable (not supplied)
S video cable (not supplied)
WOOFER
(8 )
(yellow)
-L (MONO)
(white)
-R (red)
Rear of TV
To
antenna
output
antenna
output
To video and
audio inputs
audio inputs
or
Audio system
To
audio
inputs
audio
inputs
VCR
: Signal flow
To Ú
(monitor
output)
(monitor
output)
Antenna cable (not supplied)
Audio/Video cable
(not supplied)
(not supplied)
or
– 11 –
KV
-XF25M50/XF25M61
-XF25M50/XF25M61
KV
-XF25M80/XF25M93
-XF25M80/XF25M93
RM-954
9
Using Your New TV
Using Y
our New TV
1
4
7
-/--
2
5
8
0
3
6
9
FAVORITE
SOUND
MODE
PIC MODE
ENTER
MENU
A/B
SURROUND
Watching the TV
This section explains functions used
while watching TV. Most operations can
be done using the remote.
while watching TV. Most operations can
be done using the remote.
1
Press U to turn on the TV.
When the TV is in the
standby mode (the u
indicator on the TV is lit
red), press u on the remote
or PROGR +/– on the TV.
standby mode (the u
indicator on the TV is lit
red), press u on the remote
or PROGR +/– on the TV.
2
Press PROGR +/– or
number buttons to select
the TV program.
number buttons to select
the TV program.
For double digit numbers,
press ÷, then the number
(e.g., for 25, press ÷, then
2 and 5).
press ÷, then the number
(e.g., for 25, press ÷, then
2 and 5).
3
Press . +/– to adjust the
volume.
volume.
¤
u
…
…
;
Number buttons
JUMP
.
+/–
PROGR +/–
continued
1
2
3
4
5
6
7
8
0
-/--
9
MENU
+/–/ENTER
+/–/ENTER
or
10
Using Your New TV
ENTER
ENTER
:PRO1
/LANGUAGE:
:
To
Turn off temporarily
Turn off completely
Mute the sound
Watch the video input
(VCR, camcorder, etc.)
(VCR, camcorder, etc.)
Jump back to the previous channel
Display the on-screen information*
Do this
Press u. The u indicator on the TV lights up red.
Press U on the TV.
Press ¤.
Press …
to select “VIDEO 1”, “VIDEO 2” and
“VIDEO 3”.
To return to the TV program, press ;.
To return to the TV program, press ;.
Press JUMP.
Press
.
* The picture, sound, and either the program number or video mode are
displayed. The on-screen display for the picture and sound information
disappears after about 3 seconds.
disappears after about 3 seconds.
Changing the menu language (Except KV-XF25M80(ME))
You can change the menu language as well as the on-screen language.
For details on how to use the menu, see “How to use the menu” on page 18.
Additional tasks
1
Press MENU.
2
Press + or – to select the
SET UP icon (
SET UP icon (
), then
press ENTER.
3
Make sure LANGUAGE/
is selected, then press
ENTER.
is selected, then press
ENTER.
4
Press + or – to select
,
then press ENTER.
The menu language changes to Chinese.
To return to the normal screen
Press MENU.
MENU
ENTER
A/V CONTROL
SOUND MODE:DYNAMIC
SURROUND:OFF
SURROUND:OFF
:DYNAMIC
PICTURE MODE
SET UP
CHILD LOCK:PR00 OFF
PIC ROTATION
FAVORITE CH
PIC ROTATION
FAVORITE CH
INTELLIGENT VOL:OFF
LANGUAGE/ :
ENGLISH
SET UP
CHILD LOCK
FAVORITE C
PIC ROTATI
INTELLIGENT
LANGUAGE:
ENGLISH
Watching the TV (continued)
– 12 –
KV
-XF25M50/XF25M61
-XF25M50/XF25M61
KV
-XF25M80/XF25M93
-XF25M80/XF25M93
RM-954
11
Using Your New TV
Using Y
our New TV
Setting the Wake Up timer
1
Press
until the
desired period of time
appears.
appears.
2
Select the TV program or video mode you want to display when you wake
up.
up.
3
Press u or set the Sleep timer if you want the TV to turn off automatically.
The
indicator on the TV lights up orange.
To cancel the Wake Up timer
Press
until “WAKE UP TIMER: OFF” appears or turn off the
TV’s main power.
Notes
•
•
The Wake Up timer starts immediately after the on-screen display
disappears.
disappears.
•
If no buttons or controls are pressed for more than two hours after the
TV is turned on using the Wake Up timer, the TV automatically goes into
the standby mode. To continue watching the TV, press any button or
control on the TV or the remote.
TV is turned on using the Wake Up timer, the TV automatically goes into
the standby mode. To continue watching the TV, press any button or
control on the TV or the remote.
Setting the Sleep timer
Press
until the
desired period of time
appears.
appears.
To cancel the Sleep timer
Press
until “SLEEP TIMER: OFF” appears or turn the TV off.
WAKE UP TIMER:10M
WAKE UP TIMER:OFF
WAKE UP TIMER:12H00M
After 10 minutes
No Wake Up Timer
After 12 hours
SLEEP TIMER:30M
SLEEP TIMER:60M
SLEEP TIMER:OFF
SLEEP TIMER:90M
After 30 minutes
No Sleep Timer
After 60 minutes
After 90 minutes
10
Using Your New TV
ENTER
To
Turn off temporarily
Turn off completely
Mute the sound
Watch the video input
(VCR, camcorder, etc.)
(VCR, camcorder, etc.)
Jump back to the previous channel
Display the on-screen information*
Do this
Press u. The u indicator on the TV lights up red.
Press U on the TV.
Press ¤.
Press …
to select “VIDEO 1”, “VIDEO 2” and
“VIDEO 3”. To return to the TV program, press ;.
Press JUMP.
Press
.
* The picture, sound, and either the program number or video mode are
displayed. The on-screen display for the picture and sound information
disappears after about 3 seconds.
disappears after about 3 seconds.
Changing the menu language (KV-XF25M80(ME))
You can change the menu language as well as the on-screen language.
For details on how to use the menu, see “How to use the menu” on page 20.
For details on how to use the menu, see “How to use the menu” on page 20.
Additional tasks
1
Press MENU.
2
Press + or – to select the
SET UP icon (
SET UP icon (
), then
press ENTER.
3
Make sure “LANGUAGE/
”
is selected, then press ENTER.
4
Press + or – to select
“
“
”, then press ENTER.
The menu language
changes to Arabic.
changes to Arabic.
To return to the normal screen
Press MENU.
Note
• You can change the menu language as well as the on-screen language
• You can change the menu language as well as the on-screen language
between English and Chinese.
MENU
ENTER
A/V CONTROL
SOUND MODE:DYNAMIC
SURROUND:OFF
SURROUND:OFF
:DYNAMIC
PICTURE MODE
Watching the TV (continued)
ENTER
SET UP
CHILD LOCK
FAVORITE C
PIC ROTATI
INTELLIGENT
LANGUAGE/ :
ENGLISH
:PR01
:
/LANGUAGE:
SET UP
CHILD LOCK:PR00 OFF
PIC ROTATION
FAVORITE CH
PIC ROTATION
FAVORITE CH
INTELLIGENT VOL:OFF
LANGUAGE/ :
ENGLISH
Click on the first or last page to see other KV-XF25M50 (serv.man3) service manuals if exist.