Sony KV-XF21M80 Service Manual ▷ View online
– 9 –
KV
-XF21M80
-XF21M80
RM-952
5
Using Your New TV
Using Y
our New TV
VIDEO
VIDEO IN
VIDEO OUT
AUDIO
L(MONO)
1
To video and
audio outputs
audio outputs
VCR
(yellow)
-L (MONO) (white)
-R (red)
-R (red)
Antenna cable (not supplied)
To … 1
(video input)
(video input)
Audio/Video cable
(not supplied)
(not supplied)
: Signal flow
To antenna
output
output
To ˘
(antenna)
(antenna)
Notes
• If you connect a monaural VCR, connect the yellow plug to
• If you connect a monaural VCR, connect the yellow plug to
(the
yellow jack) and the black plug to -L (MONO) (the white jack).
• If you connect a VCR to the ˘ (antenna) terminal, preset the signal
output from the VCR to the program number 0 on the TV.
• When no signal is input to the connected video equipment, the TV screen
becomes blue.
CAUTION
Do not connect the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through the antenna
and other terminals to ground.
connections; otherwise a minimum leakage current might flow through the antenna
and other terminals to ground.
Rear of TV
continued
Connecting a VCR
To watch the video, press …
(see page 13).
6
Using Your New TV
1
2
Front of TV
1
1
VHF LOW B/G
ONE-PUSH AUTOMATIC PROGRAMMING
ONE-PUSH AUTOMATIC PROGRAMING
Step 2
Insert the batteries
into the remote
into the remote
Note
• Do not use old batteries nor use different types of batteries together.
• Do not use old batteries nor use different types of batteries together.
Step 3
Preset the channels automatically
Tip
• If you want to stop the automatic channel presetting, press AUTO PROGR again.
Note
• If your TV has preset an unwanted channel or cannot preset a particular channel,
• If you want to stop the automatic channel presetting, press AUTO PROGR again.
Note
• If your TV has preset an unwanted channel or cannot preset a particular channel,
then preset your TV manually (see page 9).
Now You Are Ready. . .
To watch your TV, see page 12.
Getting Started (continued)
– 10 –
KV
-XF21M80
-XF21M80
RM-952
8
Using Your New TV
Securing the TV
To prevent the TV from falling, secure the TV using one of the following methods:
A
With the supplied screws, attach the band to the TV stand and to the rear of
the TV using the provided hole.
the TV using the provided hole.
or
B
Put the cord or chain through the clamps to secure the TV against a wall or
pillar.
pillar.
Note
• Use only the supplied screws. Use of other screws may damage the TV.
• Use only the supplied screws. Use of other screws may damage the TV.
20
mm
mm
A
B
3.8mm
or
7
Using Your New TV
Using Y
our New TV
Connecting optional components
You can connect optional audio/video components, such as a VCR, multi disc player,
camcorder, video game or stereo system.
camcorder, video game or stereo system.
To watch the picture of the connected equipment, press …
(see page 13).
Connecting a camcorder/video game equipment
using the … (video input) jacks
using the … (video input) jacks
Note
• You can also connect video equipment to the … 1 (video input) jacks at
• You can also connect video equipment to the … 1 (video input) jacks at
the rear of your TV.
Connecting audio/video equipment using the Ú
(monitor output) jacks
(monitor output) jacks
Note
• When connecting a monaural VCR, connect the yellow plug to
• When connecting a monaural VCR, connect the yellow plug to
(the
yellow jack) and the black plug to -L (MONO) (the white jack).
L(MONO)
1
ONE-PUSH AUTOMATIC PROGRAMING
ONE-PUSH AUTOMATIC PROGRAMING
2
Front of TV
Camcorder
Video game
equipment
equipment
To video and
audio outputs
audio outputs
(yellow)
-L (MONO)
(white)
-R (red)
Rear of TV
To
antenna
output
antenna
output
To video and
audio inputs
audio inputs
or
Audio system
To
audio
inputs
audio
inputs
VCR
:Signal flow
:Signal flow
To… 2
(video input)
(video input)
To Ú
(monitor
output)
(monitor
output)
or
Audio/Video cable (not supplied)
Antenna cable (not supplied)
Audio/Video cable
(not supplied)
(not supplied)
or
– 11 –
KV
-XF21M80
-XF21M80
RM-952
9
Using Your New TV
Using Y
our New TV
Presetting
channels
channels
You can preset up to 100 TV channels in
numerical sequence from program
number 1 using the remote and the
buttons on your TV as well.
numerical sequence from program
number 1 using the remote and the
buttons on your TV as well.
Presetting channels automatically
1
Press U to turn on the TV.
2
Press SELECT until
“TV SYS” appears.
“TV SYS” appears.
3
Press + or – to select either
B/G, I, D/K, or M until
sound quality is optimal.
B/G, I, D/K, or M until
sound quality is optimal.
4
Press AUTO PROGR.
To channels automatically from a specified program number
(1) Press SELECT until “TV SYS” appears.
(2) Press + or – to select either B/G, I, D/K, or M until sound quality is optimal.
(3) Press SELECT until “AUTO PROGRAM” appears.
(4) Press + or –.
(5) Press PROGR +/– or number buttons until the desired program number appears.
(6) Press + or –.
1
2
3
4
6
7
8
9
÷
0
5
JUMP
SOUND
MODE
FAVORITE
PROGR
Á
u
Number buttons
SELECT
.
+/–
PROGR +/–
+ or –
PIC MODE
TV SYS: B/G
SELECT
B/G
I
D/K
M
VHF LOW B/G
ONE-PUSH AUTOMATIC PROGRAMING
10
Using Your New TV
Presetting channels manually
1
Press SELECT until
“TV SYS” appears.
“TV SYS” appears.
2
Press + or – to select either
B/G, I, D/K, or M until
sound quality is optimal.
B/G, I, D/K, or M until
sound quality is optimal.
3
Press SELECT until
“MANUAL PROGRAM”
appears.
“MANUAL PROGRAM”
appears.
4
Press + or –.
5
Press PROGR +/– or
number buttons until the
desired program number
appears.
number buttons until the
desired program number
appears.
6
Press + or – until the
desired channel picture
appears.
desired channel picture
appears.
7
Press SELECT.
MANUAL PROGRAM
SELECT
TV SYS: B/G
SELECT
B/G
I
D/K
M
VHF LOW B/G
SELECT
1
2
3
4
5
6
7
8
0
-/--
9
or
1
SELECT
– 12 –
KV
-XF21M80
-XF21M80
RM-952
12
Using Your New TV
Watching the TV
This section explains functions used
while watching the TV. Most operations
can be done using the remote.
while watching the TV. Most operations
can be done using the remote.
1
Press U to turn on the TV.
When the TV is in the
standby mode (the u
indicator on the TV is lit
red), press u on the
remote.
standby mode (the u
indicator on the TV is lit
red), press u on the
remote.
2
Press PROGR +/– or
number buttons to select
the TV program.
number buttons to select
the TV program.
For double digit numbers,
press ÷, then the number
(e.g., for 25, press ÷, then
2 and 5).
press ÷, then the number
(e.g., for 25, press ÷, then
2 and 5).
3
Press . +/– to adjust the
volume.
volume.
¤
u
…
;
Number buttons
SELECT
.
+/–
PROGR +/–
+ or –
TV
1
2
3
4
6
7
8
9
÷
0
5
JUMP
SOUND
MODE
FAVORITE
PROGR
SELECT
p
PIC MODE
p
Á
JUMP
FAVORITE
1
2
3
4
5
6
7
8
0
-/--
9
or
ONE-PUSH AUTOMATIC PROGRAMING
11
Using Your New TV
Using Y
our New TV
Skipping program numbers
1
Press PROGR +/– or number buttons until the unused or unwanted program
number appears.
number appears.
2
Press SELECT until “MANUAL PROGRAM” appears.
3
Press + or –.
4
Press PIC MODE.
5
Press SELECT.
To preset the skipped program number again
Preset the channel automatically or manually.
Tip
• You can also use SELECT and
• You can also use SELECT and
¸
+/– on the TV to preset channels and
skip program numbers.
Note
• The fine tuning (FINE) function may help to reduce the following
• The fine tuning (FINE) function may help to reduce the following
problems: incomplete Teletext display, double images and lines moving
across the TV screen.
You can use the fine tuning function as below:
1 Select the program position you want to adjust.
2 Press SELECT until “MANUAL PROGRAM” appears on the screen.
3 Press + or – on the remote control once.
4 Press
across the TV screen.
You can use the fine tuning function as below:
1 Select the program position you want to adjust.
2 Press SELECT until “MANUAL PROGRAM” appears on the screen.
3 Press + or – on the remote control once.
4 Press
to display “FINE” on the screen.
5 Press + or – continuously until the above problems are reduced.
6 Press SELECT to return to normal screen.
6 Press SELECT to return to normal screen.
Tips
• If the picture color is abnormal when receiving programs through the
• If the picture color is abnormal when receiving programs through the
˘
(antenna) terminal, change the “TV SYS” or “COL SYS” setting or adjust
the “COLOR” level in the on-screen display until the color becomes normal.
• If the picture color is abnormal when receiving programs through the
… (video input) jack, change the “TV SYS” or “COL SYS” setting or adjust
the “COLOR” level in the on-screen display until the color becomes normal.
the “COLOR” level in the on-screen display until the color becomes normal.
• If the sound is distorted or noisy when receiving programs through the
˘
(antenna) terminal, change the “TV SYS” setting in the on-screen
display until the sound becomes clear.
• Normally set “COL SYS” to “AUTO”.
Click on the first or last page to see other KV-XF21M80 service manuals if exist.