DOWNLOAD Sony KV-XF21M80 Service Manual ↓ Size: 1.26 MB | Pages: 46 in PDF or view online for FREE

– 8 –

2

•  Dangerously high voltages are present inside the TV.

•  Operate the TV only between 110 – 240 V AC.

To prevent fire or shock hazard, do not expose
the TV to rain or moisture.

Do not operate the TV if any liquid or solid object
falls into it. Have it checked immediately by
qualified personnel only.

Do not open the cabinet and the rear cover of the
TV. Refer servicing to qualified personnel.

Do not install the TV in hot, humid or excessively
dusty places.

Do not install the TV in a confined space, such
as a bookcase or built-in cabinet.
Do not block the ventilation openings of the TV.

Do not pull the power cord to disconnect the TV.
Pull it out by the plug.

Disconnect the power cord during lightning
storms or if you are not going to use the TV for
several days.

Install the TV in a stable position. Do not allow
children to climb onto it.

Do not plug in too many appliances to the same
power socket. Do not damage the power cord.

Clean the TV with a dry and soft cloth.
Do not use benzine, thinner, or any other chemicals
to clean the TV. Do not scratch the picture tube.

4

Using Your New TV

If you wish to connect a VCR, see the “Connecting a VCR” diagram below.

Note
• You are advise to use an outdoor antenna for better reception.

WOOFER (8

Ω

)

L(MONO)

L(MONO)

1

1

2

3

– 9 –

5

Using Your New TV

VIDEO

VIDEO IN

VIDEO OUT

AUDIO

L(MONO)

1

To … 1
(video input)

To ˘
(antenna)

Notes
• If you connect a monaural VCR, connect the yellow plug to 

 (the

yellow jack) and the black plug to  -L (MONO) (the white jack).

• If you connect  a VCR  to the ˘ (antenna) terminal, preset the signal

output from the VCR to the program number 0 on the TV.

• When no signal is input to the connected video equipment, the TV screen

becomes blue.

Do not connect the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through the antenna
and other terminals to ground.

To watch the video, press … 

 (see page 13).

6

Using Your New TV

VHF LOW  B/G

ONE-PUSH  AUTOMATIC  PROGRAMMING

ONE-PUSH  AUTOMATIC  PROGRAMING

Note
• Do not use old batteries nor use different types of batteries together.

Tip
• If you want to stop the automatic channel presetting, press AUTO PROGR again.
Note
• If your TV has preset an unwanted channel or cannot preset a particular channel,

then preset your TV manually (see page 9).

– 10 –

8

Using Your New TV

To prevent the TV from falling, secure the TV using one of the following methods:

A

With the supplied screws, attach the band to the TV stand and to the rear of
the TV using the provided hole.

B

Put the cord or chain through the clamps to secure the TV against a wall or
pillar.

Note
• Use only the supplied screws. Use of other screws may damage the TV.

A

B

7

Using Your New TV

You can connect optional audio/video components, such as a VCR, multi disc player,
camcorder, video game or stereo system.

To watch the picture of the connected equipment, press … 

 (see page 13).

Connecting a camcorder/video game equipment
using the … (video input) jacks

Note
• You can also connect video equipment to the … 1 (video input) jacks at

the rear of your TV.

Connecting audio/video equipment using the Ú
(monitor output) jacks

Note
• When connecting a monaural VCR, connect the yellow plug to 

 (the

yellow jack) and the black plug to   -L (MONO) (the white jack).

L(MONO)

1

ONE-PUSH  AUTOMATIC  PROGRAMING

ONE-PUSH  AUTOMATIC  PROGRAMING

2

To… 2
(video input)

To Ú
(monitor
output)

– 11 –

9

Using Your New TV

You can preset up to 100 TV channels in
numerical sequence from program
number 1 using the remote and the
buttons on your TV as well.

Press U to turn on the TV.

Press SELECT until
“TV SYS” appears.

Press + or – to select either
B/G, I, D/K, or M until
sound quality is optimal.

Press AUTO PROGR.

(1) Press SELECT until “TV SYS” appears.

(2) Press + or – to select either B/G, I, D/K, or M until sound quality is optimal.

(3) Press SELECT until “AUTO PROGRAM” appears.

(4) Press + or –.

(5) Press PROGR +/– or number buttons until the desired program number appears.

(6) Press + or –.

1

2

3

4

6

7

8

9

÷

0

5

JUMP

SOUND 

MODE

 

FAVORITE

PROGR

Á

u

.

SELECT

VHF LOW  B/G

ONE-PUSH  AUTOMATIC  PROGRAMING

10

Using Your New TV

Press SELECT until
“TV SYS” appears.

Press + or – to select either
B/G, I, D/K, or M until
sound quality is optimal.

Press SELECT until
“MANUAL PROGRAM”
appears.

Press + or –.

Press PROGR +/– or
number buttons until the
desired program number
appears.

Press + or – until the
desired channel picture
appears.

Press SELECT.

SELECT

SELECT

VHF LOW  B/G

SELECT

SELECT