DOWNLOAD Sony KV-XF21M80 (serv.man3) Service Manual ↓ Size: 881.72 KB | Pages: 46 in PDF or view online for FREE

Model
KV-XF21M80 (serv.man3)
Pages
46
Size
881.72 KB
Type
PDF
Document
Service Manual
Brand
Device
TV
File
kv-xf21m80-sm3.pdf
Date

Sony KV-XF21M80 (serv.man3) Service Manual ▷ View online

– 8 –
KV
-XF21M80/XF21M8J
RM-952
SECTION  1
GENERAL
The operating instructions mentioned here are partial abstracts 
from the Operating Instruction Manual.  The page numbers of 
the Operating Instruction Manual remain as in the manual.
2
WARNING
•  Dangerously high voltages are present inside the TV.
•  Operate the TV only between 110 – 240 V AC.
To prevent fire or shock hazard, do not expose
the TV to rain or moisture.
Do not operate the TV if any liquid or solid object
falls into it. Have it checked immediately by
qualified personnel only.
Do not open the cabinet and the rear cover of the
TV. Refer servicing to qualified personnel.
Do not install the TV in hot, humid or excessively
dusty places.
Do not install the TV in a confined space, such
as a bookcase or built-in cabinet.
Do not block the ventilation openings of the TV.
Do not pull the power cord to disconnect the TV.
Pull it out by the plug.
Disconnect the power cord during lightning
storms or if you are not going to use the TV for
several days.
Install the TV in a stable position. Do not allow
children to climb onto it.
Do not plug in too many appliances to the same
power socket. Do not damage the power cord.
Clean the TV with a dry and soft cloth.
Do not use benzine, thinner, or any other chemicals
to clean the TV. Do not scratch the picture tube.
4
Using Your New TV
Getting Started
 Step 1
Connect the antenna
If you wish to connect a VCR, see the “Connecting a VCR” diagram below.
Using Your New TV
IEC connector
(not supplied)
To video and
audio outputs
VCR
 (yellow)
-L (MONO) (white)
-R (red)
Antenna cable (not supplied)
To  1
(video input)
Audio/Video cable
(not supplied)
: Signal flow
To antenna
output
Antenna cable
(not supplied)
Rear of TV
Rear of TV
Connecting a VCR
To watch the video, press … 
 (see page 12).
Note
• You are advised to use an outdoor antenna for better reception.
Rod antenna and cable
(supplied)
or
VIDEO
VIDEO IN
VIDEO OUT
AUDIO
L(MONO)
1
or
To ˘
(antenna)
: Signal flow
– 9 –
KV
-XF21M80/XF21M8J
RM-952
5
Using Your New TV
Using Y
our New TV
Notes
• If you connect a monaural VCR, connect the yellow plug to 
 (the
yellow jack) and the black plug to  -L (MONO) (the white jack).
• If you connect  a VCR  to the ˘ (antenna) terminal, preset the signal
output from the VCR to the program number 0 on the TV.
• When no signal is input to the connected video equipment, the TV screen
becomes blue.
Step 2
Note
• Do not use old batteries nor use different types of batteries together.
Step 3
CAUTION
Do not connect the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through the antenna
and other terminals to ground.
Insert the batteries
into the remote
Preset the channels automatically
Tips
• If you want to stop automatic channel presetting, press SELECT twice.
• If your TV has preset an unwanted channel or cannot preset a particular
channel, then preset your TV manually (see page 9).
Note
• During automatic channel presetting, your TV screen will indicate “B/G”,
“I”, “D/K” or “M” for the TV system.
Now You Are Ready. . .
To watch your TV, see page 11.
Front of TV
ONE-PUSH  AUTOMATIC  PROGRAMING
1
1
ONE-PUSH  AUTOMATIC  PROGRAMMING
1
2
VHF LOW B/G
6
Using Your New TV
Connecting optional components
You can connect optional audio/video components, such as a VCR, multi disc player,
camcorder, video game or stereo system.
To watch the picture of the connected equipment, press … 
 (see page 12).
Connecting a camcorder/video game equipment
using the 
 (video input) jacks
Note
• You can also connect video equipment to the … 1 (video input) jacks at
the rear of your TV.
Connecting audio/video equipment using the Ú
(monitor output) jacks
Note
• When connecting a monaural VCR, connect the yellow plug to 
 (the
yellow jack) and the black plug to   -L (MONO) (the white jack).
L(MONO)
1
ONE-PUSH  AUTOMATIC  PROGRAMING
ONE-PUSH  AUTOMATIC  PROGRAMING
2
Front of TV
Camcorder
Video game
equipment
To video and
audio outputs
 (yellow)
-L (MONO)
(white)
-R (red)
Rear of TV
To
antenna
output
To video and
audio inputs
or
Audio system
To
audio
inputs
VCR
:Signal flow
:Signal flow
To 2
(video input)
To Ú
(monitor
output)
or
Audio/Video cable (not supplied)
Antenna cable (not supplied)
Audio/Video cable
(not supplied)
or
– 10 –
KV
-XF21M80/XF21M8J
RM-952
8
Using Your New TV
Presetting
channels
You can preset up to 100 TV channels in
numerical sequence from program
number 1 using the remote and the
buttons on your TV as well.
TV
1
2
3
4
6
7
8
9
÷
0
5
JUMP
SOUND 
MODE
 
FAVORITE
PROGR
Á
u
Number buttons
SELECT
.
 +/–
PROGR +/–
+ or –
PIC MODE
ONE-PUSH  AUTOMATIC  PROGRAMING
Presetting channels automatically
1
Press U to turn on the TV.
2
Press AUTO PROGR.
Note
• During automatic channel presetting, your TV screen will indicate “B/G”,
“I”, “D/K” or “M” for the TV system.
To preset channels automatically from a specified program number
(1) Press SELECT until “AUTO PROGRAM” appears.
(2) Press + or –.
The on-screen display will start flashing.
(3) Press PROGR +/– or the number buttons until the desired program number
appears.
(4) Press + or –.
VHF LOW B/G
7
Using Your New TV
Using Y
our New TV
Securing the TV
To prevent the TV from falling, secure the TV using one of the following methods:
A
With the supplied screws, attach the band to the TV stand and to the rear of
the TV using the provided hole.
or
B
Put the cord or chain through the clamps to secure the TV against a wall or
pillar.
Note
• Use only the supplied screws. Use of other screws may damage the TV.
20
mm
A
B
3.8mm
or
– 11 –
KV
-XF21M80/XF21M8J
RM-952
9
Using Your New TV
Using Y
our New TV
Presetting channels manually
1
Press SELECT until
“MANUAL PROGRAM”
appears.
2
Press + or –.
3
Press PROGR +/– or the
number buttons until the
desired program number
appears.
4
Press + or – until the
desired channel picture
appears.
5
Press SELECT.
To change the TV system setting
If the picture or sound is abnormal when receiving programs through the ˘ (antenna)
terminal
(1) Press SELECT until “TV SYS” appears.
(2) Press + or – to select the appropriate TV system until the picture or sound quality
is optimal.
1
2
3
4
5
6
7
8
0
-/--
9
PROGR
or
1
SELECT
continued
B/G
I
D/K
M
MANUAL PROGRAM
SELECT
TV SYS: B/G
VHF LOW B/G
10
Using Your New TV
To change the color system setting
If the color is abnormal when receiving programs through the ˘ (antenna) terminal
or the … (video input) jack
(1) Press SELECT until “COL SYS” appears.
(2) Press + or – to select the appropriate color system until the color is optimal.
Tip
• Normally set “COL SYS” to “AUTO”.
Presetting channels (continued)
AUTO
PAL
SECAM
NTSC 3.58
NTSC 4.43
COL SYS: AUTO
Skipping program numbers
1
Press PROGR +/– or the number buttons until the unused or unwanted
program number appears.
2
Press SELECT until “MANUAL PROGRAM” appears.
3
Press + or –.
4
Press PIC MODE.
5
Press SELECT.
To preset the skipped program number again
Preset the channel automatically or manually.
Tip
• You can also use SELECT and . +/– on the TV to preset channels and
skip program numbers.
To use the fine tuning (FINE) function
The fine tuning (FINE) function may help to reduce the following problems: double
images and lines moving across the TV screen.
You can use the fine tuning function as below:
1) Select the program number you want to adjust.
2) Press SELECT until “MANUAL PROGRAM” appears on the screen.
3) Press + or – on the remote control once.
4) Press 
 
 to display “FINE” on the screen.
5) Press + or – continuously until the above problems are minimized.
The + or – icon on the screen flashes while tuning.
6) Press SELECT to return to normal screen.
Page of 46
Display

Click on the first or last page to see other KV-XF21M80 (serv.man3) service manuals if exist.