Sony KV-XA29K94 Service Manual ▷ View online
–
9
–
–
KV
-XA29K94/XA34K94
-XA29K94/XA34K94
RM-962
6
Using Your New TV
1
2
3
R
L
Y
C
B
C
R
COMPONENT VIDEO(DVD) IN
AUDIO
VIDEO
VIDEO
IN
MONITOR
OUT
S VIDEO
or
: Signal flow
Video game
equipment
equipment
Camcorder
To video and
audio outputs
audio outputs
To S VIDEO
input
input
To VIDEO 3 INPUT
Audio/Video cable (not supplied)
S video cable (not supplied)
Front of TV
To S video output
PROGR
MENU
AUTO
PROGR
PROGR
ENTER
SELECT
L(MONO)
3
L(MONO)
VIDEO
S VIDEO
VIDEO 3 INPUT
R
AUDIO
VIDEO (yellow)
AUDIO-L (MONO)
AUDIO-L (MONO)
(white)
AUDIO-R (red)
Rear of TV
To 8
(antenna)
(antenna)
To video and
audio inputs
audio inputs
Audio system
To
audio
inputs
audio
inputs
VCR
: Signal flow
To
MONITOR
OUT
MONITOR
OUT
Antenna cable (not supplied)
Audio/Video cable
(not supplied)
(not supplied)
or
To antenna output
Connecting optional components
You can connect optional audio/video components, such as a VCR, multi disc player,
DVD, camcorder, video game, or stereo system.
To watch the video input from the connected equipment, press VIDEO (see page 12).
Connecting a camcorder/video game equipment
using the VIDEO 3 INPUT jacks
using the VIDEO 3 INPUT jacks
Notes
• When both the S VIDEO input and VIDEO 3 INPUT at the front of your
• When both the S VIDEO input and VIDEO 3 INPUT at the front of your
TV are input at the same time, the S VIDEO input is automatically
selected. To view the video input to VIDEO 3 INPUT, disconnect the S
video cable.
selected. To view the video input to VIDEO 3 INPUT, disconnect the S
video cable.
• You can also connect video equipment to the VIDEO IN 1, 2, or 3 jacks at
the rear of your TV.
• Do not connect video equipment to the VIDEO 3 INPUT jacks at the front
and the VIDEO IN 3 jacks at the rear of your TV at the same time;
otherwise the picture will not be displayed properly on the screen.
otherwise the picture will not be displayed properly on the screen.
Connecting audio/video equipment using the
MONITOR OUT jacks
MONITOR OUT jacks
Note
• If you select “DVD” on your TV screen, no signal will be output at the
• If you select “DVD” on your TV screen, no signal will be output at the
MONITOR OUT jacks (see page 12).
Antenna adapter (supplied)
7
Using Your New TV
Using Y
our New TV
Connecting a DVD player using the VIDEO IN 1, 2
or 3 jacks
or 3 jacks
Connect VIDEO IN 1, 2 or 3 AUDIO/VIDEO connectors on your TV to LINE OUT on
your DVD player.
your DVD player.
Notes
• Since the high quality pictures on a DVD disc contain a lot of information,
• Since the high quality pictures on a DVD disc contain a lot of information,
picture noise may appear. In this case, adjust the sharpness (“SHARP”)
under “PERSONAL ADJUST” in the “PICTURE MODE” menu (see
page 24).
under “PERSONAL ADJUST” in the “PICTURE MODE” menu (see
page 24).
• Connect your DVD player directly to your TV. Connecting the DVD
player through other video equipment will cause unwanted picture noise.
continued
DVD player
To VIDEO IN 1, 2 or 3
: Signal flow
Audio/Video cable
(not supplied)
(not supplied)
Rear of TV
VIDEO (yellow)
AUDIO-L (MONO) (white)
AUDIO-R (red)
AUDIO-L (MONO) (white)
AUDIO-R (red)
To video and
audio outputs
audio outputs
VIDEO
R-AUDIO-L
LINE OUT
R
L
Y
C
B
C
R
COMPONENT VIDEO(DVD) IN
AUDIO
L (MONO)
R
VIDEO
VIDEO
IN
MONITOR
OUT
1
S VIDEO
2
3
–
10
–
KV
-XA29K94/XA34K94
-XA29K94/XA34K94
RM-962
8
Using Your New TV
Connecting optional components (continued)
To component
video output
video output
Component video cable
(not supplied)
(not supplied)
DVD player
To audio
output
output
Audio cable
(not supplied)
(not supplied)
: Signal flow
Rear of TV
VIDEO
R-AUDIO-L
LINE OUT
Y
COMPONENT VIDEO OUT
S VIDEO OUT
C
B
C
R
R
L
Y
C
B
C
R
COMPONENT VIDEO(DVD) IN
Connect
To (on the DVD player)
Y (green)
Y
C
B
(blue)
C
b
, B-Y or P
B
C
R
(red)
C
r
, R-Y or P
R
Connecting a DVD player using the COMPONENT VIDEO
(DVD) IN jacks
(DVD) IN jacks
1 Using an audio cable, connect R and L under the COMPONENT VIDEO (DVD) IN
jacks on your TV to the LINE OUT, AUDIO R and L output connectors on your
DVD player.
DVD player.
2 Using a component video cable, connect Y, C
B
, and C
R
under the COMPONENT
VIDEO (DVD) IN jacks on your TV to the COMPONENT VIDEO OUT Y, C
B
, and
C
R
output connectors on your DVD player.
3 Press VIDEO on the remote or TV/VIDEO on the TV until “DVD” appears on the
screen.
Notes
• Some DVD player terminals may be labeled differently:
• Some DVD player terminals may be labeled differently:
• When connecting to the COMPONENT VIDEO (DVD) IN jacks on your
TV, you must connect Y, C
B
, and C
R
to receive the video signals, and
connect L and R to receive analog audio signals.
To COMPONENT VIDEO
(DVD) IN
(DVD) IN
9
Using Your New TV
Using Y
our New TV
Securing the TV
To prevent the TV from falling, secure the TV using one of the following methods:
A
With the supplied screws, attach the stabilizer band to the TV stand and to
the rear of the TV using the provided hole.
the rear of the TV using the provided hole.
OR
B
Put the cord or chain through the clamps to secure the TV against a wall or
pillar.
pillar.
Note
• Use only the supplied screws. Use of other screws may damage the TV.
• Use only the supplied screws. Use of other screws may damage the TV.
A
B
OR
3.8 mm
20
mm
mm
–
11
–
KV
-XA29K94/XA34K94
-XA29K94/XA34K94
RM-962
10
Using Your New TV
Presetting the
channels
manually
channels
manually
To receive a new channel or a channel
with a weak signal, preset the channel
manually.
with a weak signal, preset the channel
manually.
1
Press number buttons to
select the desired channel
number, then press ENTER.
select the desired channel
number, then press ENTER.
2
Press ADD/ERASE.
“+” appears beside the
channel number, indicating
that presetting is complete.
channel number, indicating
that presetting is complete.
Disabling channel numbers
By disabling unused or unwanted channel numbers, you can skip those channel
numbers when you press CH +/–.
numbers when you press CH +/–.
1
Press CH +/– until the
unused or unwanted
channel number
appears on the screen.
unused or unwanted
channel number
appears on the screen.
2
Press ADD/ERASE.
“–” appears beside the
channel number, indicating
that disabling is complete.
channel number, indicating
that disabling is complete.
To cancel the skip setting
Preset the channel again.
Tip
• You can also preset the channels manually using the menu (see Adjusting
• You can also preset the channels manually using the menu (see Adjusting
each channel number settings (CHANNEL SETUP)
on page 29).
ADD/ERASE
ENTER
CH +/–
Number
buttons
buttons
2
3
1
5
6
4
8
9
7
0
ENTER
JUMP
TV/VIDEO FREEZE
SWAP
PIP
CH
VOL
MENU
FAVORITE
SURROUND
AUTO PROGR ADD/ERASE
CABLE
WAKE UP
SOUND
MODE
PIP CH
PIP CH
SLEEP
+25
ADD/ERASE
–25
ADD/ERASE
1
4
7
2
5
8
0
3
6
9
11
Using Your New TV
Using Y
our New TV
Watching the TV
This section explains various functions
and operations available while watching
the TV. Most operations can be done
using the remote.
and operations available while watching
the TV. Most operations can be done
using the remote.
1
Press POWER on the TV to turn
on the TV.
on the TV.
When the TV is in standby mode
(the STANDBY indicator on the
TV is lit red), press POWER on
the remote or CHANNEL +/– on
the TV.
(the STANDBY indicator on the
TV is lit red), press POWER on
the remote or CHANNEL +/– on
the TV.
2
To select the channel
number, press the number
buttons and then press
ENTER, or press CH +/–.
number, press the number
buttons and then press
ENTER, or press CH +/–.
To select a channel number quickly
(1) Press and hold CH +/–.
(2) Release CH +/– when the desired channel number appears.
(2) Release CH +/– when the desired channel number appears.
Note
• When you select a channel number quickly, the picture may
• When you select a channel number quickly, the picture may
be disrupted. This does not indicate a malfunction.
or
STANDBY/
STEREO/
WAKE UP
indicator
STEREO/
WAKE UP
indicator
DISPLAY
CHANNEL
VOLUME
MENU
AUTO
PROGR
PROGR
TV/IDEO
RETURN
SELECT
POWER
L(MONO)
3
CHANNEL
MENU
VOLUME
TV/VIDEO
AUTO
PROGR
RETURN
SELECT
POWER
2
3
1
5
6
4
8
9
7
0
ENTER
JUMP
MUTING
MTS
VIDEO
PIC
MODE
TV/VIDEO FREEZE
SWAP
PIP
TV
DISPLAY
POWER
CH
VOL
MENU
FAVORITE
SURROUND
AUTO PROGR ADD/ERASE
CABLE
WAKE UP
SOUND
MODE
PIP CH
PIP CH
SLEEP
POWER
1
4
7
2
5
8
0
3
6
9
MUTING
POWER
TV
Number
buttons
buttons
ENTER
JUMP
V/v/
MENU
CH +/–
VOL +/–
SLEEP
WAKE UP
VIDEO
continued
–
12
–
KV
-XA29K94/XA34K94
-XA29K94/XA34K94
RM-962
12
Using Your New TV
Additional tasks
To
Turn off temporarily
Turn off completely
Adjust the volume
Mute the sound
Watch the video input
(VCR, camcorder, etc.)
Jump back to the previous channel number
Display the on-screen information*
* Some picture/sound settings, and either the program number or video
mode are displayed. The on-screen display for the picture/sound settings
disappears after about 3 seconds.
disappears after about 3 seconds.
Changing the menu language
You can change the menu language as well as the on-screen language. For details on
how to use the menu, see Introducing the menu system on page 20.
how to use the menu, see Introducing the menu system on page 20.
1
Press MENU.
2
Press V or v to select the
SETUP icon (
SETUP icon (
), then
press
.
3
Make sure “
/
LANGUAGE” is selected,
then press
then press
.
4
Press V or v to select the
desired language
(e.g.,”ENGLISH“), then
press
desired language
(e.g.,”ENGLISH“), then
press
.
The selected menu
language appears.
language appears.
To return to the normal screen
Press MENU.
Press
POWER on the remote.
The STANDBY indicator on the TV lights up red.
POWER on the TV.
VOL +/–.
MUTING.
VIDEO (or TV/VIDEO on the TV) to select “VIDEO 1”,
“VIDEO 2”, “VIDEO 3” or “DVD”. To return to the TV
screen, press TV (or TV/VIDEO on the TV).
JUMP.
DISPLAY.
H
G L I S
EN
E
S E T UP
CHANNE L S E T UP
P I C ROT A T I O N
NG L I SH
L ANGUAGE :
Watching the TV (continued)
+
+
+
+
+
+
+
+
+
+
+
MENU
13
Using Your New TV
Using Y
our New TV
Setting the Wake Up timer
1
Press WAKE UP until the
desired period of time
appears.
desired period of time
appears.
The Wake Up timer starts
immediately after you
have set it.
immediately after you
have set it.
2
Select the channel number or video input you want to wake up to.
3
Press POWER, or set the Sleep timer if you want the TV to turn off
automatically.
automatically.
The WAKE UP indicator on the TV lights up orange.
To cancel the Wake Up timer
Press WAKE UP until “WAKE UP TIMER: OFF” appears, or turn off
the TV’s main power.
the TV’s main power.
Note
• If no buttons or controls are pressed for more than two hours after the TV
• If no buttons or controls are pressed for more than two hours after the TV
is turned on using the Wake Up timer, the TV automatically goes into
standby mode. To resume watching the TV, press any button or control on
the TV or the remote.
standby mode. To resume watching the TV, press any button or control on
the TV or the remote.
Setting the Sleep timer
Press SLEEP until the
desired period of time
appears.
desired period of time
appears.
The Sleep timer starts
immediately after you
have set it.
immediately after you
have set it.
To cancel the Sleep timer
Press SLEEP until “SLEEP TIMER: OFF” appears, or turn the TV off.
WAKE UP TIMER:10M
WAKE UP TIMER:OFF
WAKE UP TIMER:12H00M
After 10 minutes
No Wake Up Timer
After 12 hours
WAKE UP
SLEEP
SLEEP TIMER:30M
SLEEP TIMER:OFF
SLEEP TIMER:90M
After 30 minutes
SLEEP TIMER:60M
After 60 minutes
No Sleep Timer
After 90 minutes
Click on the first or last page to see other KV-XA29K94 service manuals if exist.