DOWNLOAD Sony KV-XA25M80A Service Manual ↓ Size: 4.5 MB | Pages: 76 in PDF or view online for FREE

–

 9 
–

Using Your New TV

7

Notes
•

If your DVD player can output interlace and progressive mode signals, select
the interlace output when connecting to 

 (component video input) on your

TV. Your TV can receive either 525i/60Hz or 625i/50Hz interlace signals.

•

Some DVD player terminals may be labeled differently:

•

Since the high quality pictures on a DVD disc contain a lot of information,
picture noise may appear. In this case, adjust the sharpness (see Adjusting the
picture and sound settings

 on page 16).

1 Connect R and L under 

 (component video input) on your TV to the LINE OUT,

AUDIO R and L output connectors on your DVD player.

2 Connect Y, C

B

, and C

R

 under 

 (component video input) on your TV to the

COMPONENT VIDEO OUT Y, C

B

, and C

R

 output connectors on your DVD player.

Y (green)

Y

C

B

 (blue)

C

b

, B-Y or P

B

C

R

 (red)

C

r

, R-Y or P

R

Connecting a DVD player using the t (video input) jacks

 (yellow)

To t 1 or 2
(video input)

VIDEO 

R-AUDIO-L

LINE  OUT

VIDEO 

R-AUDIO-L

LINE  OUT

Y 

COMPONENT VIDEO OUT

S VIDEO OUT

C

B

 

C

R

 

Using Your New TV

6

You can connect optional audio/video components, such as a VCR, multi disc player,
DVD, camcorder, video game or stereo system.
To watch the video input of the connected equipment, press t (see page 13).

Connecting a camcorder/video game equipment
using the t (video input) jacks

Notes
• You can also connect video equipment to the t 1 or 2 (video input) jacks

at the rear of your TV.

• Do not connect video equipment to the t 2 (video input) jacks at the

front and the rear of your TV at the same time; otherwise the picture will
not be displayed properly on the screen.

Connecting audio/video equipment using the T
(monitor output) jacks

PROGR

MENU

AUTO
PROGR

L(MONO)

2

L (MONO)

R

2

t

To T
(monitor
output)

Note
• If you select “DVD” on your TV screen, the signal from the T

(monitor output) jack will not be output properly. This does not indicate a
malfunction.

–

 10 

–

Using Your New TV

9

You can preset up to 100 TV channels in
numerical sequence from program
number 1 using the remote and the
buttons on your TV as well.

Press ! to turn on the TV.

Press AUTO PROGR.

Note
• During automatic channel presetting, your TV screen will indicate “B/G”,

“I”, “D/K” or “M” for the TV system.

(1) Press SELECT until “AUTO PROGRAM” appears.

(2) Press + or – to enter the “AUTO PROGRAM” mode.

The on-screen display will start flashing.

(3) Press PROGR +/– or the number buttons until the desired program number

appears.

(4) Press + or – to start presetting channels automatically.

TV

1

2

3

4

6

7

8

9

0

5

JUMP

SOUND 

MODE

 

FAVORITE

PROGR

?/1

2

L(MONO)

R

2

PROGR

MENU

AUTO
PROGR

AUTO

PROGR

Using Your New TV

8

To prevent the TV from falling, secure the TV using one of the following methods:

A

With the supplied screws, attach the band to the TV stand and to the rear of
the TV using the provided hole.

B

Put the cord or chain through the clamps to secure the TV against a wall or
pillar.

Note
• Use only the supplied screws. Use of other screws may damage the TV.

A

B

–

 11 

–

Using Your New TV

10

Press SELECT until
“MANUAL PROGRAM”
appears.

Press + or – to enter the
“MANUAL PROGRAM”
mode.

Press PROGR +/– or the
number buttons until the
desired program number
appears.

Press + or – until the
desired channel picture
appears.

Press SELECT to exit the
“MANUAL PROGRAM”
mode.

If the picture or sound is abnormal when receiving programs through the 8 (antenna
input) terminal.

(1) Press SELECT until “TV SYS” appears.

(2) Press + or – to select the appropriate

TV system until the picture or sound
quality is optimal.

PROGR

SELECT

SELECT

Using Your New TV

11

If the color is abnormal when receiving programs through the 8 (antenna input)
terminal or the t (video input) jack

(1) Press SELECT until “COLOR SYS” appears.

(2) Press + or – to select the appropriate

color system until the color is
optimal.

Tip
• Normally set “COLOR SYS” to “AUTO”.

Press PROGR +/– or the number buttons until the unused or unwanted
program number appears.

Press SELECT until “MANUAL PROGRAM” appears.

Press + or – to enter the “MANUAL PROGRAM” mode.

Press PIC MODE.

Press SELECT to exit the “MANUAL PROGRAM” mode.

Note
• To restore the skipped program number again, preset the channel

automatically or manually.

Tip
• You can also use SELECT and 2 +/– on the TV to preset channels and

skip program numbers.

The fine tuning (FINE) function may help to reduce the following problems:
double images and lines moving across the TV screen.
You can use the fine tuning function as below:
(1) Select the program number you want to adjust.
(2) Press SELECT until “MANUAL PROGRAM” appears.
(3) Press + or – to enter the “MANUAL PROGRAM” mode.
(4) Press 

 to display “FINE” on the screen.

(5) Press + or – continuously until the above problems are minimized.

The + or – icon on the screen flashes while tuning.

(6) Press SELECT to exit the “MANUAL PROGRAM” mode.

–

 12 

–

Using Your New TV

12

This section explains functions used
while watching the TV. Most operations
can be done using the remote.

Press ! to turn on the TV.

When the TV is in the
standby mode (the 1
indicator on the TV is lit
red), press ?/1 on the
remote or PROGR +/– on
the TV.

Press PROGR +/– or the
number buttons to select
the program number.

For double digit numbers,
press -, then the number
(e.g., for 25, press -, then
2 and 5).

Press 2 +/– to adjust the
volume.

%

?/1

t

a

2 +/–

PROGR

MENU

AUTO
PROGR

L(MONO)

2

PROGR

SELECT

AUTO

PROGR

TV

1

2

3

4

6

7

8

9

0

5

JUMP

SOUND 

MODE

 

FAVORITE

PROGR

 1

PROGR

Using Your New TV

13

Turn off temporarily

Turn off completely

Mute the sound

Watch the video input
(VCR, camcorder, etc.)

Jump back to the previous program
number

Display the on-screen information*

Adjust the volume of all
program numbers automatically

Adjust the picture position when it
is not aligned to the TV screen

?/1

. The 1 indicator on the TV lights up red.

!

 on the TV.

%

.

t to select “VIDEO 1” , “VIDEO 2” or DVD.
To return to the TV program, press a or t on the TV.

JUMP.

.

SELECT repeatedly until “INTELLIGENT VOL”
appears, then press + or – to select “ON”.
To cancel, select “OFF”.

SELECT repeatedly until “PIC ROTATION” appears,
then press + or – to adjust the alignment of the picture
position.

The

 or 

 icon on the screen flashes while

adjusting.

* The picture, sound, and either the program number or video input are

displayed. The on-screen display for the picture and sound information
disappears after about three seconds.