DOWNLOAD Sony KV-PG14M40 Service Manual ↓ Size: 3.65 MB | Pages: 52 in PDF or view online for FREE

– 9 –

I

You can turn on and off your TV by using the   and   buttons respectively.

Press   until the desired period of time appears
on the screen.

The Wake Up timer starts immediately after you
have set it.

Select the program number or video input you
want to wake up to.

Press \/1, or set the Sleep timer if you want the
TV to turn off automatically.

The   indicator on the TV lights up orange when
the TV goes into standby mode.

Press   until the desired period of time appears
on the screen.

The Sleep timer starts immediately after you have
set it.

Notes
• You can also cancel the Wake Up and Sleep timers by turning off the TV’s main power.
• If no buttons or controls are pressed for more than two hours after the TV is turned on using

the Wake Up timer, the TV automatically goes into standby mode.

\

/1

TV

1

2

3

4

6

7

8

9

-

0

5

JUMP

SOUND 

MODE

 

FAVORITE

PROGR

2

J

You can automatically preset up to 100 TV channels in numerical sequence
from program number 1, or manually preset desired channels and channels
that cannot be preset automatically.

Press SELECT until “AUTO PROGRAM” appears
on the screen.

Press + or – once to enter the “AUTO
PROGRAM” mode.

The on-screen display will start flashing.

Press PROGR +/– or the number buttons until
the desired program number appears on the
screen.

Press + or – to start presetting channels
automatically.

Press SELECT until “MANUAL PROGRAM”
appears on the screen.

Press + or – once to enter the “MANUAL
PROGRAM” mode.

Press PROGR +/– or the number buttons until
the desired program number appears on the
screen.

Press + or – until the desired channel picture
appears on the screen.

To preset other channels manually, repeat steps
3 to 4.

TV

1

2

3

4

6

7

8

9

-

0

5

JUMP

SOUND 

MODE

 

FAVORITE

PROGR

2

If the picture or sound is abnormal when receiving programs through the 8 (antenna)
terminal

(1) Press SELECT until “TV SYS” appears on the screen.

(2) Press + or – to select the appropriate TV system until the picture or sound quality

is optimal.

If the color is abnormal when receiving programs through the 8 (antenna) terminal
or the t (video input) terminal

(1) Press SELECT until “COLOR SYS” appears on the screen.

(2) Press + or – to select the appropriate color system until the color is optimal.

(1) Press PROGR +/– or the number buttons until the unused or unwanted program

number appears on the screen.

(2) Press SELECT until “MANUAL PROGRAM” appears on the screen.

(3) Press + or – once to enter the “MANUAL PROGRAM” mode.

(4) Press PIC MODE to skip the unused or unwanted program number.

(5) Press SELECT to exit the “MANUAL PROGRAM” mode.

Note
• To restore the skipped program number again, preset the channel automatically or manually.

The fine tuning (FINE) function may help to reduce the following problems:
double images and lines moving across the TV screen.

You can use the fine tuning function as below:

(1) Select the program number you want to adjust.

(2) Press SELECT until “MANUAL PROGRAM” appears on the screen.

(3) Press + or – once to enter the “MANUAL PROGRAM” mode.

(4) Press   to display “FINE” on the screen.

(5) Press + or – continuously until the above problems are minimized.

The + or – icon on the screen flashes while tuning.

(6) Press SELECT to exit the “MANUAL PROGRAM” mode.

(KV-PG14M40/PG14M72)

If the color is abnormal when receiving programs through the 8 (antenna) terminal
or the t (video input) terminal

(1) Press SELECT until “COLOR SYS” appears on the screen.

(2) Press + or – to select the appropriate color system until the color is optimal.

(1) Press PROGR +/– or the number buttons until the unused or unwanted program

number appears on the screen.

(2) Press SELECT until “MANUAL PROGRAM” appears on the screen.

(3) Press + or – once to enter the “MANUAL PROGRAM” mode.

(4) Press PIC MODE to skip the unused or unwanted program number.

(5) Press SELECT to exit the “MANUAL PROGRAM” mode.

Note
• To restore the skipped program number again, preset the channel automatically or manually.

The fine tuning (FINE) function may help to reduce the following problems:
double images and lines moving across the TV screen.

You can use the fine tuning function as below:

(1) Select the program number you want to adjust.

(2) Press SELECT until “MANUAL PROGRAM” appears on the screen.

(3) Press + or – once to enter the “MANUAL PROGRAM” mode.

(4) Press   to display “FINE” on the screen.

(5) Press + or – continuously until the above problems are minimized.

The + or – icon on the screen flashes while tuning.

(6) Press SELECT to exit the “MANUAL PROGRAM” mode.

(KV-PG14P42 only)

– 10 –

Press SELECT until the desired setting appears.

Each time you press SELECT, the setting item will change as follows:

Press + or – to adjust the item.

To adjust other items, repeat steps 1 to 2.

Notes
• “BASS”, “TREBLE” and “BALANCE” can be adjusted for KV-TG21P52 only.
• “HUE” can be adjusted for the NTSC color system only.
• Reducing “SHARP” can also reduce picture noise.

K

You can customize the picture and sound by selecting the picture and sound
modes or by adjusting its settings.

Press PIC MODE to select the desired picture mode.

“DYNAMIC”

view high contrast pictures.

“STANDARD”

view normal contrast pictures.

“SOFT”

view mild pictures.

B

Press SOUND MODE to select the desired sound
mode.

“9 DYNAMIC”

listen to dynamic and clear
sound that emphasizes the low
and high sound.

“9 DRAMA”

listen to sound that emphasizes
vocals and background music.

“9 SOFT”

listen to soft sound.

TV

1

2

3

4

6

7

8

9

-

0

5

JUMP

SOUND 

MODE

 

FAVORITE

PROGR

2

(Not used for this model)

L

You can enjoy bilingual program of A2 bilingual system by using the A/B
button.

A2
bilingual

Note
• When viewing a non-bilingual program, select the main sound. Otherwise, you may hear

some noise or abnormal sound.

TV

1

2

3

4

6

7

8

9

-

0

5

JUMP

SOUND 

MODE

 

FAVORITE

PROGR

2

MAIN

(Main sound)

SUB

(Sub sound)

t

t

(KV-PG14P42/
PG14P42/G/L/N)

M

You can enjoy stereo sound or bilingual programs of NICAM and A2 stereo
systems by using the A/B button.

NICAM
stereo
(KV-TG21M90 only)

NICAM
bilingual

NICAM
monaural

B 

A2
stereo

A2
bilingual

Notes
• If the sound is distorted when receiving a monaural program through the 8 (antenna)

terminal, press A/B repeatedly until “MONO” appears on the screen.  To cancel the monaural
sound setting, press A/B again until “AUTO” appears on the screen.

KV-TG21M90 only (Not used for this model)
• If the stereo sound is noisy when receiving a stereo program, select “MONO”.  The sound

becomes monaural, but the noise is reduced.

• Before receiving a NICAM stereo program in China, please check the NICAM broadcast

condition in your area.  When receiving a NICAM stereo program, the receiving conditions
might vary depending on area.  In addition, different strength of the NICAM broadcast signal
might affect the receiving quality.

TV

1

2

3

4

6

7

8

9

-

0

5

JUMP

SOUND 

MODE

 

FAVORITE

PROGR

2

NICAM

(Stereo sound)

MONO

(Regular sound)

t

t

NICAM MAIN

(Main sound)

NICAM SUB
(Sub sound)

MONO

(Regular sound)

t

t

t

NICAM MAIN

(Main sound)

MONO

(Regular sound)

t

t

MONO

(Regular sound)

STEREO

(Stereo sound)

t

t

MAIN

(Main sound)

SUB

(Sub sound)

t

t

(KV-PG14M72/PG14M72/N/L)

(Not used for this model)

– 11 –

1 Eight screws

(+BVTP 4 

× 16)

1 Rear Cover

1 Four screws 

washer head
(BVTP 3 

× 12)     

CRT SUPPORT BLOCK

Speaker

Push claw

 Do not take out CRT support block while TV set in

standing position.

 Undress necessary wires that creates tension while

placing the chassis into Service Position.

F Board
(KV-PG14M72/
PG14M72/L/N only)

1 One screw

(+BVTP 4 

× 16)

2 Terminal Bracket

–

 12 

–

For replacements of light guide,unscrew them, exchange with
new parts and fix them with screws respectively.

•

Please make sure the TV set is not in standing position before removing necessary
CRT support located on bottom right and left.

One screw
(+BVTP 3 

× 12)

1

Push to direction of arrow 
and remove

!™

 

!£

8

Demagnetic coil

4 Four screws 

(washer head)
(BVTP 3 

× 12)

!º

Two screws
(Tapping 5+
Crown Washer)

3 Speaker

(5 

× 9cm)

6 Tension

spring

7

Chassis assy

5 Deflection

yoke

2

C board

Coating earth assy

!∞

Picture tube

!¢ Cushion

9Two screws

(Tapping 5 +
Crown Washer) 

!¡

Holder DGC

Cushion DGC

  Cushion DGC

A Board

Slim Beznet

CRT Support Block

!ª

Anode 
cap

Screw Location