DOWNLOAD Sony KV-PF14N70 Service Manual ↓ Size: 2.82 MB | Pages: 53 in PDF or view online for FREE

– 9 –

5

Using Your New TV

Notes
• If you connect a stereo VCR, connect the yellow plug to VIDEO

(the yellow jack) and the white plug to AUDIO (the black jack).

• When no signal is input to the connected video equipment, the TV screen

becomes blue.

Do not connect the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through the antenna
and other terminals to ground.

Note
• Do not use old batteries nor use different types of batteries together.

Tips
• If you want to stop automatic channel presetting, press SELECT once.
• If your TV has preset an unwanted channel or cannot preset a particular

channel, then preset your TV manually (see page 9).

• The AUTO PROGRAM button on the remote works as the AUTO

PROGRAM button on the TV.

6

Using Your New TV

You can connect optional video components, such as a VCR, multi disc player,
camcorder or video game.

To watch the picture of the connected equipment, press VIDEO (see page 11).

Note
• With the “VIDEO MULTI SYSTEM” input terminal, you can also receive

PAL, NTSC and SECAM video signals when using the VIDEO IN 1 jacks
at the rear of your TV or the VIDEO 2 INPUT jacks .

• You can also connect video equipment to the VIDEO IN 1 jacks at the rear

of your TV.

Note
• When connecting a stereo VCR, connect the yellow plug to VIDEO (the

yellow jack) and the white plug to AUDIO (the black jack).

– 10 –

8

Using Your New TV

You can preset up to 125 TV channels in
numerical sequence from program
number 1 using the remote and the
buttons on your TV as well.

Press POWER on the TV to
turn on the TV.

Press CABLE to select
“CABLE: ON”.

Press AUTO PROGRAM.

Notes
•

If you select “CABLE: ON”, you will receive cable TV program.
If there is no cable TV programs, you will receive VHF or UHF broadcast
channel.

•

If you select “CABLE: OFF”, you will receive VHF or UHF broadcast
channels only.

TV

1

2

3

4

6

7

8

9

0

5

CABLE

AUTO

PROGRAM

(ƒ

˚ W„D O —

)

(ƒ‡‰u„q ł

)

7

Using Your New TV

To prevent the TV from falling, secure the TV using one of the following methods:

A

With the supplied screws, attach the band to the TV stand and to the rear of
the TV using the provided hole.

B

Put the cord or chain through the clamps to secure the TV against a wall or
pillar.

Note
• Use only the supplied screws. Use of other screws may damage the TV.

A

B

– 11 –

9

Using Your New TV

To receive a new channel or a channel with a weak signal, preset the channel
manually.

Press number buttons to select the desired channel, then press ENT.

Press ADD/ERASE.

“+” appears beside the
channel number, indicating
that presetting is complete.

By disabling unused or unwanted channels, you can skip those channels when you
press CH +/–.

Press CH +/– until the unused or unwanted channel appears on the screen.

Press ADD/ERASE.

“–” appears beside the
channel number, indicating
that disabling is complete.

Preset the channel automatically again.

ADD/

ERASE

ADD/

ERASE

( O —¡ §R £

)

( W„D

)

(…˘ƒr`)

TV

1

2

3

4

6

7

8

9

0

5

10

Using Your New TV

Press POWER to turn on
the TV.

When the TV is in the
standby mode (the STANDBY
indicator on the TV is lit red),
press POWER on the remote
or CHANNEL +/– on the TV.

To select  the TV program,
press the number buttons
and then press ENT, or
press CH +/–.

Press VOL +/– to adjust
the volume.

This section explains functions used
while watching the TV. Most operations
can be done using the remote.

 (R› )

TV

1

2

3

4

6

7

8

9

0

5

VOL

CH

 

(› ¶q

)

(…˘ƒr`)

 (

¯ª¥ )

  (

„q•‰

)

  (

…v› )

 

( W„D

)

 (¥\fl ¿

)

(¶}

'wfi)

  (

”˛flv'wfi)

  (

„q ł

)

– 12 –

12

Using Your New TV

Press WAKE UP until the
desired period of time
appears.

Select the TV program or video mode you want to display when you wake
up.

Press POWER on the remote or set the Sleep timer if you want the TV to turn
off automatically.

The WAKE UP indicator on the TV lights up orange.

Press WAKE UP until “WAKE UP TIMER: OFF” appears or turn off
the TV’s main power.

Notes
•

The Wake Up timer starts immediately after the on-screen display
disappears.

•

If no buttons or controls are pressed for more than two hours after the
TV is turned on using the Wake Up timer, the TV automatically goes into
the standby mode.  To continue watching the TV, press any button or
control on the TV or the remote.

Press SLEEP until the
desired period of time
appears.

Press SLEEP until “SLEEP TIMER:  OFF” appears or turn the TV off.

WAKE UP

SLEEP

11

Using Your New TV

Turn off temporarily

Turn off completely

Mute the sound

Watch the video input
(VCR, camcorder, etc.)

Change the color system setting
(for the VIDEO INPUT jack only)

Jump back to the previous channel

Display the on-screen information*

Press POWER on the remote. The STANDBY indicator
on the TV lights up red.

Press POWER on the TV.

Press MUTING.

Press VIDEO to select “VIDEO 1” or “VIDEO 2”.
To return to the TV program, press TV.

Press SELECT repeatedly until “COL SYS” appears,
then press + or – to select the appropriate color system
until the color is optimal.

Press JUMP.

Press DISPLAY.

* The picture, sound, and either the program number or video mode are

displayed. The on-screen display for the picture and sound information
disappears after about 3 seconds.

Press SELECT until
“LANGUAGE/ 

 :

ENGLISH” appears on the
screen.

Press + or – to select
“ 

 “.

Tip
•

You can also use SELECT and VOL +/– on the TV to select the on-screen
display language.

SELECT