DOWNLOAD Sony KV-HW21P20A Service Manual ↓ Size: 3.94 MB | Pages: 53 in PDF or view online for FREE

Sony KV-HA21P20A_(GB)_4-098-741-11 (1) Group P21

A

Plug in the power cord, then press ! on the TV to
turn it on.

Press SELECT and PROG +/– on the TV at the same time
for one to two seconds to preset the channels
automatically.  (See J)

Tip
• To stop the automatic channel presetting, press SELECT.

b

b

SELECT

Press SELECT on the remote until “LANGUAGE:
ENGLISH” appears on the screen, then press + or – to
change the on-screen display language.

Connect the antenna cable (not supplied) to 8
(antenna input) at the rear of the TV.

Tip
• You can also connect your TV to other optional components.

(See E)

Insert the batteries (supplied) into the remote.

Note
• Do not use old batteries nor use different types of batteries

together.

01GB01HW21-Pak.p65

19/8/03, 12:29 PM

2

Sony KV-HA21P20A_(GB)_4-098-741-11 (1) Group P21

B

• Dangerously high voltages are present inside the TV.
• TV operating voltage: 110 – 240 V AC.
• Do not plug in the power cord until you have completed making all other connections;

otherwise a minimum leakage current might flow through the antenna and other terminals to
ground.

• To avoid battery leakage and damage to the remote, remove the batteries from the remote if

you are not going to use it for several days.  If any liquid that leaks from the batteries touches
you, immediately wash it away with water.

Do not operate the TV if any liquid or solid object
falls into it.  Have it checked immediately by
qualified personnel only.

Do not open the cabinet and the rear cover of the
TV as high voltages and other hazards are
present inside the TV.  Refer servicing and
disposal of the TV to qualified personnel.

Your TV is recommended for home use only.
Do not use the TV in any vehicle or where it may
be subject to excessive dust, heat, moisture or
vibrations.

Do not block the ventilation openings of the TV.
Do not install the TV in a confined space, such
as a bookcase or built-in cabinet.

For children’s safety, do not leave children alone
with the TV.  Do not allow children to climb onto
it.

Clean the TV with a dry and soft cloth.  Do not use
benzine, thinner, or any other chemicals to clean
the TV.  Do not scratch the picture tube.

For your own safety, do not touch any part of the
TV, the power cord and the antenna cable during
lightning storms.

Do not place any objects on the TV. The apparatus
shall not be exposed to dripping or splashing and
that no objects filled with liquids, such as vases,
shall be placed on the apparatus.

01GB01HW21-Pak.p65

19/8/03, 12:29 PM

3

Sony KV-HA21P20A_(GB)_4-098-741-11 (1) Group P21

Install the TV on a stable TV stand and floor which
can support the TV set weight. Ensure that the TV
stand surface is flat and its area is larger than the
bottom area of the TV.

C

To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV.

Screw the band to the TV stand and to the
provided hole at the rear of your TV.

(1) Put a cord or chain through the

clamps.

(2) Screw one clamp to a wall or pillar

and the other clamp to the provided
hole at the rear of your TV.

Note
• Use only the supplied screws.  Use of other screws may damage the TV.

Do not plug in too many appliances to the same
power socket.  Do not damage the power cord.

Pull the power cord out by the plug.  Do not pull
the power cord itself.  Even if your TV is turned
off, it is still connected to the AC power source
(mains) as long as the power cord is plugged in.
Unplug the TV before moving it or if you are not
going to use it for several days.

To prevent fire or shock hazard, do not expose
the TV to rain or moisture.

01GB01HW21-Pak.p65

19/8/03, 12:29 PM

4

Sony KV-HA21P20A_(GB)_4-098-741-11 (1) Group P21

L

R

(MONO)

2

L

R

(MONO)

9

0

3 2

4

8

7

6

5

1

D

1

!

Turn off or turn on the TV.

2

Remote control sensor.

3

Wake Up indicator.

3

1

Standby indicator.

5

PROG +/–

Select program number.

6

2

 +/– *

Adjust volume.

7

t

Select TV or video input.

8

SELECT

Select the desired item.

4

, 

9

t

Video input terminal.

0

8

Antenna input terminal.

* You can also use the 2 +/– buttons on the TV to work as the +/– buttons on the remote.

01GB01HW21-Pak.p65

19/8/03, 12:29 PM

5