DOWNLOAD Sony KV-HW212M83 Service Manual ↓ Size: 6.46 MB | Pages: 62 in PDF or view online for FREE

Model
KV-HW212M83
Pages
62
Size
6.46 MB
Type
PDF
Document
Service Manual
Brand
Device
TV
File
kv-hw212m83.pdf
Date

Sony KV-HW212M83 Service Manual ▷ View online

MODEL
COMMANDER   DEST.
CHASSIS NO.
KV-HW212M83
RM-W101 Pakistan
MODEL
COMMANDER DEST. CHASSIS NO.
CHASSIS
TRINITRON 
®
 
COLOR TV
SERVICE MANUAL
BX1S
RM
-W
101
– 2 –
KV-HW212M83
RM-W101
TABLE OF CONTENTS
SELF DIAGNOSTIC FUNCTION .............................. 3
1. DISASSEMBLY
1-1. 3D Speaker Removal ................................................ 6
1-2. Rear Cover Removal ................................................. 6
1-3. Speaker Removal ...................................................... 6
1-4. Chassis Assy Removal .............................................. 6
1-5. Service Position ........................................................ 6
1-6. Terminal Bracket Removal ....................................... 6
1-7. J Board Removal ....................................................... 7
1-8. A Board Removal ...................................................... 7
1-9. Picture Tube Removal ............................................... 7
2. SET-UP ADJUSTMENTS
2-1. Beam Landing ........................................................... 9
2-2. Convergence ............................................................ 10
2-3. Focus Adjustment .................................................... 12
2-4. G2 (SCREEN) Adjustment ..................................... 12
2-5 White Balance Adjustment ..................................... 12
2-6 Sub Bright Adjustment ........................................... 12
3. CIRCUIT ADJUSTMENTS
3-1. Adjustment With Commander ................................ 13
3-2. Adjustment Method ................................................ 14
3-3. Picture Quality Adjustments ................................... 31
3-4. Deflection Adjustment ............................................ 31
3-5. Picture Distortion Adjustment ................................ 33
Section
Title
Page
Section
Title
Page
4. DIAGRAMS
4-1. Block Diagram ........................................................ 34
4-2. Circuit Boards Location .......................................... 35
4-3. Schematic Diagram Information ............................ 35
4-3-1. C Board Schematic Diagram ..................... 36
4-3-2. A Board — Processor (Block 001) ............ 37
4-3-3. A Board — Audio (Block 002) .................. 39
4-3-4. A Board — Power Supply (Block 003) ..... 41
4-3-5. A Board — Deflection (Block 004) ........... 43
4-3-6. A Board — Tuner (Block 005) .................. 45
4-3-7. A Board — Jack (Block 006) ..................... 47
4-3-8. A Board — Heat Sink (Block 007) ............ 49
4-3-9. J Board Schematic Diagram ....................... 50
4-4. Voltage Measurement and Waveforms ................... 51
4-5. Printed Wiring Boards and Parts Location ............. 54
4-6. Semiconductors ....................................................... 57
5. EXPLODED VIEWS
5-1. Chassis ..................................................................... 59
5-2. 3D Box Assy ........................................................... 59
6. ELECTRICAL PARTS LIST .................................... 61
OPERATING INSTRUCTIONS
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY SHADING AND MARK 
! ON
THE SCHEMATIC DIAGRAMS, EXPLODED VIEWS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS
WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
CAUTION
SHORT CIRCUIT THE ANODE OF THE PICTURE TUBE AND
THE ANODE CAP TO THE METAL CHASSIS, CRT SHIELD,
OR CARBON PAINTED ON THE CRT, AFTER REMOVING THE
ANODE.
– 3 –
KV-HW212M83
RM-W101
The units in this manual contain a self diagnostic function. If an error occurs, the STANDBY (1) indicator will
automatically begin to flash. A description of the self-diagnosis function is explained in the instruction manual. The
number of times the STANDBY (1) indicator flashes translates to a probable source of the problem. If an error
symptom cannot be reproduced, the remote commander can be used to review the failure occurrence data stored in
memory to reveal past problems and how often these problems occur.
1. DIAGNOSTIC TEST  INDICATORS
When an errors occurs, the STANDBY (1) indicator will flash a set number of times to indicate the possible cause of
the problem. If there is more than one error, the indicator will identify the first of the problem areas.
Result for all of the following diagnosis items are displayed on screen. No error has occured if the screen displays a
"0".
*
If a +B overcurrent is detected, stoppage of the vertical deflection is detected simultaneously. The symptom that is
diagnosed first by the micro controller is displayed on the screen.
** Refer to Screen (G2) Adjustment in this manual.
SELF DIAGNOSTIC FUNCTION
Diagnosis
Item
Description
Power does
not turn on
+B overcurrent
(OCP)*
V-Protect
IK (AKB)
Power supply
NG (+5V) for
Video Processor
No. of timer
STANDBY (1)
indicator flashes
Does not light
2 times
4 times
5 times
8 times
Self-Diagnostic
display/
Diagnosis result
2:0
or
2:1 ~ 255
4:0
or
4:1 ~ 255
5:0
or
5:1 ~ 255
8:0
or
8:1 ~ 255
Probable Cause
Location
• Power cord is not plugged
in.
• Fuse is burned out (F600)
A board.
• H OUT (Q805) is shorted.
(A board)
• IC751 is shorted. (C board)
• +13V is not supplied.
(A board)
• IC804 is faulty. (A board)
• Video OUT (IC1545) is
faulty. (A board)
• IC001 is faulty. (A board)
• Screen (G2) is improperly
adjusted.**
• IC604 faulty.
• IC602 faulty.
Detected
Symptoms
• Power does not turn on.
• No power is supplied on
TV.
• AC Power supply is faulty.
• Power does not turn on.
• Load on power line is
shorted.
• Has entered standby state
after horizontal raster.
• Vertical deflection pulse is
stopped.
• Power line is shorted or
power supply is shorted.
• No raster is generated.
• CRT Cathode current
detection reference pulse
output is small.
• No power supply to CRT
ANODE.
• No RASTER is generated.
– 4 –
KV-HW212M83
RM-W101
STANDBY (1) indicator
2. DISPLAY OF 
STANDBY (1)
 INDICATOR
FLASH COUNT
3. STOPPING THE 
STANDBY (1)
 INDICATOR FLASH
Turn off the power switch on the TV main unit or unplug the power cord from the outlet to stop the STANDBY (1)
indicator from flashing.
4. SELF-DIAGNOSTIC SCREEN DISPLAY
For errors with symptoms such as "power sometimes shuts off" or "screen sometimes goes off" that cannot be confirmed,
it is possible to bring up past occurrences of failure on the screen for confirmation.
[To Bring Up Screen Test]
In standby mode, press buttons on the remote commander sequentially in rapid succession as shown below:
Display 
/ Channel 5 / Volume 
/ Power 
 / TV 
˘
Note that this differs from entering the service mode (volume [+]).
The following screen will be displayed indicating the error count.
Diagnostic Item
Flash Count*
+B overcurrent
2 times
V-Protect
4 times
IK (AKB)
5 times
Power Supply NG (+5V)
8 times
for Video processor
* One flash count is not used for self-diagnosis.
Lamp OFF 3 sec 
Lamp ON 300ms
Lamp OFF 300ms
2 : 
0
3 :
N/A
4 :
0
5 :
1
8 :
0
101 :
N/A
SELF DIAGNOSTIC
Numeral "0" means that no fault was detected.
Numeral "1" means the number of a fault occurrence (1 ~ 255).
Page of 62
Display

Sony KV-HW212M83 Service Manual ▷ Download

  • DOWNLOAD Sony KV-HW212M83 Service Manual ↓ Size: 6.46 MB | Pages: 62 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony KV-HW212M83 in PDF for free, which will help you to disassemble, recover, fix and repair Sony KV-HW212M83 TV. Information contained in Sony KV-HW212M83 Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.