Sony KV-HP21M53 Service Manual ▷ View online
– 25 –
KV-HP21M53
RM-W101
SPEED SEARCH (Time of speed search)
00 = disabled (original cycle speed)
01 = 4 time speed from the original
10 = 6 time speed from the original
11 = 8 time speed from the original
01 = 4 time speed from the original
10 = 6 time speed from the original
11 = 8 time speed from the original
TV System Selection
0 = disabled, 1 = enabled
Home Theatre
1 = Home Theatre mode available
Wide Screen
1 = Wide Screen model
Party Mode
(karaoke function)
0 = not available, 1 = available
PAM
Portable Audio Mode - GA
0 = not available, 1 = available
Component
(Component [YCbCr] Terminals)
0 = not available, 1 = available
Composite
(No. of Composite Terminals)
BX1S/BX1L Basic 00 = no composite terminal
BX1S/BX1L Basic 00 = no composite terminal
BX1L-Full : 00 = no composite terminal
01 = 1 composite terminal
01 = 2 composite terminals
10 = 2 composite terminals
10 = 3 composite terminals
11 = 3 composite terminals
11 = 4 composite terminals
SECAM
(SECAM Color System)
0 = disabled, 1 = enabled
Color decoding
(Color Crystal Selection)
00 = PAL/NTSC (Multi)
01 = NTSC (3.58MHz)
10 = PAL/NTSC (4.43MHz)
11 = PAL/NTSC (Tri-Norma)
01 = NTSC (3.58MHz)
10 = PAL/NTSC (4.43MHz)
11 = PAL/NTSC (Tri-Norma)
ITEM INFORMATION
No. OPB1
No. OPB1
No. OPB2
Item
Speed Search
Home
Wide
M
B/G
I
D/K
DEC
Theatre
Screen
KV-HP21M53
0
1
0
0
1
1
1
1
79
Item
Party
PAMC
Component
Composite (SCART)
SECAM
Color Decording
DEC
Mode
(GA)
KV-HP21M53
0
1
1
1
0
1
0
0
116
HDEV
(High Deviation Mode)
0 = disabled, 1 = enabled
NICAM ST
(NICAM Stereo)
0 = disabled, 1 = enabled
NICAM BI
(NICAM Bilingual)
0 = disabled, 1 = enabled
A2 ST/BI
(A2 [West German]
Stereo/Bilingual)
Stereo/Bilingual)
0 = disabled, 1 = enabled
Thai Bilingual
(A2 [Thai] Bilingual)
or Force SAP if US ST is active
or Force SAP if US ST is active
0 = disabled, 1 = enabled
US ST
(US Stereo)
0 = disabled, 1 = enabled
Korean ST
(Korean Stereo)
0 = disabled, 1 = enabled
MONO
(Monaural Model)
0 = Stereo (SSD) Model
1 = Monaural Model
1 = Monaural Model
Item
HDEV
NICAM
NICAM
A2 ST
Thai
US ST
JP/Korean
MONO
DEC
ST
BI
Bilingual
ST
KV-HP21M53
0
0
0
0
0
0
0
0
00
No. OPB3
– 26 –
KV-HP21M53
RM-W101
SMAT
Surround Matrix
0 = Active, 1 = Passive
1 spk Models
1 Speaker Models
0 = 2 or 3 Speaker Models,
1 = 1 speaker Models
1 = 1 speaker Models
VM
(Velocity Modulation)
0 = disabled, 1 = enabled
Equalizer
(5-band Equalizer Model)
0 = Bass/Treble Model, 1 = Equalizer Model
Surround
(Surround Selection)
00 = Off/Simulated/Surround
01 = Off/Simulated/SRS (3D) Surround
10 = Off/Simulated/WOW/TruSurround
11 = Off/Simulated/WOW/TruSurround/Virtual
01 = Off/Simulated/SRS (3D) Surround
10 = Off/Simulated/WOW/TruSurround
11 = Off/Simulated/WOW/TruSurround/Virtual
Bolby (not working now)
TOP
(Forced TOP)
0 = Auto Mode (TOP/FLOF), 1 = Forced TOP
TEXT
(Teletext Model)
0 = Non-Teletext Model, 1 = Teletext Model
Full Surround
(Full Surround option-no for
0 = Normal Surround Model
EURO model)
1 = Full Surround Model
(Off/simulated/surround/
SRS/WOW/TruSurround)
SRS/WOW/TruSurround)
No Surround
(No Surround Model)
0 = Surround Model, 1 = Non-Surround Model
Cosmic ASD
Automatic Standard Detection
0 = disabled, 1 = enabled
Using COSMIC (Non-Stereo)
ASD
(Automatic Standard Detection)
0 = disabled, 1 = enabled
Tilt
(Tilt Correction/PIC Rotation)
0 = disabled, 1 = enabled
IP Plus
(Intelligent Picture Plus)
0 = disabled, 1 = enabled
IP
(Intelligent Picture)
0 = disabled, 1 = enabled
Wide
(Wide Mode/V-Compressed)
0 = disabled, 1 = enabled
No. OPB5
No. OPB4
Item
SMAT
1spk
VM
Equalizer
Surround
Top
Text
DEC
KV-HP21M53
1
0
0
1
0
0
0
0
144
Item
Full
No
COSMIC
ASD
Tilt
IP Plus
IP
Wide
DEC
Surround
Surround
ASD
KV-HP21M53
0
0
0
0
0
1
1
1
07
GA US
(US Model Destination)
0 = US/CANADA/Latin
1 = Taiwan/Korea/Philippine
(Wake-up timer enable)
(GA Surround Spec:OFF,
SIMULATED, SRS)
1 = Taiwan/Korea/Philippine
(Wake-up timer enable)
(GA Surround Spec:OFF,
SIMULATED, SRS)
3D OSD
(BX1L Full version GA Multi
0 = Normal with 3D Intelligent picture OSD
Destination ONLY)
1 = Disable 3D Intelligent picture OSD
Feature 2
(Temporary for BX1L)
0 = Comb Not available
1 = Comb available
1 = Comb available
Feature 1
(Temporary for BX1L)
0 = PiP Not Available
1 = PiP available
1 = PiP available
OSD Language Selection
US (GA NTSC)
1x1x = Complicated Chinese
1xx1 = Korean (note: for BX1L, combination
1xx1 = Korean (note: for BX1L, combination
of C.Chinese & Korean not available)
1xxx = Simplified Chinese
GA
x1xx = Arabic
xx1x = Thai
xxx1 = Vietnamese
xx1x = Thai
xxx1 = Vietnamese
No. OPB6
Item
GA US
3D OSD
Feature 2
Feature 1
OSD Language Selection
DEC
KV-HP21M53
0
0
0
0
0
1
0
0
04
– 27 –
KV-HP21M53
RM-W101
3-3.
PICTURE QUALITY ADJUSTMENT
3-3-1. P MAX/CONTRAST ADJUSTMENT
1. Set TV to Video mode.
2. Set Picture mode to "CUSTOM".
3. Input PAL 100% CB to TV set (OTHERS), NTSC 75%
2. Set Picture mode to "CUSTOM".
3. Input PAL 100% CB to TV set (OTHERS), NTSC 75%
CB (NTSC model).
4. Set PICT 003 "PWL" to 00h WHBL 017 "BLBG" to 01h.
5. Set the following condition:
5. Set the following condition:
PICTURE 100%, COLOR 0%, BRIGHTNESS 50%
6. Connect an oscilloscope to pin 4 (R Output) of CN004.
7. Select SADJ 000 "PMAX" with 1 and 4 button of the
7. Select SADJ 000 "PMAX" with 1 and 4 button of the
commander then adjust VR with spec with 3 and 6
until reach the spec below:
until reach the spec below:
1.46 ± 0.03 Vp-p = For 21" without VM models/14" GA models
1.65 ± 0.03 Vp-p = With VM models except NTSC models
1.23 ± 0.03 Vp-p = NTSC models VM models
1.10 ± 0.03 Vp-p = For 21" NTSC non VM models/
14" GA NTSC models
8. Select Wide Mode to "ON" in TV and Video mode and
write "PMAX" data - 8 steps
(for models with V-Compression features only).
(for models with V-Compression features only).
9. Then press [MUTING]
t - to write the data.
10. Select "PWL" and "BLBG" back to initial data.
("PWL": 01h and "BLBG": 00h)
11. Then press [MUTING]
t - again to write the data.
3-3-2. SUB COLOR ADJUSTMENT
1. Set TV to Video mode.
2. Set Picture mode to "Custom".
3. Input PAL 100% Color Bar(CB) to TV set (OTHER
2. Set Picture mode to "Custom".
3. Input PAL 100% Color Bar(CB) to TV set (OTHER
MODEL).
4. INPUT NTSC 75% CB to TV set (NTSC MODEL).
5. Set PICT 006 "WTS" to 00h and Intelligent Picture to
5. Set PICT 006 "WTS" to 00h and Intelligent Picture to
"OFF".
6. Set the following condition:
PICTURE 50%, COLOR 50%, BRIGHTNESS 50%, HUE
50%, SHARPNESS 50%
50%, SHARPNESS 50%
7. Connect an oscilloscope to pin 2 (B Output) of CN004.
8. Select SADJ 004 "SCOL" with 1 and 4 button of the
8. Select SADJ 004 "SCOL" with 1 and 4 button of the
commander then adjust with 3 and 6 so that
V
V
B2
=V
B3
=V
B4
(for PAL), and V
B1
=V
B4
(for NTSC) then
write in the data +5 step offset.
9. Then press [MUTING]
t - to write the data.
10. Set "WTS" back to original data and Intelligent Picture to
"ON".
11. Copy no.9 data to PAL TV & DVD mode (OTHER
MODEL) and NTSC TV & DVD mode (NTSC MODEL)
VR
Black
VB2 = VB3 = VB4 (for PAL)
VB1 = VB4 (for NTSC)
(Difference is within 70mV)
VB1
VB2 VB3 VB4
VB1 VB2 VB3 VB4
3-3-3. SUB HUE ADJUSTMENT
1. Set TV to Video mode.
2. Set Picture mode to "CUSTOM".
3. Input NTSC 3.58 CB to TV set.
4. Set the following condition:
2. Set Picture mode to "CUSTOM".
3. Input NTSC 3.58 CB to TV set.
4. Set the following condition:
PICTURE 50%, COLOR 50%, BRIGHTNESS 50%,
HUE 50%, SHARPNESS 50%
HUE 50%, SHARPNESS 50%
5. Select service mode and - 5 step offset from SADJ 004
"SCOL" using 1 and 3 button of the remote
commander.
commander.
6. Connect oscilloscope to pin 2 (B output) of CN004.
7. Set to service mode and select SADJ 001 "SHUE" with
7. Set to service mode and select SADJ 001 "SHUE" with
1 and 4 button then adjust to V
B1
=V
B2
=V
B3
=V
B4
with
3 and 6 button.
8. Press [MUTING]
t - to write the data.
9. Select service mode SADJ 004 "SCOL" and +5 step
offset and write the data using [MUTING]
t -.
10. Select TV channel with 3.58 and repeat item (3) to (7)
and +1 step data offset.(NTSC model)
11. Press [MUTING]
t - to write the data.
12. For single system model with NTSC 4.43, select TV
channel with NTSC 4.43 and repeat item (3) to (8).
The highest level of V
B1
, V
B2
, V
B3
, V
B4
must be aligned at the same time.
The ideal difference between
V
B2
and V
B3
is within ± 80mV
13. Once adjustment is completed in Video mode, carry out
adjustment in DVD mode. Set TV to DVD mode. Input
NTSC 3.58 CB to DVD set and perform step 4 to 9 and
11.
NTSC 3.58 CB to DVD set and perform step 4 to 9 and
11.
3-4.
GEOMETRY ADJUSTMENT
Geometry adjustment must be done for both color systems
PAL and NTSC.
PAL and NTSC.
3-4-1. GENERAL SETTING
a) Input Monoscope or Special Color Bar(SPCB) signal
using a pattern generator.
b) Set to Service Mode.
c) Select Category/Functionally Name (as in the service
c) Select Category/Functionally Name (as in the service
list) using 1 and 4 button on the remote commander.
Eg. GEOM
Eg. GEOM
d) Raise or Lower the data value using 3 and 6 button.
e) Press [MUTING]
e) Press [MUTING]
t - to save the data into memory.
Note 1: Geometry Adjustment must be performed for 4 different
modes: PAL 50Hz NORMAL MODE, PAL 50Hz WIDE
MODE, NTSC 60Hz NORMAL MODE, NTSC 60Hz
WIDE MODE.
MODE, NTSC 60Hz NORMAL MODE, NTSC 60Hz
WIDE MODE.
VB1
VB2
VB3 VB4
80mV
– 28 –
KV-HP21M53
RM-W101
Item No.
Function
Illustration
GEOM 013
Vertical Shift
(VPOS)
GEOM 011
Vertical Amplitude
(VSIZ)
Note: Adjust VSIZ to
12.4
±
(SPCB)
11.3
±
(PAL Monoscope)
11.5
±
(NTSC Monoscope)
GEOM 000
Horizontal Shift
(HPOS)
GEOM 009
EW Trapezoid
(EWTZ)
GEOM 005
EW Width (EW)
(HSIZ)
Note: Adjust HSIZ to
16.4
±
(SPCB)
14.6
±
(PAL Monoscope)
15.3
±
(NTSC Monoscope)
GEOM 002
Horizontal Bow
(HBOW)
GEOM 006
EW Parabola/Width
(EWPW)
(PW)
GEOM 007
EW Upper Corner
(UCOP)
Parabola
GEOM 008
EW Lower Corner
(LCOP)
Parabola
GEOM 001
Horizontal
(HPAR)
Parallelogram
GEOM 012
S-Correction(SC)
(SCOR)
GEOM 003
Vertical Linearity
(VLIN)
GEOM 004
Vertical Scroll
(VSCR)
3-4-2. PAL 50Hz NORMAL MODE
a) Input PAL signal 50Hz in the Service Mode.
b) Set Wide Mode to "OFF".
c) Perform the below adjustments using the "GENERAL
b) Set Wide Mode to "OFF".
c) Perform the below adjustments using the "GENERAL
SETTING" sequence (Refer 3-4-1)
d) Once adjustment is done for PAL 50Hz NORMAL
MODE,set Wide mode to "ON", and copy all PAL 50Hz
NORMAL MODE adjusted data to PAL 50Hz WIDE
MODE except VSCR.
NORMAL MODE adjusted data to PAL 50Hz WIDE
MODE except VSCR.
e) Now, perform adjustment for NTSC 60Hz NORMAL
MODE.
f)
Set Wide mode to "OFF".
g) Perform adjustment items listed in the above table using
the "GENERAL SETTING sequence (refer 3-4-1).
h) Once adjustment is completed,set Wide mode to "ON"
and copy all NTSC 60Hz NORMAL MODE adjusted data
to NTSC 60Hz WIDE MODE except VSCR.
to NTSC 60Hz WIDE MODE except VSCR.
i)
Upon completing adjustment for all modes,reconfirm
VSIZ and VPOS.
VSIZ and VPOS.
Click on the first or last page to see other KV-HP21M53 service manuals if exist.