Sony KV-G21MW3 Service Manual ▷ View online
–
5
–
–
KV
-G21MW3/G21QW3
-G21MW3/G21QW3
RM-869
3
1
– PROGR +
SELECT
– PROGR +
– VOLUME +
TV/VIDEO
SELECT
VHF LOW B/G
1
SECTION 1
GENERAL
The operating instructions mentioned here are partial abstracts
from the Operating Instruction Manual. The page numbers of
the Operating Instruction Manual remain as in the manual.
from the Operating Instruction Manual. The page numbers of
the Operating Instruction Manual remain as in the manual.
2
–
6
–
–
KV
-G21MW3/G21QW3
-G21MW3/G21QW3
RM-869
Getting Started
4
-EN
Connecting a VHF antenna or a combination VHF/UHF antenna
— 75-ohm coaxial cable (round)
— 75-ohm coaxial cable (round)
Attach an optional IEC antenna connector to the 75-ohm coaxial cable.
Plug the connector into the
(antenna) socket at the rear of the TV.
Connections
On a wall
or
Getting Started
Rear of TV
Rear of TV
5
Getting Started
-EN
Connecting optional equipment
You can connect optional audio/video equipment to your TV such as a VCR, multi disc player, camcorder, or video
game.
game.
Connecting video equipment using the
…
(video input) jack
EN
When connecting video equipment to the
…
(video input) jack
Do not connect video equipment to the
…
(video input) jacks at the front and the rear of your TV simultaneously; otherwise the picture
will not be displayed properly on the screen.
Connecting audio/video equipment using the
Ú
(monitor output) jack
Rear of TV
to antenna socket
VCR
to antenna
output
output
≥
Ú
…
D
to video
and audio
inputs
and audio
inputs
: Signal flow
Rear of TV
to antenna
output
output
to video
and audio
outputs
and audio
outputs
VCR
to antenna socket
≥
Ú
…
D
: Signal flow
Front of TV
Camcorder
D
…
≥
to video and
audio outputs
audio outputs
: Signal flow
to
…
(video input)
D
(video) and
≥
(audio) inputs
to
Ú
(monitor output)
D
(video) and
≥
(audio) outputs
to
…
(video input)
D
(video) and
≥
(audio) inputs
When recording through the
Ú
(monitor output) jack
Do not change the channel or video input while recording with a VCR; otherwise the channel or video input you are recording also will be
changed.
changed.
–
7
–
–
KV
-G21MW3/G21QW3
-G21MW3/G21QW3
RM-869
7
Getting Started
-EN
5
Press +/– on the remote commander or
.
+/– on the TV again.
To start presetting channels automatically
from the specified program position
Press PROGR +/– or number buttons on the remote
commander or PROGR +/– on the TV until the
required program position appears on the screen after
step 4 of “Presetting channels automatically”.
from the specified program position
Press PROGR +/– or number buttons on the remote
commander or PROGR +/– on the TV until the
required program position appears on the screen after
step 4 of “Presetting channels automatically”.
Presetting channels manually
1
Press SELECT on the remote commander or the
TV until “TV SYSTEM” appears on the screen
(for KV-G21MW3 only).
TV until “TV SYSTEM” appears on the screen
(for KV-G21MW3 only).
2
Press +/– on the remote commander or
.
+/– on the TV to select the TV system (for
KV-G21MW3 only).
3
Press SELECT on the remote commander or
the TV until “MANUAL PROGRAM” appears
on the screen.
the TV until “MANUAL PROGRAM” appears
on the screen.
4
Press +/– on the remote commander or
.
+/– on the TV.
5
Press PROGR +/– or number buttons on the
remote commander or PROGR +/– on the TV
until the required program position
appears on the screen.
remote commander or PROGR +/– on the TV
until the required program position
appears on the screen.
6
Press +/– on the remote commander or
.
+/– on the TV until the required channel
picture appears on the screen.
7
Press SELECT on the remote commander or
the TV.
the TV.
Disabling program positions
1
Press PROGR +/– or number buttons on the
remote commander or PROGR +/– on the TV
until the unused or unwanted program
position appears on the screen.
remote commander or PROGR +/– on the TV
until the unused or unwanted program
position appears on the screen.
2
Press SELECT on the remote commander or
the TV until “MANUAL PROGRAM” appears
on the screen.
the TV until “MANUAL PROGRAM” appears
on the screen.
3
Press +/– on the remote commander or
.
+/– on the TV.
4
Press PIC MODE on the remote commander.
5
Press SELECT on the remote commander or
the TV.
the TV.
To preset the disabled program position again
Preset the channel quickly, automatically or manually.
Preset the channel quickly, automatically or manually.
TV SYSTEM
SELECT
SELECT
or
or
B/G
I
D/K
M
–
.
+
MANUAL PROGRAM
SELECT
SELECT
or
1
2
3
4
6
7
8
9
÷
0
5
PROGR
– PROGR +
or
or
VHF LOW B/G
–
.
+
1
SELECT
SELECT
or
1
2
3
1
–
.
+
1
2
3
4
6
7
8
9
÷
0
5
PROGR
– PROGR +
or
or
or
or
–
.
+
or
Getting Started
6
-EN
Presetting channels
If the picture color is poor and/or the sound is
noisy (for KV-G21MW3 only)
Select the appropriate TV system as follows:
noisy (for KV-G21MW3 only)
Select the appropriate TV system as follows:
1
Press SELECT on the remote commander or the TV
until “TV SYSTEM” appears.
until “TV SYSTEM” appears.
2
Press +/– on the remote commander or
.
+/– on
the TV until the picture and sound becomes
normal.
normal.
Notes
•
If you do not know your local TV system, consult your nearest
authorized service center or dealer.
authorized service center or dealer.
•
The setting of the “TV SYSTEM” is memorized for each
program position.
program position.
Presetting channels automatically
1
Press SELECT on the remote commander or
the TV until “TV SYSTEM” appears on the
screen (for KV-G21MW3 only).
the TV until “TV SYSTEM” appears on the
screen (for KV-G21MW3 only).
2
Press +/– on the remote commander or
.
+/– on the TV to select the TV system
(for KV-G21MW3 only).
3
Press SELECT on the remote commander or
the TV until “AUTO PROGRAM” appears on
the screen.
the TV until “AUTO PROGRAM” appears on
the screen.
4
Press +/– on the remote commander or
.
+/– on the TV.
You can preset up to 100 TV channels in numerical
sequence from program position 1 using the buttons on
the remote commander or the TV.
sequence from program position 1 using the buttons on
the remote commander or the TV.
You can preset TV channels quickly, automatically or
manually.
manually.
Quick channel presetting
1
Press
U
to turn on the TV.
When the TV is turned on in standby mode, press
u
on the remote commander.
2
Press SELECT and PROGR + on the TV
simultaneously for one to two seconds.
simultaneously for one to two seconds.
Remote commander
TV SYSTEM
SELECT
SELECT
or
1
2
3
1
– PROGR +
SELECT
U
TV
–
PROGR
+
–
.
+
TV/VIDEO
SELECT
R
U
u
Number
PROGR +/–
+/–
SELECT
or
or
or
AUTO PROGRAM
SELECT
SELECT
B/G
I
D/K
M
–
.
+
VHF LOW B/G
1
–
.
+
Front of TV
–
8
–
–
KV
-G21MW3/G21QW3
-G21MW3/G21QW3
RM-869
Operations
8
-EN
Watching the TV
Turning off the TV
To turn off the TV temporarily
Press
Press
u
on the remote commander. The
u
indicator
on the TV lights up.
To turn off the TV completely
Press
Press
U
on the TV.
If the power on the TV is turned off in standby mode, the
u
indicator on the TV may remain alight for a while.
Watching the video input
Press
…
F
.
To watch TV
Press
Press
;
.
Muting the sound
Press
¤
.
1
Press
U
to turn on the TV.
When the TV is turned on in standby mode, press
u
on the remote commander.
2
Select the TV program you want to watch.
To select a program position directly
Press the number button.
To select a two-digit program position, press
“-/--” before the number buttons.
For example: to select program position 25, press
“-/--”, and then “2” and “5”.
“-/--” before the number buttons.
For example: to select program position 25, press
“-/--”, and then “2” and “5”.
To scan through program positions
Press PROGR +/– until the program position you
want appears.
want appears.
3
Press
.
+/– to adjust the volume.
1
2
3
4
6
7
8
9
÷
0
5
÷
2
5
PROGR
Operations
U
.
u
¤
MUTING
U
…
F
VIDEO
1
;
9
Operations
-EN
1
AUTO B/G
DYNAMIC
-EN
•
If no buttons or controls are pressed for more than two hours
after the TV is turned on using the Wake Up Timer, the TV
automatically turns into standby mode. If you want to
continue watching the TV, press any button or control on the
TV or remote commander.
after the TV is turned on using the Wake Up Timer, the TV
automatically turns into standby mode. If you want to
continue watching the TV, press any button or control on the
TV or remote commander.
After 30 minutes
After 60 minutes
After 90 minutes
No sleep timer
SLEEP TIMER:30M
SLEEP TIMER:60M
SLEEP TIMER:OFF
SLEEP TIMER:90M
C
I
Displaying on-screen information
Press
E
G
.
The program position, local system, and TV settings are
displayed on the screen.
displayed on the screen.
E G
Setting the Sleep Timer
You can set the TV automatically turned off as you
program.
program.
Press
C
I
.
To cancel the Sleep Timer, press
C
I
repeatedly
until “SLEEP TIMER: OFF” appears, or turn off the TV.
Changing the on-screen display
language
language
You can use buttons on the remote commander or the
TV to change the on-screen display language.
TV to change the on-screen display language.
1
Press SELECT until the screen appears as
follows:
follows:
2
Press +/– to select “
”.
Note
•
You can also use SELECT and
.
+/– on the TV to select the
on-screen display language.
Setting the Wake Up Timer
You can set the TV automatically turned on as you
program.
program.
1
Press
B
©
repeatedly to set the timer.
The on-screen display appears and the
B
indicator
on the TV lights up.
2
If you want a particular TV program or video
input to be displayed using the Wake Up Timer,
select the TV program or video input.
input to be displayed using the Wake Up Timer,
select the TV program or video input.
3
Press
u
on the remote commander or set
the Sleep Timer to turn off the TV in
standby mode.
standby mode.
To cancel the Wake Up Timer, press
B
©
repeatedly
until “WAKE UP TIMER: OFF” appears, or turn off the
main power of the TV.
main power of the TV.
Notes
•
The Wake Up Timer starts immediately after the on-screen
display disappears.
display disappears.
•
The last TV program position or video input just before the TV
turns into standby mode will appear when the TV is turned on
using the Wake Up Timer.
turns into standby mode will appear when the TV is turned on
using the Wake Up Timer.
After 10 minutes
No wake up timer
After 12 hours
WAKE UP TIMER:10M
WAKE UP TIMER:OFF
WAKE UP TIMER:12H00M
B
©
+/–
SELECT
LANGUAGE / : ENGLISH
SELECT
: LANGUAGE /
Click on the first or last page to see other KV-G21MW3 service manuals if exist.