Sony KV-DX29K90B Service Manual ▷ View online
– 9 –
KV-DX29K9H/KV-DX29K9H/B/DX29K90B/DX29K90L
RM-1006
RM-1006
RM-1006
RM-1006
2-3. CHASSIS ASSEMBLY
1) Remove two claws on both sides of the chassis assembly
by pulling up.
Enlarged view (left side)
Enlarged view (right side)
2) Pull out the chassis assembly backward.
– 10 –
KV-DX29K9H/KV-DX29K9H/B/DX29K90B/DX29K90L
RM-1006
RM-1006
RM-1006
RM-1006
2-4. ASSEMBLING CHASSIS ASSEMBLY
1) Hold the both sides of the chassis assembly.
2) Push forward until the claws on both sides of the chassis
assembly fit into the beznet assembly.
Enlarged view (left side)
Enlarged view (right side)
– 11 –
KV-DX29K9H/KV-DX29K9H/B/DX29K90B/DX29K90L
RM-1006
RM-1006
RM-1006
RM-1006
2-5. SERVICE POSITION
1) Hold the chassis assembly in the rear.
2) Turn it clockwise 90 degrees and stand it.
2) Turn it clockwise 90 degrees and stand it.
3) Settle it by inserting the chassis assembly holder under
the U bracket.
2-6. U BRACKET
1) Remove three screws secured the U bracket.
2) Pull out the power cord and while pulling up the claw
secured the U bracket,
3) Remove the U bracket.
– 12 –
KV-DX29K9H/KV-DX29K9H/B/DX29K90B/DX29K90L
RM-1006
RM-1006
RM-1006
RM-1006
2-7. F4 BOARD
1) Remove three screws secured the F1 bracket.
2) Remove F4 board with the F1 bracket.
2-8. U3 BOARD
1) While pulling two claws on the B-to-B connector,
2) Remove U3 board from B1 board.
2) Remove U3 board from B1 board.
2-9. B1 BOARD
1) Remove connector CN3003 on B1 board.
2) Remove B1 board while putting off three claws on two B-
to-B connectors.
Click on the first or last page to see other KV-DX29K90B service manuals if exist.