DOWNLOAD Sony KV-DR34M97 Service Manual ↓ Size: 17.82 MB | Pages: 127 in PDF or view online for FREE

4

Screw the band to the TV stand and to the
provided hole at the rear of your TV.

(1) Put a cord or chain through the clamps.
(2) Screw one clamp to a wall or pillar and

the other clamp to the provided hole at
the rear of your TV.

(1) Attach each end of a cord or chain to

the provided holders at the rear of
your TV.

(2) Securely fix the attached cord or chain

to a wall or pillar using an attachment
which can support the TV set weight.

Note
• Use only the supplied screws.  Use of other screws may damage the TV.

x

To prevent the TV from falling, use the supplied  screws, clamps and band to
secure the TV.

5

Getting Started ..................................... 6
Setting up your TV
(“INITIAL SETUP”) ............................. 7

TV front and rear panels ..................... 8
Remote control ..................................... 9

Selecting the picture and sound
modes .................................................. 11
Viewing higher quality pictures
with DRC-MF ..................................... 12
Viewing the picture in wide mode .. 12
Watching Picture-in-Picture (PIP)
(KV-DR34M97 only) .......................... 13
Selecting a TV program using PIP
(KV-DR34M97 only) .......................... 14
Listening with surround sound ....... 14
Setting the timers ............................... 15
Enjoying stereo or bilingual
programs ............................................. 16

Introducing the menu system .......... 17
Changing the “PICTURE” setting ... 20
Changing the “SOUND” setting ..... 22
Changing the Picture-in-Picture
(“PIP”) setting (KV-DR34M97 only) ... 24
Changing the “SETUP” setting ........ 25
Changing the Channel Preset
(“CH PRESET”) setting ..................... 27

Connecting optional components ... 30
Troubleshooting ................................. 32
Specifications ...................... Back cover

6

Installation

x

UP

I N I T I A L S E T

ENG I

L SH

L AN U

G AGE :

b

b

Insert the batteries (supplied) into the remote.

Note
• Do not use old or different types of batteries together.

Connect the antenna cable (not supplied) to 8
(antenna input) at the rear of the TV.

Tip
• You can also connect your TV to other optional components

(see page 30).

Set up the TV by following the instructions of the
“INITIAL SETUP”menu (see page 7).

Plug in the power cord, then press ! on the TV to
turn it on.

7

Installation

x

When you turn on your TV for the first time,
the “INITIAL SETUP” menu will appear.
This menu allows you to change the menu
language, adjust the picture position and
preset the TV channels automatically.

Press V or v to select the desired menu
language (e.g.,”ENGLISH”), then press
ENTER.

The selected menu language appears.

Press V or v (or B/b), then press ENTER
to adjust the picture position if it is not
aligned to the TV screen.

The

or 

 icon on the screen flashes

while adjusting.

Press V or v to  select “YES”, then press
ENTER to preset the channels
automatically (see page 27).

The screen will indicate automatic presetting
is in progress.

To skip automatic channel presetting, select
“NO”, then press ENTER.

Press V or v to  select “NO”, then press
ENTER. The “INITIAL SETUP” menu will
not appear again the next time you turn
on the TV by pressing !.

To allow this menu to appear again, select
“YES”, then press ENTER.

Tip
• You can immediately go to the end of the ”INITIAL SETUP” menu by pressing MENU.
• You can also set up your TV using the menu system (see page 17).

UP

I N I T I A L S E T

ENG I

L SH

L AN U

G AGE :

UP

I N I T I A L S E T

P I C

ROT A T I ON

UP

I N I T I A L S E T

ES

 

S T A R T
N O W ?

      A U T O     P R O G R A M

Y

NO

UP

I N I T I A L S E T

H I S

D I S

 

P A

L

NE X

T

T I M

E ?

Y   T

ENU

M

Y

NO

ES

UP

I N I T I A L S E T

Y S :

PR :

 

0 9

T V

AU TO

S

H F  

L OW

V

V

/v/B/b/