Sony KV-DR29M97 Service Manual ▷ View online
33
Additional Information
Possible cause
Symptom
Solutions
Page
No picture
No sound
Good picture
No sound
Dotted lines or
stripes
stripes
Double images or
“ghosts”
“ghosts”
No color
• The power cord,
antenna or VCR is not
connected.
connected.
• The TV is not turned
on.
• The volume level is too
low.
• The sound is muted.
• PIP sound is selected
when PIP is displayed
(KV-DR34M97 only).
(KV-DR34M97 only).
• There is local
interference from cars,
neon signs, hair dryers,
power generators, etc.
neon signs, hair dryers,
power generators, etc.
• Broadcast signals are
reflected by nearby
mountains or
buildings.
mountains or
buildings.
• The antenna setup is
inappropriate.
• Use of a booster is
inappropriate.
• The color level setting
is too low.
• The color system
setting is
inappropriate.
inappropriate.
• The antenna setup is
inappropriate.
• Check the power cord, antenna and VCR
connections.
• Press
?/1
(power).
• Press ! (main power) on the TV to turn
off the TV for about five seconds, then
turn it on again.
turn it on again.
• Press 2 + to increase the volume level.
• Press % to cancel the muting.
• Press SOUND or
.
• Do not use a hair dryer or other
equipment near the TV.
• Check the antenna setup. Contact a Sony
dealer for advice.
• Use a highly directional antenna.
• Use the fine tuning (“FINE”) function.
• Check the antenna setup. Contact a Sony
dealer for advice.
• Turn off or disconnect the booster if it is in
use.
• Display the “PICTURE” menu and select
“ADJUST” of “PICTURE MODE”, then
adjust the “COLOR” level.
adjust the “COLOR” level.
• Display the “SETUP” menu and check the
color system (“COLOR SYS”) setting
(usually set this to “AUTO”).
(usually set this to “AUTO”).
• Check the antenna setup. Contact a Sony
dealer for advice.
30
9
8
8
9
13
–
–
–
29
–
–
21
25
–
continue
34
Additional Information
continued
Possible cause
Symptom
Solutions
Good m
orning!
Page
Picture slant
Abnormal color
patches
TV cannot receive
stereo broadcast
sound.
or
Stereo broadcast
sound switches
on and off or
is distorted.
The 1 (standby)
indicator on your
TV flashes red
several times after
every three
seconds.
Cannot play
shooting games.
–
25
–
16
30
–
–
–
• The magnetic
disturbance from
external speakers or
other equipment, or
the direction of the
earth’s magnetic field
may affect the TV.
external speakers or
other equipment, or
the direction of the
earth’s magnetic field
may affect the TV.
• The magnetic
disturbance from
external speakers or
other equipment, or the
direction of the earth’s
magnetic field may
affect the TV.
external speakers or
other equipment, or the
direction of the earth’s
magnetic field may
affect the TV.
• The stereo reception
setting is inappropriate.
• The connection is loose
or the cable is damaged.
• The antenna setup is
inappropriate.
• Your TV’s self-diagnosis
function indicates the
possible problems.
possible problems.
• Some shooting games
which involve pointing
a light beam at the TV
screen with an
electronic gun or rifle
cannot be used with
your TV. For details, see
the instruction manual
supplied with the video
game software.
a light beam at the TV
screen with an
electronic gun or rifle
cannot be used with
your TV. For details, see
the instruction manual
supplied with the video
game software.
• Keep external speakers or other electrical
equipment away from the TV.
• Display the “SETUP” menu and adjust
“PIC ROTATION” so that the picture
position is optimal.
position is optimal.
• Keep external speakers or other
equipment away from the TV. Do not
move the TV while the TV is turned on.
Press ! (main power) on the TV to turn
off the TV for about 15 minutes, then turn
it on again to demagnetize the TV.
move the TV while the TV is turned on.
Press ! (main power) on the TV to turn
off the TV for about 15 minutes, then turn
it on again to demagnetize the TV.
• Press A/B until “AUTO” appears on the
screen.
• Check the antenna cable and connection
on the TV, VCR and on the wall.
• Check the antenna setup. Contact a Sony
dealer for advice.
• Count the number of times the 1
(standby) indicator flashes. Press !
(main power) to turn off your TV.
Contact your nearest Sony service center.
(main power) to turn off your TV.
Contact your nearest Sony service center.
—
35
Additional Information
–
–
TV cabinet creaks.
A small “boom”
sound is heard
when the TV is
turned on.
Possible cause
Symptom
Solutions
Page
• Changes in room
temperature sometimes
make the TV cabinet
expand or contract,
causing a noise. This
does not indicate a
malfunction.
make the TV cabinet
expand or contract,
causing a noise. This
does not indicate a
malfunction.
• The TV’s
demagnetizing function
is working.
This does not indicate a
malfunction.
is working.
This does not indicate a
malfunction.
—
—
36
Additional Information
Power requirements
Power consumption (W)
Television system
Color system
Stereo/Bilingual system
Channel coverage
B/G
I
D/K
M
8
(Antenna)
Audio output (Speaker)
3D WOOFER
Number of terminal
(Video)
(Audio)
(S Video)
(Component
Video)
i
(Headphone)
Picture tube
Tube size (cm)
Screen size (cm)
Dimensions (w/h/d, mm)
Mass (kg)
x
Specifications
Design and specifications are subject to change without notice.
Note
KV-DR34M97
KV-DR29M93
220-240 V AC, 50/60 Hz
Indicated on the rear of the TV
B/G, I, D/K, M
PAL, PAL 60, SECAM, NTSC3.58, NTSC4.43
NICAM Stereo/Bilingual B/G, I;
A2 Stereo/Bilingual B/G
A2 Stereo/Bilingual B/G
VHF : E2 to E12
UHF : E21 to E69
CATV : S01 to S03, S1 to S41
UHF : E21 to E69
CATV : S01 to S03, S1 to S41
UHF : B21 to B68
CATV : S01 to S03, S1 to S41
CATV : S01 to S03, S1 to S41
VHF : C1 to C12, R1 to R12
UHF : C13 to C57, R21 to R60
CATV : S01 to S03, S1 to S41, Z1 to Z39
UHF : C13 to C57, R21 to R60
CATV : S01 to S03, S1 to S41, Z1 to Z39
VHF : A2 to A13
UHF : A14 to A79
CATV : A-8 to A-2, A to W+4, W+6 to W+84
UHF : A14 to A79
CATV : A-8 to A-2, A to W+4, W+6 to W+84
75-ohm external terminal
6W + 6W
15W
Input: 4
Output: 1
Phono jacks; 1 Vp-p, 75 ohms
Input: 4
Output: 1
Phono jacks; 500 mVrms
Input: 2
Y: 1 Vp-p, 75 ohms,
unbalanced, sync negative
C: 0.286 Vp-p, 75 ohms
unbalanced, sync negative
C: 0.286 Vp-p, 75 ohms
Input: 1
Phono jacks;
Y: 1 Vp-p, 75 ohms,
sync negative
P
Y: 1 Vp-p, 75 ohms,
sync negative
P
B
/C
B
: 0.7 Vp-p, 75 ohms
P
R
/C
R
0.7 Vp-p, 75 ohms
Audio: 500 mVrms
Output: 1
Stereo minijack
34 in.
29 in.
86
72
Measured diagonally
80
68
Measured diagonally
894
× 690 × 569
786
× 596 × 514
85
57
Sony Corporation