DOWNLOAD Sony KV-DA29M31 Service Manual ↓ Size: 16.93 MB | Pages: 127 in PDF or view online for FREE

Model
KV-DA29M31
Pages
127
Size
16.93 MB
Type
PDF
Document
Service Manual
Brand
Device
TV
File
kv-da29m31.pdf
Date

Sony KV-DA29M31 Service Manual ▷ View online

MODEL
COMMANDER DEST. CHASSIS NO.
CHASSIS
TRINITRON 
®
 
COLOR TV
SERVICE MANUAL
CX1
MODEL
COMMANDER   DEST.
CHASSIS NO.
KV-DA29M31
RM-W105 Oceania
SCC-V30B-A
KV-DA29M86
RM-W105 Middle East SCC-V24D-A
RM-W105
– 2 –
KV-DA29M31/M86
RM-W105
TABLE OF CONTENTS
SELF DIAGNOSTIC FUNCTION .............................. 3
1. DISASSEMBLY
1-1. Rear Cover Removal ................................................. 6
1-2. Speaker Removal ...................................................... 6
1-3. Chassis Assy Removal .............................................. 6
1-4. Service Position ........................................................ 6
1-5. Terminal Bracket Removal ....................................... 6
1-6. J Board Removal ....................................................... 6
1-7. BP and BC Boards Removal ..................................... 7
1-8. BH1 Board Removal ................................................. 7
1-9. F1 Board Removal .................................................... 7
1-10. DL Board Removal ................................................... 7
1-11. H1 and H2 Boards Removal ..................................... 7
1-12. A and D Boards Removal ......................................... 7
1-13. Picture Tube Removal ............................................... 8
2. SERVICE JIG
2-1. Jigs Required for Servicing ...................................... 9
3. CIRCUIT BOARDS LOCATION ............................... 9
4. ADVANCE OPERATION
4-1. "RESET" Function .................................................. 10
5. SET-UP ADJUSTMENTS
5-1. Beam Landing ......................................................... 11
5-2. Convergence Adjustment ........................................ 12
5-3. Focus Adjustment .................................................... 14
5-4. Neck Assy Twist Adjustment .................................. 14
5-5. G2 (SCREEN) and White Balance Adjustment ..... 14
6. CIRCUIT ADJUSTMENTS
6-1. Adjustment With Commander ................................ 15
6-2. Adjustment Method ................................................ 16
6-3. Picture Quality Adjustments ................................... 61
6-4. Sub Hue/Col Adjustment ........................................ 61
6-5. Deflection Adjustments .......................................... 61
6-6. A Board Adjustment After IC003 (MEMORY)
Replacement ............................................................ 62
6-7. Picture Distortion Adjustment ................................ 63
Section
Title
Page
Section
Title
Page
7. DIAGRAMS
7-1. Block Diagram ........................................................ 64
7-2. Schematic Diagram Information ............................ 65
7-2-1. A Board – (Block 001) ................................. 66
7-2-2. A Board – (Block 002) ................................. 68
7-2-3. A Board – (Block 003) ................................. 70
7-2-4. A Board – (Block 004) ................................. 72
7-2-5. BC Board Schematic Diagram .................... 73
7-2-6. BH1 Board – (Block 001) ............................ 75
7-2-7. BH1 Board – (Block 002) ............................ 77
7-2-8. BP Board Schematic Diagrams ................... 79
7-2-9. C Board Schematic Diagram ....................... 81
7-2-10. D Board – (Block 001) .............................. 83
7-2-11. D Board – (Block 002) .............................. 85
7-2-12. DL Board Schematic Diagram .................. 86
7-2-13. F1 and H2 Boards Schematic Diagrams .... 88
7-2-14. H1 Board Schematic Diagram ................... 89
7-2-15. VM Board – (Block 001) ........................... 91
7-2-16. VM Board – (Block 002) ........................... 93
7-2-17. J Board Schematic Diagram ...................... 94
7-3. Voltage Measurement and Waveform ..................... 95
7-4. Printed Wiring Boards .......................................... 106
7-5. Semiconductors ..................................................... 117
8. EXPLODED VIEWS
8-1. Picture Tube .......................................................... 119
8-2. Chassis ................................................................... 120
9. ELECTRICAL PARTS LIST .................................. 121
OPERATING INSTRUCTIONS
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY SHADING AND MARK 
! ON
THE SCHEMATIC DIAGRAMS, EXPLODED VIEWS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS
WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
CAUTION
SHORT CIRCUIT THE ANODE OF THE PICTURE TUBE AND
THE ANODE CAP TO THE METAL CHASSIS, CRT SHIELD,
OR CARBON PAINTED ON THE CRT, AFTER REMOVING THE
ANODE.
– 3 –
KV-DA29M31/M86
RM-W105
The units in this manual contain a self-diagnostic function. If an error occurs, the STANDBY/TIMER lamp will
automatically begin to flash.
The number of times the lamp flashes translates to a probable source of the problem. If an error symptom cannot be
reproduced, the remote commander can be used to review the failure occurrence data stored in memory to reveal past
problems and how often these problems occur.
1. DIAGNOSTIC TEST INDICATORS
When an error occurs, the STANDBY/TIMER lamp will flash a number of times to indicate the possible cause of the
problem. If there is more than one error, the lamp will identify the first of the problem areas.
Result for all of the following diagnostic items are displayed on screen. No error has occured if the screen displays a
“0”.
Diagnostic
Item
Description
• Power does not
turn on
• +B overcurrent
(OCP)
• Horizontal
deflection failure
• +B overvoltage
(OVP)
• Vertical deflection
failure
• White balance
failure (no
PICTURE)
• 5V/9V failure
• Micro reset
No. of times
STANDBY/TIMER
lamp flashes
Does not light
2 times
3 times
4 times
5 times
8 times
Self-diagnostic
display/Diagnostic
result
002:000 or
002:001~255
003:000 or
003:001~255
004:000 or
004:001~255
005:000 or
005:001~255
008:000 or
008:001~225
101:00 or
101:001~225
Probable
Cause
Location
• Power cord is not plugged
in.
• Fuse is burned out F1601
(F1 Board)
• H.OUT Q6802 is shorted.
• C6831 is open circuit.
PS6606 open, PS6605
open. (D board)
• PH6602 faulty.
D6644 faulty, R6651 open.
• 10.5V is not supplied.
(D board)
• V.OUT IC6800 faulty
D6816 faulty
D6817 faulty
D6824 faulty
R6852 open
R6851 open (D board)
• G2 is improperly adjusted.
• CRT problem.
• Video OUT IC9001, 9002,
9003 are faulty. (C board)
• IC4301 CXA2170Q (A
board) are faulty.
• 5V regulator (IC2601) faulty.
• 9V regulator (IC2600) faulty.
• CRT Discharge (C Board)
• Static discharge
• External noise
Detected
Symptoms
• Power does not turn on.
• No power is supplied to the
TV.
• AC power supply is faulty.
• Power does not turn on.
• Load on power line is
shorted.
• H pulse output is too high.
• Power does not come on.
• Vertical deflection pulse is
stopped.
• Vertical size is too small.
• Vertical deflection stopped.
• No raster is generated.
• CRT cathode current
detection reference pulse
output is small.
• TV Blank
• No Raster
• Power is shut down shortly,
after this return back to
normal.
• Detect Micro latch up.
SELF DIAGNOSTIC FUNCTION
– 4 –
KV-DA29M31/M86
RM-W105
STANDBY (1) indicator
2. DISPLAY OF STANDBY/TIMER LIGHT FLASH COUNT
3. STOPPING THE STANDBY/TIMER FLASH
Turn off the power switch on the TV main unit or unplug the power cord from the outlet to stop the STANDBY/TIMER lamp
from flashing.
4. SELF-DIAGNOSTIC SCREEN DISPLAY
For errors with symptoms such as "power sometimes shuts off" or "screen sometimes goes off" that cannot be confirmed,
it is possible to bring up past occurances of failure for confirmation on the screen:
[To Bring Up Screen Test]
In standby mode, press buttons on the remote commander sequentially in rapid succession as shown below:
[Screen display] / channel 
5
 
/ Sound volume [-] / Power ON
˘
Note that this differs from entering the service mode (mode volume [+]).
Self-Diagnosis screen display
Diagnostic Item
Flash Count*
+B overcurrent and
2 times
Horizontal Deflection Failure
+B overvoltage
3 times
V deflection stop
4 times
White balance failure
5 times
5V/9V failure
8 times
* One flash count is not used for self-diagnostic.
Lamp ON 0.3 sec.
Lamp OFF 3 sec.
Lamp OFF 0.3 sec.
2 times
3 times
4 times
5 times
8 times
002 : 000
003 : 000
004 : 000
005 : 001
Numeral "0" means that no fault has been detected.
Numeral "1" means a fault has been detected.
008 : 002
101 : 000
SELF DIAGNOSTIC
Numeral "2" means two faults have been detected.
Page of 127
Display

Sony KV-DA29M31 Service Manual ▷ Download

  • DOWNLOAD Sony KV-DA29M31 Service Manual ↓ Size: 16.93 MB | Pages: 127 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony KV-DA29M31 in PDF for free, which will help you to disassemble, recover, fix and repair Sony KV-DA29M31 TV. Information contained in Sony KV-DA29M31 Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.