DOWNLOAD Sony KV-BT21M80 (serv.man3) Service Manual ↓ Size: 9.15 MB | Pages: 78 in PDF or view online for FREE

4

x

B

To prevent the TV from falling, use the supplied  screws, clamps and band to
secure the TV.

Screw the band to the TV stand and to the
provided hole at the rear of your TV.

(1) Put a cord or chain through the clamps.
(2) Screw one clamp to a wall or pillar and

the other clamp to the provided hole at
the rear of your TV.

Note
• Use only the supplied screws.  Use of other screws may damage the TV.

01GB02WAR-MIX.p65

12/19/03, 9:22 AM

4

Black

5

Connecting optional components ... 21
Troubleshooting ................................. 22
Specifications ...................... Back cover

Getting Started ..................................... 6
Setting up your TV
(“Initial Setup”) .................................... 7

TV top control, front and rear
panels ..................................................... 8
Using the remote control and
basic functions ...................................... 9

Viewing Teletext

(KV-BT21M81 only) ........................... 11

Introducing the menu system .......... 12

Changing the “Picture” setting ........ 15

Changing the “Sound” setting ......... 16

Changing the “Timer” setting .......... 17

Changing the “Channel Setup”
setting .................................................. 18

Changing the “Setup” setting .......... 20

01GB03TOC-MIX.p65

12/19/03, 9:22 AM

5

Black

6

Installation

x

b

b

Insert the batteries (supplied) into the remote.

Note
• Do not use old or different types of batteries together.

Set up the TV by following the instructions of the
“Initial Setup” menu (see page 7).

Plug in the power cord, then press ! on the TV to
turn it on.

Note
• The 1 (standby) indicator flashes green for a few seconds

when turning on the TV. This does not indicate a
malfunction.

Connect the antenna cable (not supplied) to 8
(antenna input) at the rear of the TV.

Tip
• You can also connect your TV to other optional components

(see page 21).

01GB04INS-MIX.p65

12/19/03, 9:22 AM

6

Black

7

Installation

x

When you turn on your TV for the first time, the “Initial Setup” menu will appear.
You may change the menu language, preset the TV channels automatically and adjust
the picture position using the buttons on the top control panel.

• The MENU, 

 and V/v/B/b buttons on the remote control can also be used for the

operations below.

Press 2 +/– to select the desired menu
language, then press t.

The selected menu language appears.

Press 2 +/– to select “Yes”, then press t
to preset the channels automatically or
select “No” to skip automatic channel
presetting.

Once you select “Yes”, your TV will start
searching for all the available channels.

If the message “No channel found. Please
connect cable/antenna.” appears, check your
TV connections, then press t.

Press 2 +/–  to adjust the bars on the
top and bottom of the menu if they are
slanted, then press t (KV-BT21M81
only).

If no adjustment is necessary, then press
t.

Press 2 +/–  to select “No”, then press t.
This menu will not appear again the next
time you turn on the TV by pressing !.

To allow this menu to appear again, select
“Yes”, then press t.

Tips
• You can immediately go to the end of the “Initial Setup” menu by pressing MENU.
• You can also set up your TV by pressing the MENU button on the top control panel for about

five seconds or using the menu system (see page 12).

Start auto program now?

01GB04INS-MIX.p65

12/19/03, 9:23 AM

7

Black