DOWNLOAD Sony KV-AR29M90B Service Manual ↓ Size: 13.08 MB | Pages: 96 in PDF or view online for FREE

25

Additional Information

23

–

21

–

–

21

• Check the antenna cable and connection

on the TV, VCR and at the wall.

• Check the antenna setup.

Contact a Sony dealer for advice.

• Display the “Channel Setup” menu and

select “Manual Program” to preset the
channel again.

• Try using a booster.

• Turn off or disconnect the booster if it is in

use.

• Display the “Channel Setup” menu and

select the appropriate “TV System”.

• The connection is loose

or the cable is
damaged.

• The antenna setup is

inappropriate.

• Channel presetting is

inappropriate or
incomplete.

• Signal transmission is

low.

• Broadcast signals are

too strong.

• The TV system setting

is inappropriate.

x

If you find any problem while viewing your TV, you can either use the Reset
function or check the Troubleshooting guide below. If the problem persists,
contact your Sony dealer.

Press the RESET button on your remote control.
Your TV will go blank for a few seconds
then the “Initial Setup” menu will appear.

Pressing RESET will set your TV to the factory
setting, but certain problems may be solved.

TV

RESET

01GB08ADV-HK.p65

16/9/03, 10:08 AM

25

Black

26

Additional Information

• The power cord,

antenna or VCR is not
connected.

• The TV is not turned

on.

• The volume level is too

low.

• The sound is muted.

• There is local

interference from cars,
neon signs, hair dryers,
power generators, etc.

• Broadcast signals are

reflected by nearby
mountains or
buildings.

• The antenna setup is

inappropriate.

• Use of a booster is

inappropriate.

• The color level setting

is too low.

• The color system

setting is
inappropriate.

• The antenna setup is

inappropriate.

• Check the power cord, antenna and VCR

connections.

• Press 

 ?/1

 (power).

• Press ! (main power) on the TV to turn

off the TV for about five seconds, then
turn it on again.

• Press 2 + to increase the volume level.

• Press 

 to cancel the muting.

• Do not use a hair dryer or other

equipment near the TV.

• Check the antenna setup. Contact a Sony

dealer for advice.

• Use a highly directional antenna.

• Use the fine tuning (“Fine”) function.

• Check the antenna setup. Contact a Sony

dealer for advice.

• Turn off or disconnect the booster if it is in

use.

• Display the “Picture” menu and select

“Personal” of “Mode”, then adjust the
“Color” level in “Picture Adjustment”.

• Display the “Setup” menu and check the

“Color System” setting (usually set this to
“Auto”).

• Check the antenna setup. Contact a Sony

dealer for advice.

23

9

8

9

9

–

–

–

21

–

–

16

22

–

01GB08ADV-HK.p65

16/9/03, 10:08 AM

26

Black

27

Additional Information

The 1 (standby)
indicator on
your TV flashes
red several
times after
every three
seconds.

–

22

–

23

–

–

–

–

• The magnetic

disturbance from
external speakers or
other equipment, or
the direction of the
earth’s magnetic field
may affect the TV.

• The magnetic

disturbance from
external speakers or
other equipment, or the
direction of the earth’s
magnetic field may
affect the TV.

• The connection is loose

or the cable is damaged.

• The antenna setup is

inappropriate.

• Your TV’s self-

diagnosis function
indicates the possible
problems.

• Changes in room

temperature sometimes
make the TV cabinet
expand or contract,
causing a noise. This
does not indicate a
malfunction.

• The TV’s

demagnetizing function
is working.
This does not indicate a
malfunction.

• Keep external speakers or other electrical

equipment away from the TV.

• Display the “Setup” menu and adjust

“Picture Rotation” so that the picture
position is optimal.

• Keep external speakers or other

equipment away from the TV. Do not
move the TV while the TV is turned on.
Press ! (main power) on the TV to turn
off the TV for about 15 minutes, then turn
it on again to demagnetize the TV.

• Check the antenna cable and connection

on the TV, VCR and at the wall.

• Check the antenna setup. Contact a Sony

dealer for advice.

• Count the number of times the 1

(standby) indicator flashes. Press !
(main power) to turn off your TV.
Contact your nearest Sony service center.

—

—

01GB08ADV-HK.p65

16/9/03, 10:08 AM

27

Black

28

Additional Information

8 

i

x

Design and specifications are subject to change without notice.

220-240 V AC, 50/60 Hz

Indicated on the rear of the TV

B/G, I, D/K, M

PAL, PAL 60, SECAM, NTSC3.58, NTSC4.43

NICAM Stereo/Bilingual B/G, I;
A2 Stereo/Bilingual B/G

VHF : E2 to E12
UHF : E21 to E69
CATV : S01 to S03, S1 to S41

UHF : B21 to B68
CATV : S01 to S03, S1 to S41

VHF : C1 to C12, R1 to R12
UHF : C13 to C57, R21 to R60
CATV : S01 to S03, S1 to S41, Z1 to Z39

VHF : A2 to A13
UHF : A14 to A79
CATV : A-8 to A-2, A to W+4, W+6 to W+84

75-ohm external terminal

5 W + 5 W

Input: 3

Output: 1

Phono jacks; 1 Vp-p, 75 ohms

Input: 3

Output: 1

Phono jacks; 500 mVrms

Input: 1

Phono jacks;
Y: 1 Vp-p, 75 ohms,
sync negative
C

B

: 0.7 Vp-p, 75 ohms

C

R

: 0.7 Vp-p, 75 ohms

Audio: 500 mVrms

Output: 1

Stereo minijack

29 type

25 type

72

64

Measured diagonally

68

60

Measured diagonally

765 

× 578 × 502

650 

× 517 × 496

49

38

Sony Corporation

01GB08ADV-HK.p65

16/9/03, 10:08 AM

28

Black