DOWNLOAD Sony KV-AR29M90 Service Manual ↓ Size: 683.52 KB | Pages: 32 in PDF or view online for FREE

© 2002  Sony Corporation

4-088-211-11 (2)

M90

Operating Instructions

• Before operating the unit, please read this manual thoroughly and retain

it for future reference.

使用說明書

• 使用本電視機之前請先詳細閱讀此手冊﹐並妥善保存以備日後用作參考。

使用说明书

• 使用本电视机之前请详细阅读此手册，并妥善保存以备日后用作参考。

2

•  Dangerously high voltages are present inside the TV.

•  TV operating voltage: 220-240 V AC.

• Do not plug in the power cord until you have completed making all other

connections; otherwise a minimum leakage current might flow through the antenna
and other terminals to ground.

• To avoid battery leakage and damage to the remote, remove the batteries from the

remote if you are not going to use it for several days.  If any liquid leaks from the
batteries and touches your skin, immediately wash it away with water.

Do not open the cabinet and the rear cover of the
TV as high voltages and other hazards are present
inside the TV.  Refer servicing and disposal of the
TV to qualified personnel.

Your TV is recommended for home use only.
Do not use the TV in any vehicle or where it may
be subject to excessive dust, heat, moisture or
vibrations.

To prevent fire or shock hazard, do not expose the
TV to rain or moisture.

Do not operate the TV if any liquid or solid object
falls into it.  Have it checked immediately by
qualified personnel only.

Do not block the ventilation openings of the TV.
Do not install the TV in a confined space, such as a
bookcase or built-in cabinet.

For children’s safety, do not leave children
alone with the TV.  Do not allow children to
climb onto it.

Clean the TV with a dry and soft cloth.
Do not use benzine, thinner, or any other chemicals to
clean the TV.  Do not attach anything (e. g., adhesive
tape, cellophane tape, glue) on the painted cabinet of
the TV. Do not scratch the picture tube.

For your own safety, do not touch any part of the
TV, the power cord and the antenna cable during
lightning storms.

3

Install the TV on a stable TV stand and floor which
can support the TV set weight. Ensure that the TV
stand surface is flat and its area is larger than the
bottom area of the TV.

Do not place any objects on the TV.

Do not plug in too many appliances to the same
power socket.  Do not damage the power cord.

Pull the power cord out by the plug.  Do not pull
the power cord itself.  Even if your TV is turned
off, it is still connected to the AC power source
(mains) as long as the power cord is plugged in.
Unplug the TV before moving it or if you are not
going to use it for several days.

4

x

To prevent the TV from falling, use the supplied  screws, clamps and band to
secure the TV.

(1) Screw the band and one clamp to the

provided hole at the rear of your TV.

(2) Screw the band to the TV stand.
(3) Put a cord or chain through both

clamps and screw the other clamp to a
wall or pillar.

(1) Attach each end of a cord or chain to

the provided holders at the rear of
your TV.

(2) Securely fix the attached cord or chain

to a wall or pillar using an attachment
which can support the TV set weight.

Note
• Use only the supplied screws.  Use of other screws may damage the TV.