Sony KV-AR29M80A Service Manual ▷ View online
Using Your New TV
Using Y
our New TV
7
Sony KV-AR29M81A Group R24 (GB)_4-092-810-13 (1)
DVD player
To
L (white)
R (red)
L (white)
R (red)
Audio cable
(not supplied)
(not supplied)
To component
video output
video output
Component video cable
(not supplied)
(not supplied)
To audio
output
output
: Signal flow
To
(component
video input)
(component
video input)
Connect
To (on the DVD player)
Y (green)
Y
C
B
(blue)
C
b
, B-Y or P
B
C
R
(red)
C
r
, R-Y or P
R
Rear of TV
VIDEO
R-AUDIO-L
LINE OUT
Y
COMPONENT VIDEO OUT
S VIDEO OUT
C
B
C
R
R
L
Y
C
B
C
R
Connecting a DVD player using the
(component video
input) jacks
1 Connect R and L under
(component video input) on your TV to the LINE OUT,
AUDIO R and L output connectors on your DVD player.
2 Using a component video cable, connect Y, C
B
, and C
R
under
(component video
input) on your TV to the COMPONENT VIDEO OUT Y, C
B
, and C
R
output
connectors on your DVD player.
Notes
• If your DVD player can output interlace and progressive mode signals,
• If your DVD player can output interlace and progressive mode signals,
select the interlace output when connecting to
(component video
input) on your TV. Your TV can receive either 525i/60Hz or 625i/50Hz
interlace signals.
interlace signals.
• Some DVD player terminals may be labeled differently:
• Since the high quality pictures on a DVD disc contain a lot of information,
picture noise may appear. In this case, adjust the sharpness (“SHARP”)
(see page 16).
(see page 16).
Using Your New TV
8
Sony KV-AR29M81A Group R24 (GB)_4-092-810-13 (1)
Securing the TV
To prevent the TV from falling, use the supplied screws, clamps and band to
secure the TV.
secure the TV.
20 mm
3.8 mm
screws
clamps band
Screw the band to the TV stand and to the
provided hole at the rear of your TV.
provided hole at the rear of your TV.
(1) Put a cord or chain through the clamps.
(2) Screw one clamp to a wall or pillar and
(2) Screw one clamp to a wall or pillar and
the other clamp to the provided hole at
the rear of your TV.
the rear of your TV.
(1) Attach each end of a cord or chain to
the provided holders at the rear of
your TV.
your TV.
(2) Securely fix the attached cord or chain
to a wall or pillar using an attachment
which can support the TV set weight.
which can support the TV set weight.
Note
• Use only the supplied screws. Use of other screws may damage the TV.
or
or
Using Your New TV
Using Y
our New TV
9
Sony KV-AR29M81A Group R24 (GB)_4-092-810-13 (1)
Presetting
channels
channels
You can preset up to 100 TV channels in
numerical sequence from program
number 1 using the remote and the
buttons on your TV as well.
numerical sequence from program
number 1 using the remote and the
buttons on your TV as well.
Presetting channels automatically
1
Press ! to turn on the TV.
2
Press AUTO PROGR.
Note
• During automatic channel presetting, your TV screen will indicate “B/G” ,
• During automatic channel presetting, your TV screen will indicate “B/G” ,
“I”, “D/K” or “M” for the TV system (“TV SYS”).
To preset channels automatically from a specified program number
(1) Press SELECT until “AUTO PROGRAM” appears.
(2) Press + or – to enter the “AUTO PROGRAM” mode.
The on-screen display will start flashing.
(3) Press PROGR +/– or the number buttons until the desired program number
appears.
(4) Press + or – to start presetting channels automatically.
TV
1
2
3
4
6
7
8
9
-/--
0
5
JUMP
SOUND
MODE
FAVORITE
PROGR
?/1
Number buttons
SELECT
2
+/–
PROGR +/–
+ or –
PIC MODE
VHF LOW B/G
AUTO
PROGR
AUTO
PROGR
PROGR
SELECT
AUTO
PROGR
PROGR
ENTER
SELECT
2
L(MONO)
R
continued
Using Your New TV
10
Sony KV-AR29M81A Group R24 (GB)_4-092-810-13 (1)
Presetting channels (continued)
1
1
2
3
4
5
6
7
8
0
-/--
9
PROGR
Presetting channels manually
1
Press SELECT until
“MANUAL PROGRAM”
appears.
“MANUAL PROGRAM”
appears.
2
Press + or – to enter the
“MANUAL PROGRAM”
mode.
“MANUAL PROGRAM”
mode.
3
Press PROGR +/– or the
number buttons until the
desired program number
appears.
number buttons until the
desired program number
appears.
4
Press + or – until the
desired channel picture
appears.
desired channel picture
appears.
5
Press SELECT to exit the
“MANUAL PROGRAM”
mode.
“MANUAL PROGRAM”
mode.
To change the TV system setting
If the picture or sound is abnormal when receiving programs through the 8 (antenna
input) terminal
input) terminal
(1) Press SELECT until “TV SYS” appears.
(2) Press + or – to select the appropriate
TV system until the picture or sound
quality is optimal.
quality is optimal.
B/G
I
D/K
M
VHF
LOW B/G
TV SYS: B/G
b
MANUAL PROGRAM
SELECT
SELECT
b
b
or
Click on the first or last page to see other KV-AR29M80A service manuals if exist.