Sony KV-AR292M50 Service Manual ▷ View online
Sony KV-AR292M50 Group D7 (
GB
)_4-103-103-11 (1)
3
Install the TV on a stable TV stand and floor which
can support the TV set weight. Ensure that the TV
stand surface is flat and its area is larger than the
bottom area of the TV.
can support the TV set weight. Ensure that the TV
stand surface is flat and its area is larger than the
bottom area of the TV.
Do not plug in too many appliances to the same
power socket. Do not damage the power cord.
power socket. Do not damage the power cord.
Pull the power cord out by the plug. Do not pull
the power cord itself. Even if your TV is turned
off, it is still connected to the AC power source
(mains) as long as the power cord is plugged in.
Unplug the TV before moving it or if you are not
going to use it for several days.
the power cord itself. Even if your TV is turned
off, it is still connected to the AC power source
(mains) as long as the power cord is plugged in.
Unplug the TV before moving it or if you are not
going to use it for several days.
To prevent fire or shock hazard, do not expose the
TV to rain or moisture.
TV to rain or moisture.
4
Sony KV-AR292M50 Group D7 (
GB
)_4-103-103-11 (1)
x
Securing the TV
To prevent the TV from falling, use the supplied screws, clamps and band to
secure the TV.
secure the TV.
20 mm
3.8 mm
screws
clamps band
or
Screw the band to the TV stand and to the
provided hole at the rear of your TV.
provided hole at the rear of your TV.
(1) Put a cord or chain through the clamps.
(2) Screw one clamp to a wall or pillar and
(2) Screw one clamp to a wall or pillar and
the other clamp to the provided hole at
the rear of your TV.
the rear of your TV.
(1) Attach each end of a cord or chain to
the provided holders at the rear of
your TV.
your TV.
(2) Securely fix the attached cord or chain
to a wall or pillar using an attachment
which can support the TV set weight.
which can support the TV set weight.
Note
• Use only the supplied screws. Use of other screws may damage the TV.
• Use only the supplied screws. Use of other screws may damage the TV.
or
5
Sony KV-AR292M50 Group D7 (
GB
)_4-103-103-11 (1)
GB
Menu Adjustment
Introducing the menu system .......... 12
Changing the “Picture” setting ........ 15
Changing the “Sound” setting ......... 17
Changing the “Timer” setting .......... 19
Changing the “Channel Setup”
setting .................................................. 20
setting .................................................. 20
Changing the “Setup” setting .......... 22
Additional Information
Connecting optional components ... 23
Troubleshooting ................................. 25
Specifications ...................... Back cover
Troubleshooting ................................. 25
Specifications ...................... Back cover
Table of Contents
Installation
Getting Started ..................................... 6
Setting up your TV
(“Initial Setup”) .................................... 7
Setting up your TV
(“Initial Setup”) .................................... 7
Overview of Controls
TV front and rear panels ..................... 8
Using the remote control and
basic functions ...................................... 9
Using the remote control and
basic functions ...................................... 9
Advanced Operations
Selecting the picture and
sound modes ...................................... 11
sound modes ...................................... 11
6
Installation
Sony KV-AR292M50 Group D7 (
GB
)_4-103-103-11 (1)
Installation
x
Getting Started
b
b
1
Step 1
Insert the batteries (supplied) into the remote.
Note
• Do not use old or different types of batteries together.
• Do not use old or different types of batteries together.
Step 2
Step 3
Step 4
Set up the TV by following the instructions of the
“Initial Setup” menu (see page 7).
“Initial Setup” menu (see page 7).
Plug in the power cord, then press ! on the TV to
turn it on.
turn it on.
Note
• The 1 (standby) indicator flashes green for a few seconds
• The 1 (standby) indicator flashes green for a few seconds
when turning on the TV. This does not indicate a
malfunction.
malfunction.
Connect the antenna cable (not supplied) to 8
(antenna input) at the rear of the TV.
(antenna input) at the rear of the TV.
Tip
• You can also connect your TV to other optional components
• You can also connect your TV to other optional components
(see page 23).
Click on the first or last page to see other KV-AR292M50 service manuals if exist.