DOWNLOAD Sony KV-AR25M81A Service Manual ↓ Size: 5.04 MB | Pages: 89 in PDF or view online for FREE

Using Your New TV

8

To prevent the TV from falling, use the supplied  screws, clamps and band to
secure the TV.

Screw the band to the TV stand and to the
provided hole at the rear of your TV.

(1) Put a cord or chain through the clamps.
(2) Screw one clamp to a wall or pillar and

the other clamp to the provided hole at
the rear of your TV.

(1) Attach each end of a cord or chain to

the provided holders at the rear of
your TV.

(2) Securely fix the attached cord or chain

to a wall or pillar using an attachment
which can support the TV set weight.

• Use only the supplied screws.  Use of other screws may damage the TV.

Using Your New TV

9

You can preset up to 100 TV channels in
numerical sequence from program
number 1 using the remote and the
buttons on your TV as well.

Press ! to turn on the TV.

Press AUTO PROGR.

Note
• During automatic channel presetting, your TV screen will indicate “B/G” ,

“I”, “D/K” or “M” for the TV system (“TV SYS”).

(1) Press SELECT until “AUTO PROGRAM” appears.

(2) Press + or – to enter the “AUTO PROGRAM” mode.

The on-screen display will start flashing.

(3) Press PROGR +/– or the number buttons until the desired program number

appears.

(4) Press + or – to start presetting channels automatically.

TV

1

2

3

4

6

7

8

9

0

5

JUMP

SOUND 

MODE

 

FAVORITE

PROGR

?/1

2

AUTO

PROGR

AUTO

PROGR

PROGR

SELECT

AUTO
PROGR

ENTER

SELECT

2

L(MONO)

R

Using Your New TV

10

PROGR

Press SELECT until
“MANUAL PROGRAM”
appears.

Press + or – to enter the
“MANUAL PROGRAM”
mode.

Press PROGR +/– or the
number buttons until the
desired program number
appears.

Press + or – until the
desired channel picture
appears.

Press SELECT to exit the
“MANUAL PROGRAM”
mode.

If the picture or sound is abnormal when receiving programs through the 8 (antenna
input) terminal

(1) Press SELECT until “TV SYS” appears.

(2) Press + or – to select the appropriate

TV system until the picture or sound
quality is optimal.

b

SELECT

SELECT

b

b

Using Your New TV

11

If the color is abnormal when receiving programs through the 8 (antenna input)
terminal or the t (video input) jack.

(1) Press SELECT until “COLOR SYS” appears.

(2) Press + or – to select the appropriate

color system until the color is
optimal.

Tip
• Normally set “COLOR SYS” to “AUTO”.

Press PROGR +/– or the number buttons until the unused or unwanted
program number appears.

Press SELECT until “MANUAL PROGRAM” appears.

Press + or – to enter the “MANUAL PROGRAM” mode.

Press PIC MODE.

Press SELECT to exit the “MANUAL PROGRAM” mode.

Preset the channel automatically or manually.

Tip
• You can also use SELECT and 2 +/– on the TV to preset channels and

skip program numbers.

The fine tuning (FINE) function may help to reduce the following problems:
incomplete Teletext display double images and lines moving across the TV screen.

You can use the fine tuning function as below:

(1) Select the program number you want to adjust.
(2) Press SELECT until “MANUAL PROGRAM” appears on the screen.
(3) Press + or – on the remote control.
(4) Press 

 to display “FINE” on the screen.

(5) Press + or – continuously until the above problems are minimized.

The + or – icon on the screen flashes while tuning.

(6) Press SELECT to return to normal screen.