Sony KV-AR21M50 Service Manual ▷ View online
4
Sony KV-AR21M50 Group A29 (
GB
)_4-101-321-11 (1)
x
Securing the TV
To prevent the TV from falling, use the supplied screws, clamps and band to
secure the TV.
secure the TV.
20 mm
3.8 mm
screws
clamps band
Screw the band to the TV stand and to the
provided hole at the rear of your TV.
provided hole at the rear of your TV.
(1) Put a cord or chain through the clamps.
(2) Screw one clamp to a wall or pillar and
(2) Screw one clamp to a wall or pillar and
the other clamp to the provided hole at
the rear of your TV.
the rear of your TV.
Note
• Use only the supplied screws. Use of other screws may damage the TV.
• Use only the supplied screws. Use of other screws may damage the TV.
or
01GB02WAR-VTN.p65
29/12/2003, 5:52 PM
4
Black
5
Sony KV-AR21M50 Group A29 (
GB
)_4-101-321-11 (1)
Additional Information
Connecting optional components ... 22
Troubleshooting ................................. 24
Specifications ...................... Back cover
Troubleshooting ................................. 24
Specifications ...................... Back cover
Table of Contents
Installation
Getting Started ..................................... 6
Setting up your TV
(“Initial Setup”) .................................... 7
Setting up your TV
(“Initial Setup”) .................................... 7
Overview of Controls
TV top control, front and
rear panels ............................................. 8
Using the remote control and
basic functions ...................................... 9
rear panels ............................................. 8
Using the remote control and
basic functions ...................................... 9
Advanced Operations
Selecting the picture and sound
modes .................................................. 11
modes .................................................. 11
Menu Adjustment
Introducing the menu system .......... 12
Changing the “Picture” setting ........ 15
Changing the “Sound” setting ......... 16
Changing the “Timer” setting .......... 18
Changing the “Channel Setup”
setting .................................................. 19
setting .................................................. 19
Changing the “Setup” setting .......... 21
GB
01GB03TOC-VTN.p65
29/12/2003, 5:53 PM
5
Black
6
Installation
Sony KV-AR21M50 Group A29 (
GB
)_4-101-321-11 (1)
Installation
x
Getting Started
b
b
1
Step 1
Insert the batteries (supplied) into the remote.
Note
• Do not use old or different types of batteries together.
• Do not use old or different types of batteries together.
Step 2
Step 3
Step 4
Set up the TV by following the instructions of the
“Initial Setup” menu (see page 7).
“Initial Setup” menu (see page 7).
Plug in the power cord, then press ! on the TV to
turn it on.
turn it on.
Note
• The 1 (standby) indicator flashes green for a few seconds
• The 1 (standby) indicator flashes green for a few seconds
when turning on the TV. This does not indicate a
malfunction.
malfunction.
Connect the antenna cable (not supplied) to 8
(antenna input) at the rear of the TV.
(antenna input) at the rear of the TV.
Tip
• You can also connect your TV to other optional components
• You can also connect your TV to other optional components
(see page 22).
01GB04INS-VTN.p65
29/12/2003, 5:53 PM
6
Black
7
Installation
Installation
Sony KV-AR21M50 Group A29 (
GB
)_4-101-321-11 (1)
x
Setting up your TV
(“Initial Setup”)
When you turn on your TV for the first time, the “Initial Setup” menu will appear.
You may change the menu language, preset the TV channels automatically and adjust
the picture position using the buttons on the top control panel.
You may change the menu language, preset the TV channels automatically and adjust
the picture position using the buttons on the top control panel.
Tip
• The MENU,
and V/v/B/b buttons on the remote control can also be used for the
operations below.
1
Press 2 +/– to select the desired menu
language, then press t.
language, then press t.
The selected menu language appears.
2
Press 2 +/– to select “Yes”, then press t
to preset the channels automatically or
select “No” to skip automatic channel
presetting.
to preset the channels automatically or
select “No” to skip automatic channel
presetting.
Once you select “Yes”, your TV will start
searching for all the available channels.
searching for all the available channels.
If the message “No channel found. Please
connect cable/antenna.” appears, check your
TV connections, then press t.
connect cable/antenna.” appears, check your
TV connections, then press t.
3
Press 2 +/– to adjust the bars on the
top and bottom of the menu if they are
slanted, then press t.
top and bottom of the menu if they are
slanted, then press t.
If no adjustment is necessary, then press t.
4
Press 2 +/– to select “No”, then press t.
This menu will not appear again the next
time you turn on the TV by pressing !.
This menu will not appear again the next
time you turn on the TV by pressing !.
To allow this menu to appear again, select
“Yes”, then press t.
“Yes”, then press t.
Tips
• You can immediately go to the end of the ”Initial Setup” menu by pressing MENU.
• You can also set up your TV by pressing the MENU button on the top control panel for about
• You can immediately go to the end of the ”Initial Setup” menu by pressing MENU.
• You can also set up your TV by pressing the MENU button on the top control panel for about
five seconds or using the menu system (see page 12).
Start auto program now?
01GB04INS-VTN.p65
29/12/2003, 5:53 PM
7
Black
Click on the first or last page to see other KV-AR21M50 service manuals if exist.