Sony KV-34FQ75A Service Manual ▷ View online
13
11
Operation
Teletext
Using the Teletext menu
1. With Teletext switched on, press the MENU button on the remote control to display the
menu on the TV screen.
2. Press
v or V to select your chosen item on the screen then press B to display the relevant
sub menu.
3. To remove the Teletext menu from the screen, press the MENU button.
Top/Bottom/Full
The Top/Bottom/Full sub menu allows you to enlarge different sections of the Teletext page.
Press
Press
v to enlarge the upper half of the screen, Press V to enlarge the lower half. Press the OK
button to restore the page to normal size. Press
b to return to the Teletext menu screen.
Text Clear*
*available on Teletext Only and Mix modes (Refer to ‘Switching Teletext on and off’)
Text Clear is a function that displays a TV channel while a Teletext page is being searched for.
Reveal
Some Teletext pages contain hidden information (eg for a quiz), which can be revealed.
Time Page*
*depending on availability of service,Time Page is available on Teletext Only and Mix modes.
Time Page allows a time-coded Teletext page (such as an alarm page), to be displayed at a set
time.
time.
Top:
Bottom:
Full: OK
Teletext
Top / Bottom / Full
Text Clear
Reveal
Time Page
Page Overview
Select:
Enter Menu:
1. Press the
button on the remote control twice to select full screen text.
2. Press the MENU button to display the ‘Teletext’ menu.
3. Press
3. Press
v or V to highlight ‘Text Clear’ and press B to select.
4. The current TV channel is displayed. Once the text page has been found a blue
symbol will appear in the top left hand corner of the screen.
5. Press the
button on the remote control to view the page.
1. In text mode press the MENU button on the remote control to access the ‘Teletext’ menu.
2. Press
2. Press
v or V to highlight ‘Reveal’ and press B to select. The hidden information is
displayed on the screen.
1. In Text mode press the MENU button on the remote control to access the ‘Teletext’
menu.
2. Press
v or V to highlight ‘Time Page’ and press B to select. The ‘Time Page’ sub menu
is displayed.
3. Enter the desired page number using the numbered buttons on the remote control.
4. Enter the desired time using the remote control.
5. Press OK to confirm the settings. The TV will exit Teletext mode and the time will be
4. Enter the desired time using the remote control.
5. Press OK to confirm the settings. The TV will exit Teletext mode and the time will be
displayed in the top left hand corner of the screen. At the requested time the desired page
is displayed.
is displayed.
Time Page
PAGE
TIME
Select Page: 0-9
Next:
- - : - -
– – –
Page Overview*
*only available if TOP-Text is transmitted by the TV station.
In this menu the TOP-Text pages are divided into two columns, the first column showing
‘blocks’ of pages and the second showing ‘groups’ of pages.
‘blocks’ of pages and the second showing ‘groups’ of pages.
1. Press
b or B to select the first or second column.
2. Press
v or V to select the relevant ‘group’ or ‘block’ of pages.
3. Press the OK button to display the chosen pages.
10
Operation
Most TV channels broadcast information via Teletext. The index page of the teletext service (usually page 100) gives you
information on how to use the service. Please use a TV channel with a strong signal, otherwise there may be Teletext errors.
information on how to use the service. Please use a TV channel with a strong signal, otherwise there may be Teletext errors.
Teletext
Switching Teletext on and off
1. Select the TV channel which carries the teletext service you want to view.
2. Press the
button once for Picture and Teletext (P&T). The screen is divided in two,
with the TV channel in the right corner and the Teletext display on the left.
In P&T mode press
then press PROGR+/- to change the channel of the TV
screen. Press
b or B to change the size of the TV screen then press
again
to resume normal teletext reception.
3. Press
twice to get Teletext only.
4. Press
three times for Mix mode.
5. Press
a fourth time to switch off Teletext.
To exit Teletext mode at any time, press the
button on the remote control.
Selecting a Teletext page
Input three digits for the page number using the numbered buttons on the remote control. If
you make a mistake, type in any three digits then re-enter the correct page number.
you make a mistake, type in any three digits then re-enter the correct page number.
Using Other Teletext Functions
Selecting the next or preceding page
Press the
or
buttons on the remote control to select the previous or next page.
Selecting a sub page
A teletext page may consist of several sub pages. In this case an information line is displayed,
showing the number of subpages. Select the sub page by pressing
showing the number of subpages. Select the sub page by pressing
v or V.
To freeze a Teletext page
Press the
button to freeze the page. Press again to cancel the freeze.
Revealing the index page
Press the
button to reveal the index page (normally page 100).
Using colour buttons to access pages (Fastext)
(only available if the TV station broadcasts Fastext signals)
When the colour coded menu appears at the bottom of a page, press a coloured button on the
remote control (green, red, yellow or blue) to access the corresponding page.
When the colour coded menu appears at the bottom of a page, press a coloured button on the
remote control (green, red, yellow or blue) to access the corresponding page.
Using the feature ‘Page Catching’
1. Press the numbered buttons on the remote control to select a teletext page which has
several page numbers on it (eg the index page).
2. Press the OK button.
3. Press
3. Press
v or V to select the desired page number then press the OK button. The requested
page is displayed after some seconds.
Index
TELETEXT
Programme
News
Sport
Weather
25
153
101
98
Index
TELETEXT
Programme
News
Sport
Weather
25
153
101
98
Index
TELETEXT
Programme
News
Sport
Weather
25
153
101
98
m
m
216-02
01
03
04
05
06
07
08
02
14
23
Additional Information
Specifications
TV system
B/G/H, D/K
Colour system
PAL, SECAM
NTSC 3.58, 4.43 (only Video In)
NTSC 3.58, 4.43 (only Video In)
Channel coverage
See the ‘Channel Display Table’ below.
Picture tube
FD Trinitron, Approx. 86cm (34 inches)
Rear Terminals
/
21-pin Euro connector (CENELEC standard) including audio/
video input, RGB input, TV audio/video output.
/
21-pin Euro connector (CENELEC standard) including audio/
video input, S-video input, Selectable audio/video output.
/
21-pin Euro connector (CENELEC standard) including audio/
video input, S-video input, Monitor audio/video output.
L/G/S/I
RCA connectors, variable output for audio signals.
R/D/D/D
RF In
Front Terminals
Video input -phono jacks
Audio inputs - phono jacks
S video input - 4 pin DIN
Headphones jack - minijack stereo
Audio inputs - phono jacks
S video input - 4 pin DIN
Headphones jack - minijack stereo
1
1
2
s
2
3
s
3
4
4
s
4
Sound output
Left/Right:
2x20W (Music Power)
2x10W (RMS)
2x10W (RMS)
Sub woofer: 30W (Music Power)
15W (RMS)
Power consumption
170W
Dimensions (wxhxd)
Approx. 891x727x620mm
Weight
Approx. 82kg
Accessories supplied
RM-893 remote control (1)
IEC designated size AA batteries (2)
IEC designated size AA batteries (2)
Optional accessory
TV Stand:
TV Stand:
SU-34FQ1
Other features
Flat display Trinitron tube, noise reduction, DRC 50Hz
picture, DRC 100Hz picture, PAP, PAT, M-PIP, graphic
equaliser, 2000 page TEXT memory, personal ID, sleep timer,
NexTView, Digital Comb Filter, second tuner.
picture, DRC 100Hz picture, PAP, PAT, M-PIP, graphic
equaliser, 2000 page TEXT memory, personal ID, sleep timer,
NexTView, Digital Comb Filter, second tuner.
Design and specifications are subject to change
without notice.
without notice.
Channel Display Table
Receivable Channels
Channel Displays
B/G/H
E2..12, 21..69
C02..C12, C21..69
KABEL-TV (1)
S1..S41
S01..S41
KABEL-TV (2)
S01..S05
S42..S46
M1..M10
S01..S10
U1..U10
S11.S20
ITALIEN
A, B..H, H1, H2
C13, C14..C20, C11, C12
D/K
R01..R12, R21..R69
C01..C12, C21..C69
S01..S05
S42..S46
24
Additional Information
Here are some simple solutions to problems which may affect the picture and sound.
•
If you continue to have these problems, have your TV serviced by qualified personnel.
•
NEVER open the casing yourself.
Troubleshooting
Problem
Suggested remedy
No picture (screen is dark), no sound.
•
Plug the TV in.
•
Press the
button on the front of the TV.
•
If the
indicator is on press the
button or a numbered
button on the remote control.
•
Check the aerial connection.
•
Turn the TV off for 3 or 4 seconds and then turn it on again
using the
button on the front of the TV.
Poor or no picture (screen is dark), but
good sound.
good sound.
•
Using the MENU system, select the Picture Adjustment
display. Adjust the brightness, picture and colour balance
levels.
display. Adjust the brightness, picture and colour balance
levels.
•
From the Picture Adjustment display select RESET to return
to the factory settings.
to the factory settings.
Good picture, no sound.
•
Press the
button on the remote control.
•
If
is displayed on the screen, press the
button on the
remote control.
No colour on colour programmes.
•
Using the MENU system, select the Picture Adjustment
display and adjust the colour setting.
display and adjust the colour setting.
•
From the Picture Adjustment display select RESET to return
to the factory settings.
to the factory settings.
Distorted picture when changing
programmes or selecting Teletext.
programmes or selecting Teletext.
•
Turn off any equipment connected to the scart connectors on
the rear of the TV.
the rear of the TV.
Remote control does not function.
•
Replace the batteries.
The standby indicator
on the TV
flashes.
•
Contact your nearest Sony service centre.
Interference on picture from external
equipment.
equipment.
•
Reduce sharpness level.
/
15
Remove the 12 rear cover fixing screws indicated. Take care
when removing the rear cover not to damage the speaker
cables [Disconnect the speaker connector] as speakers are
fitted inside the rear cover.
when removing the rear cover not to damage the speaker
cables [Disconnect the speaker connector] as speakers are
fitted inside the rear cover.
SECTION 2
DISASSEMBLY
2-1. Rear Cover Removal
To remove lift the main bracket rear slightly and slide the
chassis away from the beznet. Ensure that the interconnecting
leads are released from their purse locks to prevent damage
being caused.
chassis away from the beznet. Ensure that the interconnecting
leads are released from their purse locks to prevent damage
being caused.
2-2. Speaker Connector Disconnection
When refitting the chassis ensure that the main
bracket is located in the beznet guide slots before
sliding the chassis forwards. Refit the
interconnecting leads in their respective purse locks.
bracket is located in the beznet guide slots before
sliding the chassis forwards. Refit the
interconnecting leads in their respective purse locks.
Before completely removing the rear cover disconnect the
speaker connector which is located in a bracket on the inside
of the cover.
speaker connector which is located in a bracket on the inside
of the cover.
2-3. Chassis Removal and Refitting
=>
=>
=>
=>
=>
=>
=>
=>
=>
=>
=>
=>
16
2-4. Service Position
2-5. D1 Board Removal
2-6. J Board Removal
To remove the D1 Board release the clip circled and carefully
remove the board in a vertical direction.
remove the board in a vertical direction.
Position the chassis as indicated to access the its underside.
To gain access to the D Board follow the instructions on page
19. [Removal and Replacement of the main bracket bottom
plates ].
To gain access to the D Board follow the instructions on page
19. [Removal and Replacement of the main bracket bottom
plates ].
Release the two metal bracket support clips located on either
side of the chassis. Tilt the bracket very slightly away from the
shield case indicated. Release the J board board socket
retaining clip and carefully lift the complete assembly
vertically.
side of the chassis. Tilt the bracket very slightly away from the
shield case indicated. Release the J board board socket
retaining clip and carefully lift the complete assembly
vertically.
2-7. B3 Board Removal
Follow the steps indicated in removal of the J board. With the
assembly removed access to the B3 board shield is possible. To
remove the shield locate and remove the two screws positioned on
either side and at opposite ends of the shield. Release the B3 board clip
and remove in a vertical direction. Please ensure that the screws are
refitted after service.
assembly removed access to the B3 board shield is possible. To
remove the shield locate and remove the two screws positioned on
either side and at opposite ends of the shield. Release the B3 board clip
and remove in a vertical direction. Please ensure that the screws are
refitted after service.
Clip
Shield
case
case
Screw
Note :
Removal of the B3, E, and M1 printed circuit boards follows the
same procedure of releasing the securing clips as indicated
in the fig for D1 board removal.
Take care not to apply to great a pressure to the clips as this may
cause damage.
Removal of the B3, E, and M1 printed circuit boards follows the
same procedure of releasing the securing clips as indicated
in the fig for D1 board removal.
Take care not to apply to great a pressure to the clips as this may
cause damage.
=>
Click on the first or last page to see other KV-34FQ75A service manuals if exist.