DOWNLOAD Sony KV-32LS65AUS Service Manual ↓ Size: 34.24 MB | Pages: 69 in PDF or view online for FREE

SLEEP TIMER
The “Sleep Timer” option in the “Timer” menu 
allows you to select a time period for the TV to 
switch itself automatically into the standby 
mode.  

To do this: after selecting the option press

, 

then press

or

to set the time period delay 

(max. of 4 hours).
 
• While watching the TV, you can press the
 

remaining. 

• One minute before the TV switches itself into
  standby mode, the time remaining is displayed on
  the TV screen automatically.

AUTO TUNING
The “Auto Tuning” option in the “Set Up” 

menu allows you to automatically search for 

and store all available TV channels.

To do this: after selecting the option, press

 

and then proceed in the same way as in the 

steps 3 and 4 of the section “Switching On the 

TV and Automatically Tuning” on pages 7 

and 8.

PROGRAMME SORTING
The “Programme Sorting” option in the “Set 
Up” menu allows you to change the order in 
which the channels (TV Broadcast) appear on 
the screen. 

To do this: after selecting the option, press 

 

and then proceed in the same way as in step 5 b) 
of the section “Switching On the TV and 
Automatically Tuning” on page 8. 

Picture Adjustment

  Mode:  Personal
   Contrast
   Brightness
   Colour
   Sharpness
   Hue
   Reset

OK

Timer

Sleep Timer:                          Off
 

OK

Timer

Sleep Timer:                          Off

OK

continued...

Picture Adjustment

  Mode:  Personal
   Contrast
   Brightness
   Colour
   Sharpness
   Hue
   Reset

OK

Set Up

  Auto Tuning
  Programme Sorting
  Progamme Labels
  AV Preset
  Manual Programme Preset
  Detail Set Up

OK

Set Up

  Auto Tuning
  Programme Sorting
  Progamme Labels
  AV Preset
  Manual Programme Preset
  Detail Set Up

OK

Picture Adjustment

  Mode:  Personal
   Contrast
   Brightness
   Colour
   Sharpness
   Hue
   Reset

OK

Set Up

  Auto Tuning
  Programme Sorting
  Progamme Labels
  AV Preset
  Manual Programme Preset
  Detail Set Up

OK

Set Up

  Auto Tuning
  Programme Sorting
  Progamme Labels
  AV Preset
  Manual Programme Preset
  Detail Set Up

OK

continued...

MANUAL PROGRAMME PRESET
The “Manual Programme Preset” option in the 
“Set Up” menu allows you to:

 Preset channels or the VCR channel one by 

one to the programme order of your choice. 
To do this:

1 After selecting the ”Manual Programme 

Preset” option, press

 then with 

 option highlighted press

. 

Press

or

to select on which 

programme number you want to preset the 
channel. Then press

.

           For a VCR, select programme number 

“0” only.

2 After selecting the Channel option, press 

. Then press the number buttons to enter 

directly the channel number of the TV Broadcast or the channel of the VCR signal. If you 
do not know the channel number, press

or

to search for it. When you tune the 

desired channel, press OK twice to store.

Label a channel using up to five characters.

To do this: Highlighting the Programme option, press the PROG +/- button to select the 

programme number with the channel you wish to name. When the programme you want to 
name appears on the screen, select the Label option and press

. Next press

o

r

to 

select a letter, number or “-“ for a blank. Press 

to confirm this character. Select the other 

four characters in the same way. After selecting all the characters, press OK twice to store.

Fine tune the broadcast reception. Normally the automatic fine tuning (AFT) will give the 

best possible picture, however you can manually fine tune the TV to obtain a better picture 
reception in case the picture is distorted.

To do this: while watching the channel (TV Broadcast) you wish to fine tune, select the AFT 

option and press

. Next press

 

or

to adjust the fine tuning between -15 and +15. 

Finally press OK twice to store.

 Skip any unwanted programme numbers when they are selected with the PROG +/- 

buttons.

To do this: Highlighting the Programme option, press the PROG +/- button to select the 

programme number you want to skip. When the programme you want to skip

appears on the screen, select the Skip option and press 

. Next press

or

to select  

. Finally press OK twice to confirm and store.

 View and record scrambled channels when using a decoder connected to Scart 

 

/

  directly or through a VCR.

To do this: select the Decoder option and press

. Next press

or

to select On. Finally 

press OK twice to confirm and store.

S

Picture Adjustment

  Mode:  Personal
   Contrast
   Brightness
   Colour
   Sharpness
   Hue
   Reset

OK

Set Up

  Auto Tuning
  Programme Sorting
  Progamme Labels
  AV Preset
  Manual Programme Preset
  Detail Set Up

OK

Set Up

  Auto Tuning
  Programme Sorting
  Progamme Labels
  AV Preset
  Manual Programme Preset
  Detail Set Up

OK

Teletext is an information service transmitted by some TV stations. The index page of the

 

teletext service (usually page 100) gives you information on how to use the service. To

 

operate teletext, use the remote control buttons as indicated below.

Teletext errors may occur if you use a channel (TV Broadcast) with a weak signal.

After selecting the TV channel which carries the teletext service you wish 
to view, press 

. 

Input 3 digits for the page number, using the numbered buttons.
• If you make a mistake, retype the correct page number.
•  If the counter on the screen continues searching, it is because the page is not available. If this is the

Press PROG + (

) or PROG -  (

).

Whilst you are viewing teletext, press 

. Press it again to cancel teletext mode. 

Press 

/

. Press it again to cancel the freeze. 

Press 

/

. Press it again to conceal the information. 

A teletext page may consist of several sub pages. In this case the page number that appears 
on the upper left corner will change from white to green and one or more arrows will appear 
next to the page number. Repeatedly press the

 or

 buttons on the remote control to 

watch the desired sub page.

Press .

Fastext/TOPtext service lets you access Teletext pages with one button push.
When you are in Teletext mode and Fastext/TOPtext is broadcast, a colour coded menu 

appears at the bottom of the teletext page. Press the appropriate coloured button (red, 
green, yellow  or blue) to access the page corresponding to your menu choice.

Index
Programme
News
Sport
Weather

25

153
101

98

Index
Programme
News
Sport
Weather

25

153
101

98

Index
Programme
News
Sport
Weather

25

153
101

98

Index
Programme
News
Sport
Weather

25

153
101

98

Index
Programme
News
Sport
Weather

25

153
101

98

Index
Programme
News
Sport
Weather

25

153
101

98

Index
Programme
News
Sport
Weather

25

153
101

98

Index
Programme
News
Sport
Weather

25

153
101

98

In it’s default condition this remote control will operate the basic functions of this Sony TV, Sony 
DVDs and most Sony VCRs. To control VCRs and DVDs of other manufacturers (and some Sony 
VCR models), please complete the following steps:

•Before you start, look up the 3 digit code for your brand of DVD or VCR from the list 

below. On those brands that have more than one code, enter the first code number.

•Sony will endeavour to update the software according to market changes. 

Therefore, please refer to the code table included with the remote control for 
the latest code set.

Press the Media Selector button on the remote control repeatedly until the 
required green light (VCR or DVD) is lit.

   If Media Selector is on TV position, code numbers will not be stored.

Before the green light goes out, press and hold the yellow button for 
approximately 6 seconds until the green light starts flashing.

Whilst the green light is flashing, enter all three digits of the code for your 
brand of VCR or DVD using the number buttons on the remote control. 

 If your selected code is entered correctly, all three green lights will be lit   

  momentarily.

Turn on your VCR or DVD and check that the main functions work.

• If your device is not working or some of the functions do not work 

please check that you entered the correct code set or try the next code 
listed against the brand. 

• Your brand codes may be lost if weak batteries are not replaced within 

a few minutes. To reset your brand of DVD or VCR please repeat the 
above steps. A small label is added inside the battery door to allow you 
to record your brand codes.

• Not all brands are covered and not all models of every brand may be covered.

SONY (VHS)

301, 302, 303, 308, 309

SONY

001

SONY (BETA)

303, 307, 310

AIWA

021

SONY (DV)

304, 305, 306

DENON

018, 027, 020, 002

AIWA

325, 331, 351

GRUNDIG

009, 028, 023, 024, 016, 003

AKAI

326, 329, 330

HITACHI

025, 026, 015, 004

DAEWOO

342, 343

JVC

006, 017

GRUNDIG

358, 355, 360, 361, 320, 351

KENWOOD

008

HITACHI

327, 333, 334

LG

015, 014

JVC

314, 315, 322, 344, 352, 353, 

LOEWE

009, 028, 023, 024, 016, 003

354, 348, 349

MATSUI

013, 016

LG

332, 338

ONKYO

022

LOEWE

358, 355, 360, 361, 320, 351

PANASONIC

018, 027, 020, 002

MATSUI

356, 357

PHILIPS

009, 028, 023, 024, 016, 003

ORION

328

PIONEER

004

PANASONIC

321, 323

SAMSUNG

011, 014

PHILIPS

311, 312, 313, 316, 317, 318, 

SANYO

007

358, 359

SHARP

019, 027

SAMSUNG

339, 340, 341, 345

THOMSON

012

SANYO

335, 336

TOSHIBA

003

SHARP

324

YAMAHA

018, 027, 020, 002

THOMSON

319, 350

TOSHIBA

337

TV system: 
B 

Colour system:
PAL
SECAM, NTSC 3.58, 4.43 (only Video 
In)

Channel Coverage:
VHF: C00-C05, C05A, C06-C09, C09A,

C10-C12

UHF: C20-C69
CABLE: S02-S44

Picture Tube:
Flat Display FD Trinitron  WIDE:
32” (approx. 82 cm. measured 
diagonally)

/

21-pin Scart connector

 including 

audio/video

input, YUV input, TV 
audio/video output.

/

  21-pin Scart connector 

including audio / video 
input, YUV input, 
monitor audio/video 
output.

 

/

  21-pin Scart connector 

including audio / video 
input, S video input, 
selectable audio / video 
output.

audio outputs (Left/
Right) - phono jacks 

S

 

S Video input – 4 pin DIN

   video input – phono jack

   audio input – phono jacks

         

headphones jack 

2 x 20 W (music power)
2 x 10 W (RMS)

Power Consumption:
130 W

Standby Power Consumption:
0.3 W 

Dimensions (w x h x d) :
approx. 892 x 565 x 584 mm.

Weight:
approx. 62.2 Kg.

Accessories supplied:
1 Remote Control (RM-934)
2 Batteries (IEC designated)
1 Scart adaptor
2 Scart cables

Other features:
• 100 Hz picture, Digital Plus.
• Teletext, Fastext, TOPtext (250 page TEXT
 memory).
• Sleep Timer.
• Dolby Virtual.
• BBE.
• PIP.
• Auto Format.

S

 

Here are some simple solutions to problems which may affect the picture and sound.

If you continue to experience problems, have your TV serviced by qualified personnel.

 

Never open the casing yourself.

No picture (screen is dark) and no 

sound.

Poor or no picture (screen is dark), but 

good sound.

No picture or no menu information 

from equipment connected to the Scart 

connector.

Good picture, no sound.

No colour on colour programmes.

Distorted picture.

Distorted picture when changing 

programmes or selecting teletext.

Picture slanted.

Noisy picture when viewing a TV 

channel.

No unscrambling or unstable picture 

whilst viewing a scrambled channel 

with a decoder connected directly to 

the Scart connector 

/

.

Top bent picture when viewing a VCR

Remote control does not function.

The standby indicator  

 on the TV 

flashes.  

S

• Check the aerial connection.

• Plug the TV in and press the 

 button on the front of

 the TV. 

• If the standby indicator 

 is on, press TV 

 button on

  the remote control. 

• Using the menu system, select the “Picture 

Adjustment” menu and select “Reset” to return to the

 factory settings.

• Check that the optional equipment is on and press the

   

 button repeatedly on the remote control until the

  correct input symbol is displayed on the screen. 

• Press the 

 + button on the remote control. 

• Check that “TV Speakers” is “On” in the “Detail Set Up”

 menu.

• Check that headphones are not connected.

• Using the menu system, select the “Picture Adjustment”

menu and select “Reset” to return to factory settings.

• Check that you have not connected at the same time

equipment to the connectors 

A and B (see illustration on

page 18).

• Check that you have not connected at the same time

equipment to 

   and   (see illustration on page 18).

• Turn off any equipment connected to the Scart

  connector on the rear of the TV.

• Using the menu system, select the “Picture Rotation”

  option in the “Detail Set Up” menu to correct the

 picture slant.

• Using the menu system, select the “Manual 

Programme Preset” menu and adjust Fine Tuning

  (AFT) to obtain better picture reception.

• Using the menu system, select the “Noise Reduction”

  option in the “Detail Set Up” menu and select

  “Auto” to reduce the noise in the picture.

• Using the menu system, select the “Set Up” menu. Then 

enter to “Detail Set Up” option and set “AV3 Output” to 

“TV”.

• Connect VCR only by tuning to programme number “0” 

(see page 13) or via any “AV input” (see page 18).

• Check that the Media Selector on the remote control is set  

to the device you are using (VCR, TV or DVD).

• If the remote control does not operate the VCR or DVD 

even when the Media Selector has been set correctly. Enter 

the necessary code set as explained on “Remote Control 

Configuration for VCR/DVD” chapter of this instruction 

manual.

• Replace the batteries.

• Contact your nearest Sony service centre.

Remove the rear cover fixing screws indicated. Take care
when removing the rear cover not to damage the speaker
cables [Disconnect the speaker connector] as speakers are
fitted inside the rear cover.

To remove lift the main bracket rear slightly and slide the
chassis away from the beznet. Ensure that the interconnecting
leads are released from their purse locks to prevent damage
being caused.

When refitting the chassis ensure that the main bracket is
located in the beznet guide slots before sliding the chassis
forwards. Refit the interconnecting leads in their respective
purse locks.

Before completely removing the rear cover disconnect the
speaker connector which is located on the inside.

<=

<=