DOWNLOAD Sony KV-32LS65AUS (serv.man4) Service Manual ↓ Size: 3.88 MB | Pages: 32 in PDF or view online for FREE

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
F

 

 

 

11 

 

 

 
 
 

 

12 

 

 

 

13 

 

 

• Integrated Video Matrix switch  

– Up to 7 CVBS inputs and up to 2 Y/C inputs 
–  Up to three CVBS outputs (even Y/C input) 

 

• Multi-Standard colour decoder with 4H COMB FILTER 

– PAL/NTSC/SECAM -> Automatic recognition of chroma standard 
– 2 Colour Decoder: Main Channel + Picture in Picture 
–  2D COMB FILTER in the Main Channel. 

 

• Detection embedded circuits: 

– Global motion and global still detection 
– Film mode and phase detection (PAL, NTSC; 2-2, 3-2 pull down) 
–Measurement of the noise level during the vertical retrace  

(blanking) for both channels 

–  Detection of letter box formats 

 

• Noise reduction: 

– Automatic measurement of the noise level 
– Motion adaptive temporal noise reduction 
– Intelligent Frame-based temporal noise reduction for luminance 

and chrominance, depending on both noise measured and motion 
detected pixel by pixel 

– Separate motion detection and noise measurement in both Master 

Channel (Main Picture) and Slave Channel (PIP) 

 
 
 

• Scan-rate-conversion: 

– Motion adaptive frame based 100/120Hz interlaced scan 

conversion. 

– Special treatment for film material (‘Inverse 3-2 pull down’) 
– Large area flicker and line flicker reduction. 
– Simple Interlaced Modes (100/120Hz): 

a) ABAB, if still picture (avoiding line flicker) 
b) AA’B’B, if moving picture (avoiding artefacts) 
c) AAAA or BBBB, for Teletext (avoiding line flicker) 
d) Sharpness improvement 

– Digital colour transition improvement (DCTI) 
– Digital luminance transition improvement (DLTI) 
–  Adaptive horizontal and vertical PEAKING (luminance) 

 

• Three D/A converters: 

– 9 bit amplitude resolution for Y, -(R-Y), -(B-Y) output

 

 
Figure 3.2 shows the block diagram of VSP9407 while Figure 3.3 
shows its pinning diagram. 
 
 
 

14