DOWNLOAD Sony KV-28FQ70B Service Manual ↓ Size: 36.2 MB | Pages: 78 in PDF or view online for FREE

continued...

MANUAL PROGRAMME PRESET
The “Manual Programme Preset” option in the 
“Set Up” menu allows you to:

 Preset channels or the VCR channel one by 

one to the programme order of your choice. 
To do this:

1 After selecting the ”Manual Programme 

Preset” option, press

 then with 

 option highlighted press

. 

Press

or

to select which programme 

number you want to preset the channel on 
(for VCR, select programme number “0”). 
Then press

.

2 After selecting the Channel option, press 

. Then press the number buttons to enter 

directly the channel number of the TV Broadcast or the channel of the VCR signal. If you 
do not know the channel number, press

or

to search for it. When you have tuned 

the desired channel, press OK twice to store.

Label a channel using up to five characters.

To do this: Highlighting the Programme option, press the PROG +/- button to select the 

programme number with the channel you wish to name. When the programme you want to 
name appears on the screen, select the Label option and press

. Next press

o

r

to 

select a letter, number or “-“ for a blank. Press 

to confirm this character. Select the other 

four characters in the same way. After selecting all the characters, press OK twice to store.

Fine tune the broadcast reception. Normally the automatic fine tuning (AFT) will give the 

best possible picture, however you can manually fine tune the TV to obtain a better picture 
reception in case the picture is distorted.

To do this: while watching the channel (TV Broadcast) you wish to fine tune, select the AFT 

option and press

. Next press

 

or

to adjust the fine tuning between -15 and +15. 

Finally press OK twice to store.

 Skip any unwanted programme numbers when they are selected with the PROG +/- 

buttons.

To do this: Highlighting the Programme option, press the PROG +/- button to select the 

programme number you want to skip. When the programme you want to skip

appears on the screen, select the Skip option and press 

. Next press

or

to select  

. Finally press OK twice to confirm and store.

Picture Adjustment

Select:

Enter Menu:

Picture Mode
  Contrast
  Brightness
  Colour
  Sharpness
     Reset
Noise Reduction

Personal

AUTO

Set Up

Auto Tuning
Programme Sorting
Select NexTView
AV Preset
Manual Set Up

Select:

Enter Menu:

Set Up

Auto Tuning
Programme Sorting
Select NexTView
AV Preset
Manual Set Up

Select:

Enter Menu:

Set Up

Language
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Detail Set Up

Select:

Enter Menu:

Enter:

Set Up

Select:

Language
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Detail Set Up

Teletext is an information service transmitted by most TV stations. The index page of the

 

teletext service (usually page 100) gives you information on how to use the service. To

 

operate teletext, use the remote control buttons as indicated below.

Teletext errors may occur if you use a channel (TV Broadcast) with a weak signal.

After selecting the TV channel which carries the teletext service you wish 
to view, press 

. 

Input 3 digits for the page number, using the numbered buttons.
• If you make a mistake, retype the correct page number.
•  If the counter on the screen continues searching, it is because the page is not available. If this is the

Press PROG + (

) or PROG - (

).

Whilst you are viewing teletext, press 

. Press it again to cancel teletext mode. 

Press 

/

. Press it again to cancel the freeze. 

Press 

/

. Press it again to conceal the information. 

A teletext page may consist of several sub pages. In this case the page number that appears 
on the upper left corner will change from white to green and one or more arrows will appear 
next to the page number. Repeatedly press the

 or

 buttons on the remote control to 

watch the desired sub page.

Press 

.

Fastext service lets you access Teletext pages with one button push.
When you are in Teletext mode and Fastext is broadcast, a colour coded menu appears at

 

the bottom of the teletext page. Press the appropriate coloured button (red, green, yellow

 

or blue) to access the page corresponding to your menu choice.

Index
Programme
News
Sport
Weather

25

153
101

98

Index
Programme
News
Sport
Weather

25

153
101

98

Index
Programme
News
Sport
Weather

25

153
101

98

Index
Programme
News
Sport
Weather

25

153
101

98

Index
Programme
News
Sport
Weather

25

153
101

98

Index
Programme
News
Sport
Weather

25

153
101

98

Index
Programme
News
Sport
Weather

25

153
101

98

TELETEXT

Index
Programme
News
Sport
Weather

25

153
101

98

In it’s default condition this remote control will operate the basic functions of this Sony TV, Sony 
DVDs and most Sony VCRs. To control VCRs and DVDs of other manufacturers (and some Sony 
VCR models), please complete the following steps:

Before you start, look up the 3 digit code for your brand of DVD or VCR from the list 

below. On those brands that have more than one code, enter the first code number.

Press the Media Selector button on the remote control repeatedly until the 
required green light (VCR or DVD) is lit.

   If Media Selector is on TV position, code numbers will not be stored.

Before the green light goes out, press and hold the yellow button for 
approximately 6 seconds until the green light starts flashing.

Whilst the green light is flashing, enter all three digits of the code for your 
brand of VCR or DVD using the number buttons on the remote control. 

 If your selected code is entered correctly, all three green lights will be lit   

  momentarily.

Turn on your VCR or DVD and check that the main functions work.

• If your device is not working or some of the functions do not work 

please check that you entered the correct code set or try the next code 
listed against the brand. 

• Your brand codes may be lost if weak batteries are not replaced within 

a few minutes. To reset your brand of DVD or VCR please repeat the 
above steps. A small label is added inside the battery door to allow you 
to record your brand codes.

• Not all brands are covered and not all models of every brand may be 

covered.

SONY (VHS)

301, 302, 303, 308, 309

SONY

001

SONY (BETA)

303, 307, 310

AIWA

021

SONY (DV)

304, 305, 306

DENON

018, 027, 020, 002

AIWA

325, 331, 351

GRUNDIG

009, 028, 023, 024, 016, 003

AKAI

326, 329, 330

HITACHI

025, 026, 015, 004

DAEWOO

342, 343

JVC

006, 017

GRUNDIG

358, 355, 360, 361, 320, 351

KENWOOD

008

HITACHI

327, 333, 334

LG

015, 014

JVC

314, 315, 322, 344, 352, 353, 

LOEWE

009, 028, 023, 024, 016, 003

354, 348, 349

MATSUI

013, 016

LG

332, 338

ONKYO

022

LOEWE

358, 355, 360, 361, 320, 351

PANASONIC

018, 027, 020, 002

MATSUI

356, 357

PHILIPS

009, 028, 023, 024, 016, 003

ORION

328

PIONEER

004

PANASONIC

321, 323

SAMSUNG

011, 014

PHILIPS

311, 312, 313, 316, 317, 318, 

SANYO

007

358, 359

SHARP

019, 027

SAMSUNG

339, 340, 341, 345

THOMSON

012

SANYO

335, 336

TOSHIBA

003

SHARP

324

YAMAHA

018, 027, 020, 002

THOMSON

319, 350

TOSHIBA

337

  (SMARTLINK)

TV system: 
I 

Colour system:
PAL
SECAM, NTSC 3.58, 4.43 (only 
Video In)

Channel Coverage:
I: UHF B21-B69

Picture Tube:
Flat Display FD Trinitron  
WIDE: 
• KV-28FQ70U: 28” (approx. 

71 cm mesaured diagonally).

• KV-32FQ70U: 32” (approx. 

82 cm mesaured diagonally).

/

21-pin scart

 

connector 

(CENELEC standard)

  including audio/video  

input, RGB input, TV 
audio/video output.

/

  21-pin Scart

 

connector 

(CENELEC standard)

  including audio / video 

input, RGB input, monitor 
audio/video output.

 

/

  21-pin Scart

 

connector

 

(CENELEC 

standard) including 
audio / video input, S video 
input, selectable 
audio / video output and 
Smartlink interface.

     audio outputs (Left/
     Right) - phono jacks 

S Video input – 4 pin 
DIN

   video input – phono 

jack

   audio input – phono 

jacks

       

headphones jack 

2 x 20 W (music power)
2 x 10 W (RMS)

Woofer:
30 W (music power)
15 W (RMS)

Power Consumption:
• KV-28FQ70U: 125 W
• KV-32FQ70U: 130 W

Standby Power 
Consumption:
0.3 W 

Dimensions (w x h x d) :
• KV-28FQ70U: approx. 

789 x 

533 x 521 mm.

• KV-32FQ70U: approx. 

910 x 586 x 586 mm.

• KV-28FQ70U: 

approx. 46.5 Kg.

• KV-32FQ70U: 

approx. 64 Kg.

Accessories supplied:
1 Remote Control (RM-938)
2 Batteries (IEC designated,

AA size) 

Other features:
• 100 Hz picture, Digital Plus.
• Teletext, Fastext, TOPtext 

(250 page TEXT  memory).

• Sleep Timer.
• SmartLink (direct link 

between your TV set and a 
compatible VCR. For more 
information on SmartLink, 
please refer to the 
Instruction Manual of your 
VCR).

• Dolby Virtual.
• BBE Digital.
• PIP.
• Auto Format.
• ACI (Auto Channel
  Installation).

S

S

 

 

Here are some simple solutions to problems which may affect the picture and sound.

No picture (screen is dark) 
and no sound.

Poor or no picture (screen is 
dark), but good sound.

No picture or no menu 
information from equipment 
connected to the Scart 
connector.

Good picture, no sound.

No colour on colour 
programmes.

When you switch on the TV 
the last channel you were 
watching before switching 
the TV off does not appear.

Distorted picture when 
changing programmes or 
selecting teletext.

Wrong characters appear 
when viewing NexTView.

• Check the aerial connection.
• Plug the TV in and press the 

 button on the front of the TV. 

• If the standby indicator 

 is on, press TV 

 button on

  the remote control. 

• Using the menu system, select the “Picture Adjustment” 

menu and select “Reset” to return to the factory settings (see 
page 9).

• Check that the optional equipment is on and press the
   

 button repeatedly on the remote control until the

  correct input symbol is displayed on the screen (see page 21).

• Press the  

 + button on the remote control. 

• Check that “TV Speakers” is “On” in the “Sound Adjustment” 

menu (see page 10).

• Check that headphones are not connected.

• Using the menu system, select the “Picture Adjustment” 

menu and select “Reset” to return to factory settings (see 
page 9).

• This is not a malfunction. Press the number buttons on the 

remote control to select the desired channel.

• Turn off any equipment connected to the Scart connector on 

the rear of the TV.

• Use the menu system to enter the “Language” menu (see page 

13) and select the same language that NexTView is broadcast 
in.

continued...

Picture slanted

Noisy picture when viewing 
a TV channel.

Remote control does not 
function.

The standby indicator 

 on 

the TV flashes.  

• Using the menu system, select the “Picture Rotation” option 

in the “Detail Set Up” menu to correct the picture slant (see 
page 16).

• Using the menu system, select the “Manual Programme 

Preset” menu and adjust Fine Tuning (AFT) to obtain better 
picture reception (see page 15).

• Using the menu system, select the “Noise Reduction” option 

in the “Picture Adjustment” menu and select “Auto” to 
reduce the noise in the picture (see page 19).

• Check that the Media Selector on the remote control is set  to 

the device you are using (VCR, TV or DVD).

• If the remote control does not operate the VCR or DVD even 

when the Media Selector has been set correctly. Enter the 
necessary code set as explained in the “Remote Control 
Configuration for VCR/DVD” chapter of this instruction 
manual (see page 22).

• Replace the batteries.

• Contact your nearest Sony service centre.

Before completely removing the rear cover disconnect the
speaker connector which is located on the inside of the set.

To remove lift the main bracket rear slightly and slide the
chassis away from the beznet. Ensure that the interconnecting
leads are released from their purse locks to prevent damage
being caused.

When refitting the chassis ensure that the main bracket is
located in the beznet guide slots before sliding the chassis
forwards. Refit the inter-connecting leads in their respective
purse locks.

Remove the rear cover fixing screws indicated and pull the
rear cover backwards away from the set.