DOWNLOAD Sony KV-28FC60 Service Manual ↓ Size: 19.87 MB | Pages: 89 in PDF or view online for FREE

13

Using the menu Further Programme Preset you can

a) individually adjust the volume level of each channel.

b) improve the quality of a weak channel  (picture or sound distortions) with

manual fine tuning.

c) preset the AV output for programme positions of those channels with

scrambled signals (e.g. from a Pay TV decoder). In this way a connected
Smartlink VCR records the unscrambled signal.

Press MENU. Select the symbol 

 using 

$. Push to ” to enter.

Select Installation using 

$. Push to ” to enter. Select Further Programme Preset

using 

$. Push to ” to enter.

Select the programme position of the desired channel by pushing to 

4 or $.

Push repeatedly to 

” to select:

VOL (Volume Offset), AFT (Automatic Fine Tuning) or DECODER.
The selected item changes colour.

VOL
Push to 

4 or $ to adjust the volume level (range -7 to +7) of the channel.

Store by pressing OK.
Repeat steps 3 and 4a if you wish to adjust the volume level of other channels.

AFT
Push to 

4 or $ to fine tune the channel (range -15 to +15). Store by pressing OK.

Repeat steps 3 and 4b if you wish to fine tune other channels.

DECODER
Push to 

4 or $ to select AV1 (Euro AV socket 1) or AV2 (Euro AV socket 2) as

output for the video source on this programme position. Store by pressing OK.
Repeat steps 3 and 4c if you wish to preset the AV output of other video sources.

Should you use Auto Tuning afterwards, this setting will
be cancelled.

Press MENU to return to the normal TV screen.

Installation

Select:

Enter:

Language/Country
Manual Programme Preset

Further Programme Preset

RGB Set Up
Picture Rotation
Speaker Configuration
Personal ID

O

- - - - - - -

Further Programme Preset

Select:

Enter:

PROG

AFT

VOL

DECODER

On
On
On

Off
Off
Off

0
0
0

 

1

 2
 3
 4
 5
 6
 7
 8
 9
10
11

Internal

PROG

AFT

VOL

DECODER

 

1

0

PROG

AFT

VOL

DECODER

 

1

 

-5

On

PROG

AFT

VOL

DECODER

 

1

 

-5

 

On

Off

AV1

AV2

When connecting an RGB source such as a Sony playstation you may need to
readjust the picture geometry.

Select the connected RGB source 

… 1 by pressing … repeatedly.

Press MENU. Select the symbol 

 using 

$. Push to ” to enter.

Select Installation using 

$. Push to ” to enter. Select RGB Set Up using $.

Push to 

” to enter.

Select H Centre by pushing to 

”. Adjust the centre of the picture

(range from -10 to +10) using 

4 or $. Store by pressing OK.

Select H Size using 

$. Push to ” to enter. Adjust the horizontal coordinates

(range from -10 to +10) using 

4 or $. Store by pressing OK.

Press MENU to return to the normal TV screen.

RGB Set Up

Adjust Size:

Confirm: OK

H Centre

O

H Size

O

RGB Set Up

Adjust Position:

Confirm: OK

H Centre

O

H Size

O

Smartlink is a direct link between your TV set and a VCR.

For Smartlink you need:

A VCR which supports Smartlink, NexTView Link, Easy Link or Megalogic.

A fully-wired 21-pin SCART cable to connect your VCR to Scart 

Y

2/

j

2

connector.

The features of Smartlink are:

Tuning information such as the channel overview are downloaded from
the TV set to the VCR.

With NexTView you can programme your VCR easily.

Direct TV recording: While watching TV you just need to press just one button
on the VCR to record this programme.

For more information on Smartlink please refer to the Instruction Manual of
your VCR.

Using the buttons underneath the cover of the remote control you can
control other Sony equipment.

Open the cover of the remote control.

Set the selector VTR 1234 DVD according to the equipment you want to control:
VTR 1

Beta VCR

VTR 2

8 mm VCR

VTR 3

VHS VCR

VTR 4

Digital Video (DCR-VX 1000/9000 E, VHR-1000)

DVD

Digital Video Disk

Use the buttons on the remote control to operate the equipment.

If your video equipment has a COMMAND MODE selector, set this
selector to the same position as the VTR 1234 DVD selector on the
TV remote control.

If the equipment does not have a certain function, the corresponding
button on the remote control does not work.

14

Most TV channels broadcast information via teletext. The index page of the teletext
service (usually page 100) gives you information on how to use the service.

Please use a TV channel with a strong signal, otherwise there may be
Teletext errors.

216-02

01

03

04

05

06

07

08

02

Select the TV channel which carries the teletext service you want to view.

Press the 

 button once on your remote control to switch Teletext on.

Press 

 again for Mix mode.

The TV broadcast and the Teletext display are overlapped.

Press 

;

 or press 

 a third time to switch teletext off.

Input the three digits of the page number using the number buttons on your remote
control.

If you have made a mistake:
Type in any three digits, then re-enter the correct page number.

Using the number buttons on the remote control, select a teletext page which
has several page numbers on it (e.g. the index page).

Press the OK button.
Page Catching is displayed.

Select the desired page number using 

4 or $ then press the OK button.

The requested page is displayed after some seconds.

•

Press 

 (Page +) or 

 (Page -).

•

Press 

+

;

.

A teletext page may consist of several subpages. In this case an information line
is displayed, showing the number of subpages.

•

Select the mode by pushing to 

4. Select the subpage by using 4 or $.

Press 

 to freeze the Teletext page.

Press 

 to resume normal teletext reception.

*depending on availability of service

Fastext lets you access pages with one button stroke. When Fastext is broadcast,
a colour-coded menu appears at the bottom of the screen. The colours of this
menu correspond to the red, green, yellow and blue buttons on the remote
control.

•

Press the coloured button which corresponds to the colour in the
colour-coded menu.

This TV set has a menu-guided teletext system. When teletext is switched on
you can use the joystick buttons to operate the teletext menu.

Select the menu functions as follows:

Press the MENU button on the remote control to display the Teletext menu.

Select the teletext function using 

4 or $.  Push to ” to enter.

For convenient reading of a Teletext page you can enlarge it.
After having selected the function, a sub menu Top 

4 Bottom $ Full OK

is displayed.

•

Push to 

4 to enlarge the upper half of the screen, push to $ to enlarge the lower

half. Press OK to resume the normal size. Press 

 to resume the normal

Teletext operation.

After having selected the function, you can watch a TV channel while waiting
for a requested Teletext page. As soon as the page is available, the symbol 
changes colour.

•

Press 

 to view the page.

Some teletext pages contain hidden information (e.g., for a quiz), which you can
reveal.
After having selected the function, the hidden information appears.

•

Press 

 to resume the normal Teletext operation.

*depending on availability of service

You can call up a time-coded page - such as an alarm page - at a time specified
by you.

After having selected the function a sub menu is displayed.

Select On using 

4 or $. Push to ” to enter.

Enter the three digits of the desired page using the number buttons.

Enter the four digits of the desired time using the number buttons.

Press OK to store.
The time is displayed in the top left-hand corner of the screen.
At the requested time the page is displayed.

Teletext

Top / Bottom / Full

Text Clear

Reveal

Time  Page

Select:

Enter Menu:

Top:

Bottom:

Full: OK

Time  Page

PAGE

TIME

Select:

Enter:

– – –

- - : - -

15

B/G/H, D/K, I, L

PAL, SECAM, NTSC 3.58/4.43 (via Video In)

See Channel Guide on next page

FD Trinitron

KV-28FC60/28FC60-Z
Approx. 71 cm (28 inches)
Approx. 66 cm picture measured diagonally
102

°

 deflection

KV-32FC60/32FC60-Z
Approx. 82 cm (32 inches)
Approx. 76 cm picture measured diagonally
102

°

 deflection

Y

1/

1: 21-pin scart connector

input of audio/video or RGB signals
output of TV signals

Y

2/

j

2:21-pin scart connector

input of audio/video or S-video signals
selectable output of audio/video signals

Y

3/

j

3:21-pin scart connector

input of audio/video or S-video signals
output of audio/video signals (monitor out)

|

 L/G/S/I     RCA-connectors,

R/D/D/D  variable output for audio signals

External speaker terminals:2-pin DIN (2)
q 3 : 4-pin DIN
input of S-video signals

…3 Phono jack
input of video signals

≤

3 Phono jacks

input of audio signals

2

 Headphones jack - stereo minijack

Right and left speaker
2 x 25W (music power),
2 x 15W (RMS)

KV-28FC60/28FC60-Z: 132 W

KV-32FC60/32FC60-Z: 130 W

KV-28FC60/32FC60-Z
772(w) x 497(h) x 533(d) mm
KV-32FC60/32FC60-Z
867(w) x 564(h) x 558(d) mm

KV-28FC60/28FC60-Z
Approx. 42.5 kg
KV-32FC60/32FC60-Z
Approx. 65 kg

1 Remote Control RM-892

2 Batteries
1 Instruction Manual

Flat display Trinitron tube, digital
noise reduction, 100 Hz picture,
graphic equaliser, personal ID,
sleep timer, NexTView, NICAM
stereo, Digital Comb Filter

Here are some simple solutions to problems which may affect the picture and sound.

No picture (screen is dark), no sound

• Plug the TV in.

• Press 

U on the TV. (If u indicator is on, press 

;

 , PROGR+/-

or one of the  numbered buttons on the remote control.)

• Check the aerial connection.

• Check if the selected video source is on.

• Turn the TV off for 3 or 4 seconds and then turn it on again using 

U .

Poor or no picture (screen is dark),

• Press MENU. Select  

  and adjust Brightness, Contrast

but good sound

and Colour.

Good picture, but poor or no sound

• Press 

¸ + .

• If 

¤

 is displayed on the screen, press 

¤

 button.

No colour for colour programmes

• Open the cover of the remote control. Press 

? button.

Remote control does not function

• Replace the batteries.

Control Panel does not function

• Make sure Parental lock is Off.

Note: As with some other electrical appliances under certain circumstances there is potential for small electrostatic

discharge to occur.

If you continue to have problems, have your TV serviced by qualified personnel. Never open the casing yourself.

B/G/H

E2 .. 12, 21 .. 69

C02 C03 C04 .. C12 C21 .. C69

TV Cable (1)

S1 .. 41

S01 S02 .. S41

TV Cable (2)

S01 .. S05, M1 .. M10, U1 .. U10

S42 .. S46 S01 .. S10 S11 .. S20

Italy

A B C D E F G H H1 H2, 21 .. 69

C13 C14 C15 C16 C17 C18 C19 C20 C11 C12, C21-C69

D/K

R01 .. R12, R21 .. R69

C01 .. C12 C21 .. C69

TV Cable (1)

S01 S02 .. S41

TV Cable (2)

S42 S43 .. S46

TV Cable

B .. Q*, S21 .. F41

S02, S03 .. S17, S21 .. S41

L

F2 .. F10 F21 .. F69

C01 .. C12, C21 .. C69

I

B21 .. B68

C21 .. C68

* If channels B..Q are available, the display S02-S17 will appear on the screen.

16

Remove the rear cover fixing screws indicated. Take care
when removing the rear cover not to damage the speaker
cables [Disconnect the speaker connector] as speakers are
fitted inside the rear cover.

To remove lift the main bracket rear slightly and slide the
chassis away from the beznet. Ensure that the interconnecting
leads are released from their purse locks to prevent damage
being caused.

When refitting the chassis ensure that the main
bracket is located in the beznet guide slots before
sliding the chassis forwards. Refit the
interconnecting leads in their respective purse locks.

Before completely removing the rear cover disconnect the
speaker connector.