DOWNLOAD Sony KV-28DS60U Service Manual ↓ Size: 17.41 MB | Pages: 105 in PDF or view online for FREE

9

Press the MENU button on the remote control to display
the menu on the TV screen.

Move the OK button on the remote control DOWN to
select the 

 symbol on the menu screen then move

RIGHT to enter the `PRESET' menu.

Move the OK button DOWN to select “Programme
Setup” then move RIGHT to enter the `PROGRAMME
SETUP' menu.

Move the OK button RIGHT to highlight the brackets
then move repeatedly DOWN to select `Digital' if you
wish to view digital channels or `Analogue' if you wish
to view analogue channels.

Press the OK button to confirm then move LEFT to
display the PRESET menu.

Move the OK button UP to select `Auto
Programme' then move the OK button RIGHT to display
the “AUTO PROGRAMME” menu.

Press the OK button to start the automatic tuning
process.  The word `searching' now flashes on the menu
screen and the TV starts to store all available channels.
As the TV is searching, the bottom right corner of the
menu screen displays its progress.  Please be patient and
do not press any buttons.

When the autotune procedure is complete, the PRESET
menu appears on the screen and the channel currently
being broadcast on programme 1 is displayed.

Press the MENU button to remove the `PRESET' menu
from the TV screen.   You can now view the channels by
pressing the PROGR+/- or the numbered buttons on the
remote control.

• If you wish to stop the “Autotune” procedure,

press the OK button then the MENU button on
the remote control.

• If, after tuning is complete, no digital

programme is displayed on the TV, repeat steps
1-9 but select `Analogue' in the Programme
Setup menu screen.  When digital programmes
become available in your area, repeat steps 1-9
above and select `Digital' in the Programme
Setup menu screen.

You need to tune the TV to receive channels. By following the instructions below, this TV will
automatically search and store all available channels for you.  If at any time when using this
menu you want to return to the normal TV picture, press the MENU button.

CONTROL

+

–

PROGR

–

+

Programme Up (+) or Down
(-) buttons.  After pressing
the CONTROL button on the
top of the TV set, press to
select TV channels.

Volume control buttons. After
pressing the CONTROL button
on the top of the TV set, press to
increase (+)/decrease (-) volume.

Video input button.
After pressing the
CONTROL button
on the top of the TV
set, press to select
the input signals
from VCR etc.

On/Off Switch.
Press to switch TV
on/off.

CONTROL button.
Press to activate
and illuminate the
control panel.

The operating instructions mentioned here are partial abstracts
from the Operating Manual. The page numbers of the Operating

Instruction Manual remain as in the manual.

10

Press to mute TV sound. Press again to
restore the sound.

Press numbered buttons to select channels.

For double-digit programme numbers, e.g. 23,

press  -/-- first, then the buttons 2 and 3.

If you enter an incorrect first digit, this should

be corrected by entering another digit (0 - 9)

and then selecting -/-- button again to enter
the programme number of your choice.

Press to change the sound settings.

Press again to remove the display.

Press to adjust the volume of the TV.

Press to temporarily switch off TV.  Press again

to switch on TV from standby mode.

completely when TV is not in use.
NOTE: After 15 -30 minutes without a TV signal

and without any button being pressed, the TV
switches automatically into standby mode.

Press to reveal all on-screen indications.

Press again to cancel.

Press to select channels.

Press to change the size of the screen.

Press to change the picture settings.
Press again to remove the display.

Press to display the Event Schedule Guide.
Press again to remove display.

Press to select Teletext mode.

Press to return to the normal operation

from teletext mode or standby mode.

Press to temporarily switch off VCR (if Sony VCR connected).

Press again to switch on VCR.

Press to return to the previous channel you were

watching.  Note:  This can be done only after

watching the present channel for 5 seconds.

Use this OK button to select options

available in the menu system of the TV.

Open the remote control lid and
press to display the time on screen.

Open the remote control lid and press these

buttons to operate your video equipment
(please refer to your VCR manual).

With this selector you can control other Sony

equipment.  Open the remote control lid and

set the selector according to the type of

equipment you want to control then use the

buttons on the remote control to operate the

equipment:

VTR1 : Sony Beta VCR

VTR2 : Sony 8mm VCR

VTR3 : Sony VHS VCR

VTR4 : Sony Digital VCR

MDP : Sony Multi Disc Player

Open the remote control lid and

press to return picture and
sound levels to factory settings.

Press to freeze the picture.

Press again to cancel freeze.

Press to select inputs from the TV sockets (see

Using Optional Equipment section).

In teletext mode, press to freeze the displayed

page. Press once again to cancel.

To Display the Menu
Press if you wish to use the TV menu system.  Press

again to remove the menu from the TV screen.

Press the MENU button on the remote control to display
the menu on the TV screen.

Move the OK button on the remote control DOWN to
select the 

 symbol on the menu screen then move

RIGHT to enter the `PRESET' menu.

Move the OK button DOWN to select “Programme
Setup” then move RIGHT to enter the `PROGRAMME
SETUP' menu.

Move the OK button RIGHT to highlight the brackets
then move repeatedly DOWN to select `Digital' if you
wish to view digital channels or `Analogue' if you wish
to view analogue channels.

Press the OK button to confirm your selection.

 You can now view the channels by pressing the
PROGR+/- or the numbered buttons on the
remote control.

 Press the OK button on the remote control to display the
programme table on the TV screen.

 Push the joystick UP or DOWN to select `Digital/
Analogue' then move RIGHT to enter your option.

Move the joystick UP or DOWN to select `Digital' if you
wish to view digital channels or `Analogue' if you wish
to view analogue channels.

You have the option to view either digital channels or analogue channels.

11

Press the MENU button on the remote control to display
the menu on the TV screen.

Move the OK button on the remote control DOWN to
select the   symbol on the TV screen then move RIGHT
to display the `PICTURE  CONTROL' menu on the TV
screen.

Move the OK button UP or DOWN to select the item on
the screen you wish to adjust.  For a description of the
menu items and their effects, see the following table.

Move the OK button RIGHT to highlight the settings.

Adjust the setting  by moving the OK button UP,
DOWN, LEFT or RIGHT.

As soon as you have adjusted the item, press the OK
button to confirm.

Repeat steps 3 to 6 to adjust the other items.

Press the MENU button to remove the display from the
TV screen.

Although the picture is adjusted at the factory, you can modify it to suit your own taste.

Picture Mode

Select between the following sound
settings

Personal (for individual settings)
Movie (for films)
Live (for live broadcasts)

Contrast

 Less

More

Brightness*

 Darker

Brighter

Colour*

 Less

More

Hue**

 Greenish

Reddish

Sharpness*

 Softer

Sharper

Reset

Resets picture to factory preset levels

AI (Artificial Intelligence)

Off:normal
On:rautomatic optimization of
contrast level according to the TV
signal.

Noise Reduction

Off:normal
On:reduces picture noise in case of
a weak broadcast signal.

100Hz Mode

1:Normal
2:LFR (Line Flicker Reduction) off

*   Only if “Personal“ is selected in `Picture Mode`.
** Available for NTSC colour system only.

You can quickly change the Picture Mode or the Equalizer Mode
without entering the `PICTURE CONTROL` or `SOUND CONTROL`
menu screens.

1 Press the * symbol on the remote control for picture modes or the *

symbol for equalizer modes.

2 Move the OK button on the remote control UP or DOWN to

select the desired mode.

3 Press * or * again to remove the display from the TV screen.

. . . . . . .

Press the MENU button on the remote control to display
the menu on the TV screen.

Move the OK button on the remote control DOWN to
select the   symbol on the TV screen then move RIGHT
to enter the `SOUND CONTROL' menu on the TV
screen.

Move the OK button UP or DOWN to select the item on
the screen you wish to adjust.  For a description of the
menu items and their effects, see the following table.

Move the OK button RIGHT to highlight the settings.

Adjust the setting  by moving the OK button UP,
DOWN, LEFT or RIGHT.

As soon as you have adjusted the item, press the OK
button to confirm.

Repeat steps 3 to 6 to adjust the other items.

Press the MENU button to remove the display from the
TV screen.

Although the sound is adjusted at the factory, you can modify it to suit your own taste.

Equalizer Mode

Select between the following sound settings

Personal
Vocal
Jazz
Rock
Pop
Flat (fixed setting, cannot be adjusted)

Equalizer adjustment

You can adjust the mode selected in Equaliser
mode by cutting and boosting the  5 selected
frequency bands. Only the changes made in
Personal can be stored, the others return to
factory setting.  Select the desired bar by
moving the OK button UP, DOWN, LEFT or
RIGHT then press the OK button to confirm.

Surround Mode

Off
Hall
Pro Logic

*Hall Effect

Stadium
Hall
Church
Disco

Dual Sound

• For a bilingual broadcast:

A for channel 1

  B for channel 2

• For a stereo broadcast:

Stereo

Mono

**Auto Volume Control

$

On: volume level of the channels will stay
the same independent of the broadcast
signal (e.g. in case of advertisements)

4

Off: volume level changes according to
the broadcast signal

Headphones

2

 Volume

Less 

More

2

 Dual Sound

• For a bilingual broadcast:

A for channel 1

B for channel 2

• For a stereo broadcast:

Stereo

Mono

*   Only if “Hall“ is selected in Surround Mode.
** Only if Surround Mode  is switched to “off“

. . . . . . .

12

Before listening to Dolby Surround sound, you can adapt the Dolby features to suit your own
taste. It is normal to set up the levels and modes of the speakers only when installing the TV
and the speakers or when changing the position of the speakers.

. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .

 1 Press the MENU button on the remote control to display the

menu on the TV screen.

 2 Move the OK button on the remote control DOWN to select the

  symbol on the TV screen then move to RIGHT to confirm.

 3 Move the OK button DOWN to select `Installation` then move

 the OK button RIGHT to enter.

 4 Move the OK button DOWN to select `Dolby ProLogic Setup`

then move RIGHT to enter.

 5 Select `Level Settings` by moving the OK button UP or DOWN.

Move the OK button to RIGHT to enter.

 6 Select Left (left speaker), Centre (centre speaker), Right (right

speaker) or Surround (surround speakers)by moving the OK

button DOWN then move the OK button RIGHT to confirm.

 7 Adjust the level by moving the OK button RIGHT or LEFT.
 8 After you have adjusted the level, press the OK button to

confirm.

 9 Repeat steps 6 to 8 if you wish to adjust the sound levels of the

other speakers  (from your sitting position the sound output

from all speakers should balance).

10 Move the OK button LEFT.
11 Select `Speaker mode` by moving the OK button DOWN then

move the OK button RIGHT to enter.

12 Push the OK button repeatedly DOWN to select:

Normal

–

all speakers are activated

3 Wide

–

surround speakers are not used, centre

speaker carries full frequency response

3 Normal –

surround speakers are not used

Wide

–

wider bandwidth for centre speaker

Phantom –

centre speaker is not used

Normal

–

all speakers are activated

Press the OK button to confirm your choice.

13 Select 'Delay Time' by moving the OK button DOWN then

move to RIGHT to confirm.  Adjust the delay time of the surround

speakers by moving the OK button UP or DOWN  (e.g 20 ms

for standard rooms, 30 ms for small rooms)

15 ms 

n

 20 ms 

n

 25 ms 

n

 30 ms

Press the OK button to confirm your choice.

14 Select 'Auto Surround' by moving the OK button DOWN then

move to RIGHT to confirm

. 

Move the OK button DOWN  to

select:

On -

When receiving a Dolby Surround encoded

programme, the TV switches automatically to Dolby

Surround sound (depending on availability of service

by broadcaster).

Off -

normal

Press the OK button to confirm your choice.

15 Press the MENU button on the remote control to remove the

menu from the TV screen.

1 Press the MENU button on the remote control to display

the menu on the TV screen.

2 Move the OK button on the remote control RIGHT to

select `Screen Mode', then move to RIGHT to select the
brackets.  Move the OK button repeatedly UP or DOWN
to select one of the following modes:

•

smart - imitation of wide screen effect (16:9) for 4:3
broadcasts.

•

wide - for 16:9 broadcasts

•

zoom - imitation of wide screen effect (16:9) for
movies broadcast in cinemascopic format.

In zoom mode and 14:9 mode the top and bottom of
the picture are cut off. Using `Screen position' you
can move the screen up- or downwards in order to
see the cut-off parts (e.g. to read subtitles). Move the
OK button DOWN to select `Screen Position' then
move to RIGHT to confirm.  Move the OK button UP
or DOWN to adjust the screen position (-4 to +4).

Press the OK button to confirm.

•

14 :9 - compromise between 4:3 and 16:9 format

•

4:3 - conventional 4:3 picture

3 Press the OK button to confirm the selection.

4 Strobe Mode

Move the OK button DOWN to select `Strobe'. Press the
OK button to confirm. The TV picture is now displayed
image by image, creating a slow motion effect. Move the
OK button UP or DOWN to select the speed of the
motion. Press the OK button to cancel the strobe mode.

5 Auto 16:9

Move the OK button DOWN to select `Auto 16:9' then
move RIGHT to confirm.
Move the OK button DOWN to select `On' for automatic
selection of format or  `Off' for normal mode.  Press OK
button to confirm.

6 Correction (only for Auto 16:9)

In case of automatic format detection there are two
possibilities for 4:3/14:9 signals:  Set Correction to `on' if
you wish Smart mode to appear on the screen or set it to
`off' if you prefer 4:3/14:9 mode. Move the OK button
DOWN to select `Correction' then move RIGHT to
confirm. Move the OK button DOWN to select `On' or
`Off'. Press OK button to confirm.

7 Press the MENU button to remove the menu from the TV

screen.

Using this Screen Mode feature you can change the aspect ratio of the screen or reproduce the
main picture image by image (Strobe function).

Smart

Wide

Zoom

14:9

4:3