Sony KV-28CL10B Service Manual ▷ View online
- 9 -
AUTO FORMAT
The “Auto Format” option in the “Detail Set
Up” menu allows you to automatically change
the aspect ratio of the screen.
The “Auto Format” option in the “Detail Set
Up” menu allows you to automatically change
the aspect ratio of the screen.
To do this: after selecting the option, press
.
Then press
or
to select On (if you wish
the TV set to automatically switch the screen
format according to the broadcast signal) or Off
(if you wish to keep your preference). Finally
press OK to store.
format according to the broadcast signal) or Off
(if you wish to keep your preference). Finally
press OK to store.
Even if you have selected “On” or “Off” in the “Auto Format” option,
you can always modify the format of the screen by pressing
you can always modify the format of the screen by pressing
repeatedly on the remote control to select one of the following formats:
Smart:
Imitation of wide screen effect for 4:3 broadcast.
4:3:
Conventional 4:3 picture size, full picture information.
14:9:
Compromise between 4:3 and 16:9 picture size.
Zoom:
Widescreen format for letterbox movies.
Wide:
For 16:9 broadcast. Full picture information.
In “Smart”, “Zoom” and “14:9” modes, parts of the top and
bottom of the screen are cut off. Press
bottom of the screen are cut off. Press
or
to adjust the
position of the image on the screen (e.g. to read subtitles).
NOISE REDUCTION
The “Noise Reduction” option in the “Detail Set
Up” menu allows you to automatically reduce
the picture noise visible in the broasdcast signal.
The “Noise Reduction” option in the “Detail Set
Up” menu allows you to automatically reduce
the picture noise visible in the broasdcast signal.
To do this: after selecting the option, press
.
Then press
or
to select Auto. Finally
press OK to confirm and store.
To cancel this function afterwards, select “Off”
instead of “Auto” in the step above.
instead of “Auto” in the step above.
Level 1
Level 2
Level 3 / Function
continued...
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Detail Set Up
Auto Format
Noise Reduction:
AV2 Output:
RGB Centring:
Picture Rotation:
Noise Reduction:
AV2 Output:
RGB Centring:
Picture Rotation:
On
Auto
TV
0
0
Auto
TV
0
0
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Detail Set Up
Auto Format:
Noise Reduction:
AV2 Output:
RGB Centring:
Picture Rotation:
Noise Reduction:
AV2 Output:
RGB Centring:
Picture Rotation:
On
Auto
TV
0
0
Auto
TV
0
0
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
4:3
Zoom
14:9
Wide
Smart
MANUAL PROGRAMME PRESET
The “Manual Programme Preset” option in the
“Set Up” menu allows you to:
The “Manual Programme Preset” option in the
“Set Up” menu allows you to:
a)
Preset channels or a video input source one by one to the programme order of your choice.
To do this:
1 After selecting the ”Manual Programme Preset” option, press
To do this:
1 After selecting the ”Manual Programme Preset” option, press
then with Programme
option highlighted press
. Press
or
to select on which programme number you
want to preset the channel (for VCR, select programme number “0”). Then press
.
2
The following option is only available depending on the country you have selected
in the “Language/Country” menu.
in the “Language/Country” menu.
After selecting the System option, press
. Then press
or
to select the TV Broadcast
system (B/G for western European countries, D/K for eastern European countries, L for
France or I for United Kingdom). Then press
France or I for United Kingdom). Then press
.
3
After selecting the Channel option, press
. Then press
or
to select the channel
tuning (“C” for terrestrial channels or “S” for cable channels). Next press
. After that,
press the number buttons to enter directly the channel number of the TV Broadcast or the
channel of the VCR signal. If you do not know the channel number, press
channel of the VCR signal. If you do not know the channel number, press
or
to search
for it. When you have tuned the desired channel, press OK twice to store.
Repeat all the above steps to tune and store more channels.
Repeat all the above steps to tune and store more channels.
b)
Label a channel using up to five characters.
To do this: Highlighting the Programme option, press the PROGR +/- button to select the
programme number with the channel you wish to name. When the programme you want to
name appears on the screen, select the Label option and press
programme number with the channel you wish to name. When the programme you want to
name appears on the screen, select the Label option and press
. Next press
o
r
to
select a letter, number or “-“ for a blank. Press
to confirm this character. Select the other
four characters in the same way. After selecting all the characters, press OK twice to store.
c)
Normally the automatic fine tuning (AFT) is operating, however you can manually fine tune
the TV to obtain a better picture reception in the case that the picture is distorted.
To do this: while watching the channel (TV Broadcast) you wish to fine tune, select the AFT
option and press
the TV to obtain a better picture reception in the case that the picture is distorted.
To do this: while watching the channel (TV Broadcast) you wish to fine tune, select the AFT
option and press
. Next press
or
to adjust the fine tuning between -15 and +15.
Finally press OK twice to store.
d)
Skip any unwanted programme numbers when they are selected with the PROGR +/-
buttons.
To do this: Highlighting the Programme option, press the PROGR +/- button to select the
programme number you want to skip. When the programme you want to skip appears on
the screen, select the Skip option and press
programme number you want to skip. When the programme you want to skip appears on
the screen, select the Skip option and press
. Next press
or
to select Yes. Finally
press OK twice to confirm and store.
To cancel this function afterwards, select “No” instead of “Yes” in the step above.
To cancel this function afterwards, select “No” instead of “Yes” in the step above.
e)
View and record correctly scrambled channels when using a decoder connected directly to
the Scart
:
2/
or through a VCR.
This option is only available depending on the country you have selected in the “Language/
Country” menu.
To do this: select the Decoder option and press
Country” menu.
To do this: select the Decoder option and press
. Next press
or
to select On. Finally
press OK twice to confirm and store.
To cancel this function afterwards, select “Off” instead of “On” in the step above.
To cancel this function afterwards, select “Off” instead of “On” in the step above.
S
Level 1
Level 2
Level 3 / Function
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
- 10 -
Teletext
Teletext is an information service transmitted by most TV stations. The index page of the
teletext service (usually page 100) gives you information on how to use the service. To
operate teletext, use the remote control buttons as indicated below.
teletext service (usually page 100) gives you information on how to use the service. To
operate teletext, use the remote control buttons as indicated below.
Make sure to use a channel (TV Broadcast) with a strong signal, otherwise teletext errors
may occur.
may occur.
To Switch On Teletext :
After selecting the TV channel which carries the teletext service you wish
to view, press
to view, press
.
To Select a Teletext page:
Input 3 digits for the page number, using the numbered buttons.
• If you have made a mistake, retype the correct page number.
• If the counter on the screen continues searching, it is because this page is not available. In that case,
• If you have made a mistake, retype the correct page number.
• If the counter on the screen continues searching, it is because this page is not available. In that case,
input another page number
To access the next or preceding page:
Press PROGR + (
) or PROGR - (
).
To superimpose teletext on to the TV:
Whilst you are viewing teletext, press
. Press it again to cancel teletext mode.
To freeze a teletext page:
Some teletext pages have sub-pages which follow on automatically. To stop them, press
/
. Press it again to cancel the freeze.
To reveal concealed information (e.g: answer to a quiz):
Press
/
. Press it again to conceal the information.
To Switch Off Teletext:
Press .
Fastext
Fastext service lets you access pages with one button push.
While you are in Teletext mode and Fastext is broadcast, a colour coded menu appears at
While you are in Teletext mode and Fastext is broadcast, a colour coded menu appears at
the bottom of the teletext page. Press the colour button (red, green, yellow or blue) to
access the corresponding page.
TELETEXT
Index
Programme
News
Sport
Weather
News
Sport
Weather
25
153
101
101
98
TELETEXT
Index
Programme
News
Sport
Weather
News
Sport
Weather
25
153
101
101
98
TELETEXT
Index
Programme
News
Sport
Weather
News
Sport
Weather
25
153
101
101
98
TELETEXT
Index
Programme
News
Sport
Weather
News
Sport
Weather
25
153
101
101
98
TELETEXT
Index
Programme
News
Sport
Weather
News
Sport
Weather
25
153
101
101
98
TELETEXT
Index
Programme
News
Sport
Weather
News
Sport
Weather
25
153
101
101
98
TELETEXT
Index
Programme
News
Sport
Weather
News
Sport
Weather
25
153
101
101
98
TELETEXT
Index
Programme
News
Sport
Weather
News
Sport
Weather
25
153
101
101
98
AV2 OUTPUT
The “AV2 Output” option in the “Detail Set
Up” menu allows you to select the source to be
output from the Scart connector
The “AV2 Output” option in the “Detail Set
Up” menu allows you to select the source to be
output from the Scart connector
:2/q
in
order you can record from this Scart any signal
coming from the TV or from external
equipment connected to the Scart connector
coming from the TV or from external
equipment connected to the Scart connector
:1/
or front connectors
3 and
3.
If your VCR supports SmartLink, this
procedure is not necessary.
procedure is not necessary.
To do this: after selecting the option, press
.
Then press
or
to select the desired
output signal: TV, AV1, AV3 or AUTO.
If you select “AUTO”, the output signal
will always be the same one that is
displayed on the screen.
will always be the same one that is
displayed on the screen.
If you have connected a decoder to the
Scart
Scart
:2/q
or to a VCR connected to
this Scart, please remember to change back
the “AV2 Output” to “AUTO” or “TV” for
correct unscrambling.
the “AV2 Output” to “AUTO” or “TV” for
correct unscrambling.
RGB CENTRING
When connecting an RGB source, such as a
“PlayStation”, you may need to readjust the
horizontal position of the picture. In that case,
you can readjust it through the “RGB Centring”
option in the “Detail Set Up”.
When connecting an RGB source, such as a
“PlayStation”, you may need to readjust the
horizontal position of the picture. In that case,
you can readjust it through the “RGB Centring”
option in the “Detail Set Up”.
To do this: while watching an RGB source select
the “RGB Centring” option and press
the “RGB Centring” option and press
. Then
press
or
to adjust the centre of the
picture between –10 and +10. Finally press OK
to confirm and store.
to confirm and store.
PICTURE ROTATION
Because of the earth’s magnetism, the picture
may slant. In this case, you can correct the
picture slant by using the option “Picture
Rotation” in the “Detail Set Up” menu.
Because of the earth’s magnetism, the picture
may slant. In this case, you can correct the
picture slant by using the option “Picture
Rotation” in the “Detail Set Up” menu.
To do this: after selecting the option, press
.
Then press
or
to correct any slant of the
picture between -5 and +5 and finally press OK
to store.
to store.
Level 1
Level 2
Level 3 / Function
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Detail Set Up
Auto Format:
Noise Reduction:
AV2 Output:
RGB Centring:
Picture Rotation:
Noise Reduction:
AV2 Output:
RGB Centring:
Picture Rotation:
On
Auto
TV
0
0
Auto
TV
0
0
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Detail Set Up
Auto Format:
Noise Reduction:
AV2 Output:
RGB Centring:
Picture Rotation:
Noise Reduction:
AV2 Output:
RGB Centring:
Picture Rotation:
On
Auto
TV
0
0
Auto
TV
0
0
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Detail Set Up
Auto Format:
Noise Reduction:
AV2 Output:
RGB Centring:
Picture Rotation:
Noise Reduction:
AV2 Output:
RGB Centring:
Picture Rotation:
On
Auto
TV
0
0
Auto
TV
0
0
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
- 11 -
Using Optional Equipment
1
Connect your equipment to the designated TV socket, as indicated in the previous page.
2
Switch on the connected equipment.
3
To watch the picture of the connected equipment, press the
button repeatedly until the
correct input symbol appears on the screen.
Symbol
Input Signals
1
• Audio / video input signal through the Scart connector
C.
• RGB input signal through the Scart connector
C. This symbol appears only
if a RGB source has been connected.
2
• Audio / video input signal through the Scart connector
D.
2
• S Video input signal through the Scart connector
D.
3
• Video input signal through the phono socket
A and Audio input signal
through
B.
4
Press
button on the remote control to return to the normal TV picture.
For Mono Equipment
Connect the phono plug to the L/G/S/I socket on the front of the TV and select
Connect the phono plug to the L/G/S/I socket on the front of the TV and select
3 input
signal using the instructions above. Finally, refer to the “Sound Adjustment” section of this
manual and select “Dual Sound” “A” on the sound menu screen (see page 11).
manual and select “Dual Sound” “A” on the sound menu screen (see page 11).
S
Connecting Optional Equipment
Using the following instructions you can connect a wide range of optional equipment to
your TV set. (Connecting cables are not supplied).
Connecting a VCR:
To connect a VCR, please refer to the section “Connecting the aerial and VCR” of this instruction
manual. We recommend you connect your VCR using a scart lead. If you do not have a scart
lead, tune in the VCR test signal to the TV programme number “0” by using the “Manual
Programme Preset” option. (for details of how to manually programme these presets, see page
14, step a).
Refer to your VCR instruction manual to find out how to find the output channel of your VCR.
manual. We recommend you connect your VCR using a scart lead. If you do not have a scart
lead, tune in the VCR test signal to the TV programme number “0” by using the “Manual
Programme Preset” option. (for details of how to manually programme these presets, see page
14, step a).
Refer to your VCR instruction manual to find out how to find the output channel of your VCR.
Connecting a VCR that supports SmartLink:
SmartLink is a direct link between the TV set and the VCR. For more information on
SmartLink, please refer to the instruction manual of your VCR.
If you use a VCR that supports SmartLink, please connect the VCR by using a Scart lead
to the Scart
SmartLink, please refer to the instruction manual of your VCR.
If you use a VCR that supports SmartLink, please connect the VCR by using a Scart lead
to the Scart
:2/q
D.
If you have connected a decoder to the Scart
:2/q
or through a VCR
connected to this Scart:
Select the “Manual Programme Preset” option in the “Set Up” menu and after entering in the
“Decoder**” option, select “On” (by using
“Decoder**” option, select “On” (by using
or
). Repeat this option for each scrambling
signal.
**This option is only available depending on the country you have selected in the
“Language/Country” menu.
“Language/Country” menu.
continued...
A
B
1
2
D
“PlayStation”*
Decoder
Decoder
C
VCR
DVD
VCR
DVD
8mm/Hi8/
DVC
camcorder
VCR
When you connect the
headphones, the TV
speakers will automatically
be muted.
headphones, the TV
speakers will automatically
be muted.
* “PlayStation”
is a product of
Sony Computer
Entertainment, Inc.
Entertainment, Inc.
*
“PlayStation” is a trademark
of Sony Computer
Entertainment, Inc.
Entertainment, Inc.
- 12 -
Troubleshooting
Here are some simple solutions to the problems which may affect the picture and sound.
Problem
No picture (screen is dark) and no
sound.
sound.
Poor or no picture (screen is dark),
but good sound.
but good sound.
No picture or no menu information
from equipment connected to the
Scart connector.
from equipment connected to the
Scart connector.
Good picture, no sound.
No colour on colour programmes.
Distorted picture when changing
programmes or selecting teletext.
programmes or selecting teletext.
Wrong characters appear when
viewing teletext.
viewing teletext.
Picture slanted
Noisy picture when viewing a TV
channel.
channel.
No unscrambled picture whilst
viewing un unscrambled channel
with a decoder connected through
the Scart connector
viewing un unscrambled channel
with a decoder connected through
the Scart connector
:2/q
.
Remote control does not function.
The standby indicator
on the TV
flashes.
Solution
• Check the aerial connection.
• Plug the TV in and press the
• Plug the TV in and press the
button on the front of
the TV.
• If the standby indicator
• If the standby indicator
is on, press
button on
the remote control.
• Using the menu system, select the “Picture
Adjustment” menu and select “Reset” to return to the
factory settings (see page 10).
• Check that the optional equipment is on and press the
button repeatedly on the remote control until the
correct input symbol is displayed on the screen (see
page 19).
• Press the
+ button on the remote control.
• Check that “TV Speakers” is “On” on the “Sound
Adjustment” menu (see page 11).
•
Check that headphones are not connected.
• Using the menu system, select the “Picture
Adjustment” menu and select “Reset” to return to
factory settings (see page 10).
factory settings (see page 10).
• Turn off any equipment connected to the Scart
connector on the rear of the TV.
connector on the rear of the TV.
• Using the menu system, enter to the “Language/
Country” (see page 12) menu and select the country in
which you operate the TV set. For Cyrillic languages,
we recommend selecting Russia country if your own
country does not appear in the list.
which you operate the TV set. For Cyrillic languages,
we recommend selecting Russia country if your own
country does not appear in the list.
• Using the menu system, select the “Picture Rotation”
option in the “Detail Set Up” menu to correct the
picture slant (see page 16).
option in the “Detail Set Up” menu to correct the
picture slant (see page 16).
• Using the menu system, select the “Manual
Programme Preset” menu and adjust Fine Tuning
(AFT) to obtain better picture reception (see page 14).
• Using the menu system, select the “Noise Reduction”
option in the “Detail Set Up” menu and select
“Auto” to reduce the noise in the picture (see page 15).
• Using the menu system, select the “Noise Reduction”
option in the “Detail Set Up” menu and select
“Auto” to reduce the noise in the picture (see page 15).
• Using the menu system, select the “Set Up” menu.
Then enter to “Detail Set Up” option and set “AV2
Output” to “TV” (see page 15).
Output” to “TV” (see page 15).
• Replace the batteries.
• Contact your nearest Sony service centre.
If you continue to experience problems, have your TV serviced by qualified personnel.
Never open the casing yourself.
Specifications
TV system:
Depending on your country selection:
B/G/H, D/K, L, I
Depending on your country selection:
B/G/H, D/K, L, I
Colour system:
PAL, SECAM
NTSC 3.58, 4.43 (only Video In)
PAL, SECAM
NTSC 3.58, 4.43 (only Video In)
Channel Coverage:
VHF: E2-E12
UHF: E21-E69
CATV: S1-S20
HYPER: S21-S41
D/K: R1-R12,
VHF: E2-E12
UHF: E21-E69
CATV: S1-S20
HYPER: S21-S41
D/K: R1-R12,
R21-R69
L:
F2-F10, B-Q, F21-F69
I:
UHF B21-B69
Picture Tube:
Flat Display FD Trinitron WIDE
28” (approx. 71 cm. measured
diagonally)
Flat Display FD Trinitron WIDE
28” (approx. 71 cm. measured
diagonally)
Rear Terminals
:1/
21-pin scart connector
(CENELEC
standard)
including
audio/video
input, RGB input, TV
audio/video output.
audio/video output.
:2/q
21-pin Scart connector
(SMARTLINK) (CENELEC standard)
including audio / video
input, S video input,
selectable audio / video
output and SmartLink
interface.
Front Terminals
…3 video input – phono jack
…3 video input – phono jack
3 audio input – phono jacks
headphones jack
headphones jack
Design and specifications are subject to change without notice.
Ecological Paper- Totally Chlorine Free
Sound Output:
2 x 10 W (music power)
2 x 5 W (RMS)
2 x 10 W (music power)
2 x 5 W (RMS)
Power Consumption:
90 W
90 W
Standby Power Consumption:
0.5 W
0.5 W
Dimensions (w x h x d) :
Approx. 788 x 517 x 523 mm.
Approx. 788 x 517 x 523 mm.
Weight:
Approx. 41.5 Kg.
Approx. 41.5 Kg.
Accessories supplied:
1 Remote Control (RM-946)
2 Batteries (IEC designated)
1 Remote Control (RM-946)
2 Batteries (IEC designated)
Other features:
• Teletext, Fastext, TOPtext.
• Sleep Timer.
• SmartLink (direct link between your TV set
and a compatible VCR. For more
• Teletext, Fastext, TOPtext.
• Sleep Timer.
• SmartLink (direct link between your TV set
and a compatible VCR. For more
information on SmartLink, please refer to
the Instruction Manual of your VCR).
• TV system Autodetection.
• Auto Format.
• TV system Autodetection.
• Auto Format.
Click on the first or last page to see other KV-28CL10B service manuals if exist.