DOWNLOAD Sony KV-27FS210 Service Manual ↓ Size: 9.95 MB | Pages: 127 in PDF or view online for FREE

Use this connection if you subscribe to a cable system that scrambles some channels (pay 
channels), but not all of them. This setup allows you to use the remote control to:

❏

change channels through your cable box or VCR when you are receiving a 
scrambled signal

❏

change channels through your TV 

This connection also allows you to use the PIP feature when you are viewing unscrambled 
channels coming directly into your TV from your cable. Scrambled signals coming through the 
cable box cannot be viewed in PIP. For more information on the PIP feature, see page 24.

Connect the single input jack of the splitter to your incoming cable connection.

Using coaxial cables (not supplied), connect the two output jacks of the splitter to:

a) the IN jack on your cable box

b) the VHF/UHF jack on the TV

Using a coaxial cable (not supplied), connect the OUT jack on your cable box to the IN jack 
on your VCR.

If your VCR is equipped with video outputs, you can get better picture quality by 
connecting audio/video cables (not supplied) from AUDIO/VIDEO OUT on your VCR to 
AUDIO/VIDEO IN on your TV.

✍

DIGITAL CABLE BOX USERS: If you are connecting a digital cable box, you will need a special bi-
directional splitter that is designed to work with your digital cable box.

1

3

4

5

01US01COV-BR2.book  Page 15  Friday, February 28, 2003  5:11 PM

❏

For better picture quality, use S VIDEO instead of the yellow video cable. S VIDEO does 
not provide sound, so you still must connect the audio cables.

❏

Program your Sony remote control to operate your VCR or cable box (see page 5).

❏

To activate your remote, press 

 to operate your VCR or 

 to operate your cable 

box. To do this, first program your remote control, then use the Channel Fix feature to set 
your TV to channel 3 or 4 (see page 31).

❏

Press 

 repeatedly to switch between VCR input (VIDEO input), VHF/UHF  (local 

channels or unscrambled), or cable box (cable system or scrambled channels).

✍

DIGITAL CABLE BOX USERS: Do not use this connection. The TO CONVERTER jack is not compatible 
with digital boxes.

01US01COV-BR2.book  Page 16  Friday, February 28, 2003  5:11 PM

Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver.

Connect the coaxial cable from your cable service or antenna to the VHF/UHF jack on 
your TV.

Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your satellite 
receiver to AUDIO/VIDEO IN on your TV.

This connection allows you to do the following:

❏

Program your Sony remote control to operate your satellite receiver (see page 5).

❏

To activate your remote, press 

 to operate your satellite receiver. See page 7 on how 

to operate other functions.

❏

Press 

 repeatedly to switch to satellite receiver input (VIDEO input).

1

3

4

5

01US01COV-BR2.book  Page 17  Friday, February 28, 2003  5:11 PM

Connect the coaxial cable from your satellite antenna to SATELLITE IN on the satellite 
receiver.

Connect the coaxial cable from your cable service or antenna to the IN jack on your VCR.

Using a coaxial cable (not supplied), connect the OUT jack on your VCR to the VHF/UHF 
jack on your TV.

Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your satellite 
receiver to AUDIO/VIDEO IN on your VCR.

Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your VCR to 
AUDIO/VIDEO IN on your TV.

This connection allows you to do the following:

❏

Program your Sony remote control to operate your VCR or satellite receiver (see page 5).

❏

Turn on your VCR to enable your satellite receiver to work with this connection.

❏

To activate your remote, press 

 to operate your VCR or 

 to operate your satellite 

receiver.

❏

Press 

 repeatedly to switch between VCR input (VIDEO input), VHF/UHF  

(local channels or unscrambled), or your cable box (cable system or scrambled channels). 

✍

To view from the satellite receiver or VCR, select the video input to which your satellite receiver or 
VCR is connected by pressing 

 on the remote control.

1

3

4

5

01US01COV-BR2.book  Page 18  Friday, February 28, 2003  5:11 PM