Sony KP-ER43M31 / KP-ER43M61 / KP-ER43M90 / KP-ER43M91 / KP-ER53M31 / KP-ER53M61 / KP-ER53M90 / KP-ER53M91 Service Manual ▷ View online
5
Using Y
our New Pr
ojection TV
Using Your New Projection TV
S
KP ER53/43 M90/M91/M61/M31 (GB/FR/CT/CS/PR/AR) 4 087 601 21(1)
Y
C
B
/
B-Y
C
R
/
R-Y
R
L
R
L
30W MAX 16
1
2
3
3
#
C –
VIDEO
VIDEO IN
VIDEO OUT
AUDIO
R L
Using Your New Projection TV
: Signal flow
IEC connector
(not supplied)
(not supplied)
or
Antenna cable (not supplied)
Antenna cable (not supplied)
Rear of
projection TV
projection TV
To video and
audio outputs
audio outputs
To S video
output
output
Audio/Video cable
(not supplied)
(not supplied)
S video cable
(not supplied)
(not supplied)
: Signal flow
To
(S video input)
(S video input)
VCR
Antenna cable (not supplied)
To antenna
output
output
To 8 (antenna)
Rear of
projection TV
projection TV
To t 1, 2 or 3 (video input)
(yellow)
-L (MONO) (white)
-R (red)
continued
Getting Started
Step 1
Connect the antenna
If you wish to connect a VCR, see the “Connecting a VCR” diagram below.
CAUTION
Do not connect the power cord until all other connections are
complete; otherwise, a minimal current leakage through the antenna
and/or other terminals to the ground could occur.
Do not connect the power cord until all other connections are
complete; otherwise, a minimal current leakage through the antenna
and/or other terminals to the ground could occur.
Connecting a VCR
To play a video tape, press t (see page 14).
6
Using Your New Projection TV
Sony KP ER53/43 M90/M91/M61/M31 (GB/FR/CT/CS/PR/AR) 4 087 601 21(1)
1
AU TO PROGRAM
0 1
T V S Y S : AU TO
VH F L OW
PR :
ENTER
Getting Started (continued)
2
1
Notes
• If you connect a monaural VCR, connect the yellow plug to
• If you connect a monaural VCR, connect the yellow plug to
(the yellow
jack) and the black plug to -L (MONO) (the white jack).
• If you connect a VCR to the 8 (antenna) terminal, preset the signal
output from the VCR to the program number 0 on the projection TV.
• When both the
(S video input) and t 1 (video input) are connected,
the
(S video input) is automatically selected. To view the video input
to t 1 (video input), disconnect the S video cable.
Step 2
Insert the batteries into
the remote
the remote
Notes
• Do not use old batteries or different types of batteries together.
• To operate some of the functions of your projection TV, you may have to
• Do not use old batteries or different types of batteries together.
• To operate some of the functions of your projection TV, you may have to
open the remote control cover.
Step 3
Preset the channels automatically
7
Using Y
our New Pr
ojection TV
Using Your New Projection TV
S
KP ER53/43 M90/M91/M61/M31 (GB/FR/CT/CS/PR/AR) 4 087 601 21(1)
R
ENTER
Notes
• To stop the automatic channel presetting, press MENU twice.
• If your projection TV has preset an unwanted channel or cannot preset a
• To stop the automatic channel presetting, press MENU twice.
• If your projection TV has preset an unwanted channel or cannot preset a
particular channel, then preset your projection TV manually (see page 44).
Step 4
Adjusting the convergence automatically
Note
• Adjust convergence about 20 – 30 minutes after the projection TV is first
• Adjust convergence about 20 – 30 minutes after the projection TV is first
turned on.
The Digital Quick Focus feature allows you to adjust the convergence
automatically.
The Digital Quick Focus feature allows you to adjust the convergence
automatically.
Automatic convergence adjustment modes
DRC1250
DRC100
Wide-mode DRC1250
Antenna input signal
a
a
–
Video input signal
a
a
a (NTSC only)
If the colors do not converge when the above signal is switched,
perform the automatic convergence adjustment again.
perform the automatic convergence adjustment again.
8
Using Your New Projection TV
Sony KP ER53/43 M90/M91/M61/M31 (GB/FR/CT/CS/PR/AR) 4 087 601 21(1)
Connecting optional components
You can connect optional audio/video components, such as a VCR, multi disc player,
camcorder, video game, or stereo system. To watch and operate the connected
equipment, see pages 14 and 28.
camcorder, video game, or stereo system. To watch and operate the connected
equipment, see pages 14 and 28.
Connecting a camcorder/video game equipment
using the t (video input) jacks
using the t (video input) jacks
Notes
• When connecting video game equipment, display the “FEATURE” menu
• When connecting video game equipment, display the “FEATURE” menu
and select “ON” for “GAME MODE” to adjust the picture setting that is
suitable for video games (see page 39).
suitable for video games (see page 39).
• You can also connect video equipment to the t 1, 2, or 3 (video input)
jacks at the rear of your projection TV.
• When both the
(S video input) and t 4 (video input) are connected,
the
(S video input) is automatically selected. To view the video input
to t 4 (video input), disconnect the S video cable.
L(MONO)
R
4
: Signal flow
To S video
output
output
Camcorder
Video game
equipment
equipment
To video and
audio outputs
audio outputs
To
(S video input)
(S video input)
To
t
4
(video input)
or
Audio/Video cable (not supplied)
S video cable (not supplied)
Click on the first or last page to see other KP-ER43M31 / KP-ER43M61 / KP-ER43M90 / KP-ER43M91 / KP-ER53M31 / KP-ER53M61 / KP-ER53M90 / KP-ER53M91 service manuals if exist.