Sony KP-48V85 / KP-53V85 / KP-61V85 Service Manual ▷ View online
– 13 –
KP-48V85/53V85/61V85
RM-Y905
RM-Y905 RM-Y905
14
Installing and Connecting the Projection TV (continued)
Connecting a camcorder
Use this connection to view a picture directly
from your camcorder.
1
Using AUDIO and S VIDEO* cables,
connect AUDIO and S VIDEO OUT on
the camcorder to AUDIO and S VIDEO
IN inside the drop-down panel on the
front of the projection TV (White-AUDIO
Left, Red-AUDIO Right**).
connect AUDIO and S VIDEO OUT on
the camcorder to AUDIO and S VIDEO
IN inside the drop-down panel on the
front of the projection TV (White-AUDIO
Left, Red-AUDIO Right**).
2
Press VIDEO 2 to select the video inputs
from a camcorder.
* If your camcorder is not equipped with S
VIDEO, use a VIDEO cable (yellow) instead of
the S VIDEO cable.
the S VIDEO cable.
** If you are connecting a monaural camcorder,
connect only the single audio output to the left
(MONO) input on the projection TV.
(MONO) input on the projection TV.
Disconnect all power sources before making any connections.
(Front of projection TV)
Camcorder
Audio/
video
outputs
video
outputs
VIDEO
VMC-810S/820S
(not supplied)
(not supplied)
AUDIO-L
AUDIO-R
AUDIO-R
S VIDEO
VIDEO
L
(MONO)
R
AUDIO
VIDEO 2 INPUT
YC-15V/30V (not supplied)
S VIDEO
S VIDEO
OUT
OUT
15
Disconnect all power sources before making any connections.
(Rear of projectionTV)
Indicates direction
of signal
of signal
Connecting two VCRs for tape
editing
editing
By connecting a second VCR to MONITOR
OUT, you can record a program being played
by the primary VCR to the second VCR or
perform tape editing and dubbing.
OUT, you can record a program being played
by the primary VCR to the second VCR or
perform tape editing and dubbing.
1
Connect the VCR intended for playback
using the connection instructions on page
6 of this manual.
using the connection instructions on page
6 of this manual.
2
Using an AUDIO/VIDEO cable, connect
AUDIO and VIDEO IN on the VCR
intended for recording to AUDIO and
VIDEO OUT of MONITOR OUT on the
projection TV.
AUDIO and VIDEO IN on the VCR
intended for recording to AUDIO and
VIDEO OUT of MONITOR OUT on the
projection TV.
Notes:
• Do not change the input signal while
• Do not change the input signal while
editing through MONITOR OUT.
• When connecting a single VCR to the
projection TV: if VCR LINE OUT is
connected to VIDEO IN on the projection
TV, do not connect MONITOR OUT on
the projection TV to the VCR LINE
INPUT (see right). Doing so will cause
program interference and other viewing
problems.
connected to VIDEO IN on the projection
TV, do not connect MONITOR OUT on
the projection TV to the VCR LINE
INPUT (see right). Doing so will cause
program interference and other viewing
problems.
VIDEO
AUDIO-L
AUDIO-R
AUDIO-L
AUDIO-R
(Rear of projection TV)
VCR (for recording)
1
2
VMC-810S/820S
(not supplied)
(not supplied)
VCR (for playback)
VMC-810S/820S
(not supplied)
(not supplied)
LINE
OUT
IN
MONITOR
OUT
OUT
VIDEO IN
VCR
AUDIO-L
VIDEO
AUDIO-R
S VIDEO
S-LINK
S-LINK
VIDEO
AUDIO
L
R
R
VIDEO
L
AUDIO
VHF/UHF
AUX
(MONO)
IN
IN
VIDEO 1 VIDEO 3
VIDEO 4
OUT
MONITOR AUDIO
(VAR/FIX)
TV
VIDEO 5
VIDEO 1 VIDEO 3
VIDEO 4
VIDEO 5
TO
CONVERTER
Y
P
B
P
R
R
L
(MONO)
AUDIO
OUT
MONITOR
AUDIO
(VAR/FIX)
TV
AUDIO R AUDIO L VIDEO
LINE
OUT
OUT
IN
AUDIO R AUDIO L VIDEO
LINE
IN
OUT
IN
– 14 –
KP-48V85/53V85/61V85
RM-Y905
RM-Y905 RM-Y905
16
Installing and Connecting the Projection TV (continued)
Disconnect all power sources before making any connections.
Connecting a DVD Player (Upper
illustration)
illustration)
Using an AUDIO and S VIDEO cables,
connect AUDIO and S VIDEO IN on the
projection TV to AUDIO and S VIDEO OUT
on the DVD Player (White-AUDIO Left, Red-
AUDIO Right).
connect AUDIO and S VIDEO IN on the
projection TV to AUDIO and S VIDEO OUT
on the DVD Player (White-AUDIO Left, Red-
AUDIO Right).
Connecting a DVD Player with
component video output
connectors (Lower illustration)
component video output
connectors (Lower illustration)
1
Using an AUDIO cable, connect AUDIO of
LINE OUT on the DVD Player to AUDIO of
VIDEO 4 or 5 IN on the projection TV
(White-AUDIO Left, Red-AUDIO Right).
LINE OUT on the DVD Player to AUDIO of
VIDEO 4 or 5 IN on the projection TV
(White-AUDIO Left, Red-AUDIO Right).
2
Using three yellow VIDEO cables, connect
Y, P
Y, P
B
, and P
R
of COMPONENT VIDEO
OUT on the DVD Player to Y, P
B
, and P
R
of
VIDEO 4 or 5 IN on the projection TV.
Notes:
• Since the high quality pictures on a DVD
disc contain a lot of information, picture
noise may appear. In this case, adjust “Noise
Reduction” in the Video menu. (see “Noise
Reduction” on page 30)
noise may appear. In this case, adjust “Noise
Reduction” in the Video menu. (see “Noise
Reduction” on page 30)
• Some DVD Player terminals may be labeled
differently. If so, connect as follows:
Connect Y (green) to Y.
Connect P
Connect Y (green) to Y.
Connect P
B
(blue) to C
B
, C
b
or B-Y.
Connect P
R
(red) to C
R
, C
r
or R-Y.
AUDIO-L
DVD
YC-15V/30V (not supplied)
(Rear of projection TV)
Audio/S video
outputs
outputs
AUDIO-R
S VIDEO
RK-74A (not supplied)
VMC-10HG (not supplied)
RK-74A (not supplied)
AUDIO-R
AUDIO-L
DVD
(Rear of
projection
TV)
projection
TV)
Connect the DVD Player
directly to the projection TV.
Connecting the DVD Player
through other video
equipment will cause
unwanted picture noise.
directly to the projection TV.
Connecting the DVD Player
through other video
equipment will cause
unwanted picture noise.
Y
P
P
B
P
R
S VIDEO
S-LINK
S-LINK
VIDEO
AUDIO
L
R
R
VIDEO
L
AUDIO
VHF/UHF
AUX
(MONO)
IN
IN
VIDEO 1 VIDEO 3
VIDEO 4
OUT
MONITOR AUDIO
(VAR/FIX)
TV
VIDEO 5
VIDEO 1 VIDEO 3
VIDEO 4
VIDEO 5
TO
CONVERTER
Y
P
B
P
R
R
L
(MONO)
AUDIO
OUT
MONITOR
AUDIO
(VAR/FIX)
TV
LINE OUT
S VIDEO OUT
S-LINK
DIGITAL OUT
R–AUDIO 1–L
VIDEO
OPTICAL
COAXIAL
S VIDEO
S-LINK
S-LINK
VIDEO
AUDIO
L
R
R
VIDEO
L
AUDIO
VHF/UHF
AUX
(MONO)
IN
IN
VIDEO 1 VIDEO 3
VIDEO 4
OUT
MONITOR AUDIO
(VAR/FIX)
TV
VIDEO 5
VIDEO 1 VIDEO 3
VIDEO 4
VIDEO 5
TO
CONVERTER
Y
P
B
P
R
R
L
(MONO)
AUDIO
OUT
MONITOR
AUDIO
(VAR/FIX)
TV
LINE OUT
S VIDEO OUT
S-LINK
DIGITAL OUT
R–AUDIO 1–L
VIDEO
OPTICAL
COAXIAL
R-Y
Y
B-Y
COMPONENT VIDEO OUT
17
S VIDEO
S-LINK
S-LINK
VIDEO
AUDIO
L
R
R
VIDEO
L
AUDIO
VHF/UHF
AUX
(MONO)
IN
IN
VIDEO 1 VIDEO 3
VIDEO 4
OUT
MONITOR AUDIO
(VAR/FIX)
TV
VIDEO 5
VIDEO 1 VIDEO 3
VIDEO 4
VIDEO 5
TO
CONVERTER
Y
P
B
P
R
R
L
(MONO)
AUDIO
OUT
MONITOR
AUDIO
(VAR/FIX)
TV
LINE
OUT
OUT
IN
LINE
IN
VHF/UHF
Disconnect all power sources before making any connections.
Connecting an AV receiver
For greater control of all audio and video
equipment, connect an AV receiver.
equipment, connect an AV receiver.
1-2
Perform as described in “Connecting a
cable TV system/antenna to a VCR” on
page 6.
page 6.
3
Using a VIDEO cable, connect VIDEO 1 IN
on the projection TV to MONITOR OUT
on the AV receiver.
on the projection TV to MONITOR OUT
on the AV receiver.
4
Using an AUDIO/VIDEO cable, connect
TV OUT on the projection TV to VIDEO 2
IN on the AV receiver.
TV OUT on the projection TV to VIDEO 2
IN on the AV receiver.
5
Using an AUDIO/VIDEO cable, connect
the video equipment to the AV receiver.
the video equipment to the AV receiver.
AUDIO-R
AUDIO/
VIDEO 1
OUT
VIDEO 1
OUT
2
1
MONITOR OUT
AUDIO/
VIDEO 1
IN
VMC-810S/820S
(not supplied)
(not supplied)
3
VMC-810S/
820S (not
supplied)
820S (not
supplied)
AUDIO/
VIDEO 2 IN
VIDEO 2 IN
4
VCR
5
VIDEO
AUDIO-L
VIDEO
Cable/
Antenna
(Rear of projection TV)
VMC-10HG
(not supplied)
(not supplied)
5
AV receiver
– 15 –
KP-48V85/53V85/61V85
RM-Y905
RM-Y905 RM-Y905
18
Installing and Connecting the Projection TV (continued)
Connecting an audio system
For more dynamic sound, connect an audio
system to the projection TV.
system to the projection TV.
1
Using an AUDIO cable, connect AUDIO
(VAR/FIX) OUT on the projection TV to
one of the unused Line inputs (e.g. Tape-2,
AUX1, etc.) on the stereo.
(VAR/FIX) OUT on the projection TV to
one of the unused Line inputs (e.g. Tape-2,
AUX1, etc.) on the stereo.
2
Set the stereo to the chosen Line input and
use the Audio menu to set the audio
output and switch the TV’s speakers off.
(see “Audio Out” and “Speaker” on page 36)
use the Audio menu to set the audio
output and switch the TV’s speakers off.
(see “Audio Out” and “Speaker” on page 36)
Note:
• You can adjust VOLUME, “Bass,”
• You can adjust VOLUME, “Bass,”
“Treble,” “Balance,” “MTS/SAP” and
“Effect” with the supplied remote control.
The control items except VOLUME can be
adjusted only when “Audio Out” is set to
“Variable” in the Audio menu. (see
“Audio Out” on page 36)
“Effect” with the supplied remote control.
The control items except VOLUME can be
adjusted only when “Audio Out” is set to
“Variable” in the Audio menu. (see
“Audio Out” on page 36)
Connecting a Sony SAVA series
speaker system
speaker system
Use this connection to control the speaker’s
Dolby Pro Logic surround system and super
woofer mode with the remote control. (see
“Speaker” and “SAVA SP Control” on page
36)
Dolby Pro Logic surround system and super
woofer mode with the remote control. (see
“Speaker” and “SAVA SP Control” on page
36)
Disconnect all power sources before making any connections.
(Rear of projection TV)
RK-74A
(not supplied)
(not supplied)
Line inputs
AUDIO-L
(white)
(white)
Stereo amplifier
AUDIO-R
(red)
(red)
(Rear of projection TV)
AUDIO-L
(white)
(white)
AUDIO-R
(red)
(red)
Audio cord supplied
with the speakers
with the speakers
CONTROL S IN
RK-G34, etc. (not supplied)
1 IN L
1 IN R
2
SAVA series
speaker system
1
CONTROL S
OUT
OUT
S VIDEO
S-LINK
CONTROL S
OUT
40W(NOM)
80W(MAX)16
CENTER SPEAKER
IN
S-LINK
VIDEO
AUDIO
L
R
R
VIDEO
L
AUDIO
(MONO)
IN
IN
VIDEO 1 VIDEO 3
VIDEO 4
OUT
MONITOR AUDIO
(VAR/FIX)
TV
VIDEO 5
VIDEO 1 VIDEO 3
VIDEO 4
VIDEO 5
Y
P
B
P
R
R
L
(MONO)
AUDIO
OUT
MONITOR
AUDIO
(VAR/FIX)
TV
HRD
S VIDEO
S-LINK
CONTROL S
OUT
40W(NOM)
80W(MAX)16
CENTER SPEAKER
IN
S-LINK
VIDEO
AUDIO
L
R
R
VIDEO
L
AUDIO
(MONO)
IN
IN
VIDEO 1 VIDEO 3
VIDEO 4
OUT
MONITOR AUDIO
(VAR/FIX)
TV
VIDEO 5
VIDEO 1 VIDEO 3
VIDEO 4
VIDEO 5
Y
P
B
P
R
R
L
(MONO)
AUDIO
OUT
MONITOR
AUDIO
(VAR/FIX)
TV
19
S VIDEO
S-LINK
CONTROL S
OUT
40W(NOM)
80W(MAX)16
CENTER SPEAKER
IN
S-LINK
VIDEO
AUDIO
L
R
R
VIDEO
L
AUDIO
(MONO)
IN
IN
VIDEO 1 VIDEO 3
VIDEO 4
OUT
MONITOR AUDIO
(VAR/FIX)
TV
VIDEO 5
VIDEO 1 VIDEO 3
VIDEO 4
VIDEO 5
Y
P
B
P
R
R
L
(MONO)
AUDIO
OUT
MONITOR
AUDIO
(VAR/FIX)
TV
Disconnect all power sources before making any connections.
(Rear of projection TV)
RK-74A
(not supplied)
(not supplied)
Rear
speaker (L)
CENTER
SPEAKER
IN ‘, ’
SPEAKER
IN ‘, ’
Line inputs
Amplifier with
Dolby Pro Logic
decoder
Woofer
3
Rear
speaker (R)
Front
speaker (R)
Front
speaker (L)
1
2
AUDIO-L
(white)
(white)
AUDIO-R
(red)
(red)
1
Using the AUDIO cable supplied with the
speaker to AUDIO (VAR/FIX) OUT on
the projection TV.
speaker to AUDIO (VAR/FIX) OUT on
the projection TV.
2
Using the CONTROL S cable, connect
CONTROL S IN on the speaker to
CONTROL S OUT on the projection TV.
CONTROL S IN on the speaker to
CONTROL S OUT on the projection TV.
Connecting an amplifier that
supports Dolby Pro Logic decoder
supports Dolby Pro Logic decoder
If you use an amplifier with a Dolby Pro
Logic decoder instead of the projection TV’s
audio system, you can still use the projection
TV’s center speaker.
Logic decoder instead of the projection TV’s
audio system, you can still use the projection
TV’s center speaker.
1
Using the speaker cords (supplied with
the amplifier), connect the speaker
terminals on the amplifier to CENTER
SPEAKER IN +/– on the projection TV.
the amplifier), connect the speaker
terminals on the amplifier to CENTER
SPEAKER IN +/– on the projection TV.
2
Using an AUDIO cable, connect AUDIO
(VAR/FIX) OUT on the projection TV to
one of the unused Line inputs (e.g. Tape-
2, AUX1, etc.) on the amplifier (White-
AUDIO Left, red-AUDIO Right).
(VAR/FIX) OUT on the projection TV to
one of the unused Line inputs (e.g. Tape-
2, AUX1, etc.) on the amplifier (White-
AUDIO Left, red-AUDIO Right).
3
Set the amplifier to the chosen Line input
and use the Audio menu to set “Speaker”
to “Center” on the projection TV. (see
“Speaker” on page 36)
and use the Audio menu to set “Speaker”
to “Center” on the projection TV. (see
“Speaker” on page 36)
– 16 –
KP-48V85/53V85/61V85
RM-Y905
RM-Y905 RM-Y905
20
Installing and Connecting the Projection TV (continued)
Disconnect all power sources before making any connections.
Using the S-Link Function
S-Link is a Sony innovation designed to
make the Sony components work together. It
allows you to automatically switch the
projection TV’s input mode to video when
you press the play button on the Sony S-Link
VCR.
make the Sony components work together. It
allows you to automatically switch the
projection TV’s input mode to video when
you press the play button on the Sony S-Link
VCR.
Using the S-Link function without
a Sony AV receiver
a Sony AV receiver
1
Connect the Sony VCR (DVD). (see
“Connecting a cable TV system/antenna
to a VCR” on page 10 or “Connecting a
DVD Player with component video
output connectors” on page 16)
“Connecting a cable TV system/antenna
to a VCR” on page 10 or “Connecting a
DVD Player with component video
output connectors” on page 16)
2
Using an S-LINK cable, connect the
S-LINK jacks on the VCR (DVD) and the
projection TV. Ensure that both ends are
seated firmly and that the projection TV’s
S-LINK jack is in the same row as the
AUDIO/VIDEO cable extending from the
Sony VCR (DVD).
S-LINK jacks on the VCR (DVD) and the
projection TV. Ensure that both ends are
seated firmly and that the projection TV’s
S-LINK jack is in the same row as the
AUDIO/VIDEO cable extending from the
Sony VCR (DVD).
Refer also to the Operating Instructions
supplied with the VCR, satellite receiver,
DVD player, LD player and other Sony
video equipment for details.
supplied with the VCR, satellite receiver,
DVD player, LD player and other Sony
video equipment for details.
(Rear of projection TV)
AUDIO-R
AUDIO-L
VIDEO
Audio/video/S-LINK cable
Sony
DVD
DVD
RK-G34, etc.
(not supplied)
(not supplied)
Audio outputs
Component video
outputs
outputs
VMC-10HG
(not supplied)
(not supplied)
RK-74A
(not supplied)
(not supplied)
Sony VCR
Audio/video
outputs
outputs
S-LINK
S-LINK
2
1
1
Y P
B
P
R
S-LINK
S-LINK
S VIDEO
S-LINK
VIDEO
AUDIO
L
R
R
L
AUDIO
(MONO)
IN
IN
VIDEO 1 VIDEO 3
VIDEO 4
VIDEO 5
VIDEO 1 VIDEO 3
VIDEO 4
VIDEO 5
Y
P
B
P
R
LINE OUT
S VIDEO OUT
S-LINK
DIGITAL OUT
R–AUDIO 1–L
VIDEO
OPTICAL
COAXIAL
P
R
Y
P
B
COMPONENT VIDEO OUT
AUDIO R AUDIO L VIDEO
LINE
OUT
S-LINK
AUDIO-R
AUDIO-L
AUDIO-L
21
Using the S-Link function with a
Sony AV receiver
Sony AV receiver
1
Using a VIDEO cable, connect VIDEO 1
IN on the projection TV to MONITOR
OUT on the Sony AV receiver.
IN on the projection TV to MONITOR
OUT on the Sony AV receiver.
2
Using an AUDIO/VIDEO cable, connect
TV OUT on the projection TV to TV
AUDIO and VIDEO IN on the AV
receiver.
TV OUT on the projection TV to TV
AUDIO and VIDEO IN on the AV
receiver.
3
Using an S-LINK cable, connect S-LINK
on the VIDEO 1 IN panel on the
projection TV and S-LINK on MONITOR
OUT on the AV receiver.
on the VIDEO 1 IN panel on the
projection TV and S-LINK on MONITOR
OUT on the AV receiver.
4
Using an S-LINK cable, connect S-LINK
on the TV OUT panel on the projection
TV to S-LINK on TV IN on the AV
receiver.
on the TV OUT panel on the projection
TV to S-LINK on TV IN on the AV
receiver.
5
Using AUDIO/VIDEO and S-LINK
cables, connect the Sony video equipment
to the AV receiver.
cables, connect the Sony video equipment
to the AV receiver.
6
Use the Audio menu to set “Speaker” to
“Off” or “Center.” (see “Speaker” on
page 36)
“Off” or “Center.” (see “Speaker” on
page 36)
7
Press CH (CHANNEL) +/– to activate
the S-Link function.
the S-Link function.
Disconnect all power sources before making any connections.
Refer also to the Operating
Instructions supplied with the VCR,
satellite receiver, DVD player, LD
player and other Sony video
equipment for details.
Instructions supplied with the VCR,
satellite receiver, DVD player, LD
player and other Sony video
equipment for details.
(Rear of projection TV)
Audio/video/
S-Link cable (not
supplied)
S-Link cable (not
supplied)
TV OUT
Audio/
video
outputs
video
outputs
VCR 1
Audio/
video
outputs
video
outputs
RK-G34, etc.
(not supplied)
(not supplied)
TV IN
(S-LINK, video/
audio inputs)
(S-LINK, video/
audio inputs)
VIDEO 1 IN
(S-LINK, video/
audio inputs)
(S-LINK, video/
audio inputs)
Audio/video/
S-Link cable
(not supplied)
S-Link cable
(not supplied)
VCR 2
VIDEO 2 IN (S-LINK,
video/audio inputs)
video/audio inputs)
Sony AV receiver
S-LINK
2, 4
5
1
S-LINK
3
S-LINK
MONITOR OUT
(video output)
(video output)
MONITOR OUT
S-LINK
S-LINK
S VIDEO
S-LINK
S-LINK
VIDEO
AUDIO
L
R
R
VIDEO
L
AUDIO
(MONO)
IN
IN
VIDEO 1 VIDEO 3
VIDEO 4
OUT
MONITOR AUDIO
(VAR/FIX)
TV
VIDEO 5
VIDEO 1 VIDEO 3
VIDEO 4
VIDEO 5
Y
P
B
P
R
R
L
(MONO)
AUDIO
OUT
MONITOR
AUDIO
(VAR/FIX)
TV
AUDIO R AUDIO L VIDEO
LINE
OUT
AUDIO R AUDIO L VIDEO
S-LINK
S-LINK
LINE
OUT
Video cable
(not supplied)
(not supplied)
Click on the first or last page to see other KP-48V85 / KP-53V85 / KP-61V85 service manuals if exist.