DOWNLOAD Sony KP-43HT20 / KP-53HS20 / KP-53HS30 / KP-61HS20 / KP-61HS30 Service Manual ↓ Size: 2.44 MB | Pages: 78 in PDF or view online for FREE

Model name1[KP-43HT20] Model name2[KP-53HS20/30] Model name3[KP-61HS20/30]

[4-081-143-11 (1)]

✍

If your VCR is not equipped with S VIDEO, use a VIDEO cable (yellow) 
instead of the S VIDEO cable. 

✍

You will not be able to change channels on the VCR. Set your projection 
TV and VCR to channel 3 or 4, depending on your cable box channel 
output.

✍

Pressing ANT on the remote control switches between the channels 
coming in through the cable box (scrambled) and those coming directly 
to the projection TV (unscrambled).

Model name1[KP-43HT20] Model name2[KP-53HS20/30] Model name3[KP-61HS20/30]

[4-081-143-11 (1)]

Connecting two VCRs together, then into the projection TV, allows you to 
switch between the two to be sure that what you are playing on one is 
recording on the other. 

Using AUDIO and VIDEO cables, connect the playback VCR’s Audio 
and Video OUT jacks to the recording VCR’s Audio and Video IN 
jacks.

Using AUDIO and VIDEO cables, connect the recording VCR’s 
AUDIO and Video OUT jacks to the projection TV’s AUDIO and 
VIDEO IN jacks. 

✍

To perform tape editing, set the projection TV to the video input intended 
for playback by pressing TV/VIDEO on the remote control.

✍

You may need to change the video input on your VCR. Consult your 
VCR’s operating manual for instructions.

✍

If your VCRs have an S VIDEO jack: For best picture quality, use an 
S VIDEO connection instead of the yellow video cable on your combined 
A/V cable.
Using an S VIDEO cable, connect the playback VCR’s S VIDEO OUT jack 
to the recording VCR’s S VIDEO IN jack. S VIDEO does not provide audio, 
so audio cables must still be connected to provide sound.

✍

You cannot record signals from equipment connected to the Y, P

B

, P

R

 

input.

Model name1[KP-43HT20] Model name2[KP-53HS20/30] Model name3[KP-61HS20/30]

[4-081-143-11 (1)]

Connect the satellite antenna cable to the satellite receiver’s 
SATELLITE IN jack.

Using AUDIO and S VIDEO cables, connect the satellite receiver’s 
AUDIO and S VIDEO OUT jacks to the projection TV’s AUDIO and S 
VIDEO IN jacks.

Connect a coaxial cable from your cable or antenna to the projection 
TV’s VHF/UHF jack.

✍

If your satellite receiver is not equipped with S VIDEO, use a VIDEO cable 
(yellow) instead of the S VIDEO cable. 

Model name1[KP-43HT20] Model name2[KP-53HS20/30] Model name3[KP-61HS20/30]

[4-081-143-11 (1)]

Connect the satellite antenna cable to the satellite receiver’s 
SATELLITE IN jack.

Connect the CATV cable to the VCR’s VHF/UHF IN jack.

Using a coaxial cable, connect the VCR’s OUT jack to the projection 
TV’s VHF/UHF jack.

Using AUDIO and S VIDEO cables, connect the satellite receiver’s 
AUDIO and S VIDEO OUT jacks to the VCR’s AUDIO and S VIDEO 
IN jacks.

Using AUDIO and S VIDEO cables, connect the VCR’s AUDIO and S 
VIDEO OUT jacks to the TV’s AUDIO and S VIDEO IN jacks.

✍

Be sure your VCR’s video input is set correctly. Consult your VCR’s 
operating manual for instructions.

✍

Use TV/VIDEO to select
- VIDEO 1 to watch satellite TV or the VCR. (Your VCR must be turned 
on)
- VHF/UHF to watch cable TV.

✍

If your VCR or satellite receiver is not equipped with S VIDEO, use a 
VIDEO cable (yellow) instead of the S VIDEO cable.