Sony KLV-52V410A / KLV-52W410A Service Manual ▷ View online
17
KLV-52V410A/52W410A
KLV-52V410A/52W410A
Bezel
LCD Panel
1
2
1-9. LCD
PANEL
REMOVAL
NOTE: The LVDS cable can only be installed one way. There is colored tape on the cable to determine which side is attached
to the TCON and which side is attached to the BU Board.
1 Disconnect 3 connectors
2 Remove 2 screws
2 Remove 2 screws
1-9-1. CLEANING THE LCD PANEL
CAUTION: When cleaning the TV, be sure to unplug the power cord to avoid any chance of electric shock.
1 Clean the cabinet of the TV with a dry soft cloth.
2 Wipe the LCD screen gently with a soft cloth.
Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water.
If using a chemically pretreated cloth, please follow the instruction provided on the package.
Never use strong solvents such as a thinner, alcohol or benzine for cleaning.
Periodic vacuuming of the ventilation openings is recommended to ensure to proper ventilation.
If using a chemically pretreated cloth, please follow the instruction provided on the package.
Never use strong solvents such as a thinner, alcohol or benzine for cleaning.
Periodic vacuuming of the ventilation openings is recommended to ensure to proper ventilation.
18
KLV-52V410A/52W410A
KLV-52V410A/52W410A
1 Remove 7 screws from each Inverter Cover
2 Pull out the Balancer board from the Lamp Socket.
2 Pull out the Balancer board from the Lamp Socket.
1-10. BALANCER (ETC-INVERTER MT) BOARD REMOVAL
1
1
2
Cover
Balancer Board
LCD Panel
SHIELD REMOVAL
BALANCER (ETC-INVERTER) BOARD REMOVAL
WARNING
NEVER REMOVE THE
SCREWS SECURING THE
PLASTIC STRIP HOLDING
PLASTIC STRIP HOLDING
THE LAMP SOCKETS
DAMAGE TO THE
BACKLIGHT TUBES WILL
Only remove the screws securing the inverter
cover which may be metal or plastic. The
remaining plastic strip contains sockets for the
fluorescent backlights and should never be
loosened. The backlights will pop out of the
sockets and/or break the backlight requiring a
LCD panel replacement.
REMOVE SCREWS
SECURING
SHIELD
REMOVE
CONNECTORS AND
PULL BOARDS TO
THE RIGHT
!
.
OCCUR!
BACKLIGHT
END VIEW
SOCKET
19
KLV-52V410A/52W410A
KLV-52V410A/52W410A
2-1. VIEWING SERVICE ADJUSTMENT DATA
There are no adjustments necessary for these models. All data has
been set for optimal viewing for our customers. The following sections
are for informational purposes only.
been set for optimal viewing for our customers. The following sections
are for informational purposes only.
2-2. ACCESSING SERVICE ADJUSTMENT
MODE
1. TV must be in standby mode. (Power off).
2. Press the following buttons on the Remote Commander within a
second of each other:
DISPLAY
Channel
5
Volume
+
POWER .
POWER
Onscreen cursor
and select button
and select button
DISPLAY
RM-YD023
5
VOLUME+
JUMP
The fi rst service menu (TV) displays.
SECTION 2: SERVICE ADJUSTMENTS
TVLF CHECK
001 COLOR
001 COLOR
ADJ
001 R_DRV
SERVICE
DIGITAL PROGRAM
DATA
BE PROGRAM
DATA
BE PROGRAM
NVM
PACK
BOOT
BOOT
: H801.03 0070
: S001000
: TM1.000
: TD1.000
: TP1.000
: TB1.000
: S001000
: TM1.000
: TD1.000
: TP1.000
: TB1.000
00100
Sample TV Service Menu
2-3. VIEWING THE SERVICE MENUS
Use the Remote Commander to view the BE and Digital service menus
options.
options.
1. To display the Service Menu that contains the Category you want to
adjust, press JUMP on the Remote Commander.
(For a complete list of the service Categories refer to Service Menus)
(For a complete list of the service Categories refer to Service Menus)
NOTE: If the Service Menu display text is not completely visible, press
the Menu HOME button on the Remote Commander to refresh the
display.
the Menu HOME button on the Remote Commander to refresh the
display.
Press JUMP
TVLF CHECK
001 COLOR
001 COLOR
ADJ
001 R_DRV
SERVICE
DIGITAL PROGRAM
DATA
BE PROGRAM
DATA
BE PROGRAM
NVM
PACK
BOOT
BOOT
: H801.03 0070
: S001000
: TM1.000
: TD1.000
: TP1.000
: TB1.000
: S001000
: TM1.000
: TD1.000
: TP1.000
: TB1.000
00100
QM
0
0
INFO
SERVICE
DTV
Sample Service Menus
20
KLV-52V410A/52W410A
KLV-52V410A/52W410A
2-4. USING THE REMOTE COMMANDER TO
VIEW SERVICE DATA
Use the buttons on the Remote Commander to access the service menu
items and adjust the data values.
items and adjust the data values.
1. Access Service Mode.
Press the following buttons on the Remote Commander within a
second of each other:
second of each other:
DISPLAY
Channel
5
Volume
+
POWER .
Data Value
Category
Number
Number
Adjustment
Item Number
Item Number
Category
Adjustment
Item
Item
TVLF CHECK
001 COLOR
001 COLOR
ADJ
001 R_DRV
SERVICE
DIGITAL PROGRAM
DATA
BE PROGRAM
DATA
BE PROGRAM
NVM
PACK
BOOT
BOOT
: H801.03 0070
: S001000
: TM1.000
: TD1.000
: TP1.000
: TB1.000
: S001000
: TM1.000
: TD1.000
: TP1.000
: TB1.000
00100
The screen displays the fi rst category in the selected service menu.
NOTE: If the Service Menu display text is not completely visible,
press the Menu HOME button on the Remote Commander to refresh
the display.
press the Menu HOME button on the Remote Commander to refresh
the display.
2. To change the category, press 2 or 5 on the Remote Commander.
Note: Pressing 2 or 5 only changes the categories within the service
menu displayed.
To change a category on one of the other service menus, press the
menu displayed.
To change a category on one of the other service menus, press the
JUMP button until the correct service menu is displayed.
3. To change the adjustment item, press 1 or 4 on the Remote
Commander.
4. To exit service mode, turn the power off.
POWER
RM-YD023
ENT
0
Read data
from last
saved NVM
from last
saved NVM
5 Previous
Category
MUTING
Write into
memory
memory
1
Next item
2 Next
Category
4
Previous
item
item
8
Restore User Control
and Channel Memory
and Channel Memory
JUMP
Displays
Service
Menus
Service
Menus
2-5. RESETTING TO FACTORY DEFAULTS
Use the following instructions to restore the User Controls and
Channel Memory settings to the preset factory conditions.
Channel Memory settings to the preset factory conditions.
1. While holding down the on the Remote Commander, press the
POWER button on the Front Panel of the set.
The set restarts and displays the initial setup screen. This may take
several minutes.
several minutes.
Click on the first or last page to see other KLV-52V410A / KLV-52W410A service manuals if exist.