Sony KLV-46EX430 Service Manual ▷ View online
KLV-46EX430(CH)
21
Press
Press
Press
Press
Press
PROCEDURE TO ASSEMBLE OF REAR COVER
Note: When closing the rear cover, to prevent EMI, make sure that the FFC cable is touching the back chassis only with the cushions on it. Any other
parts of the FFC cable, e.g., because of deflection, should not touch the back chassis.
1
2
APPENDIX-1
1. Put the Rear Cover as below photo showing. And assemble it to TV-set completely.
2. Press the Rear Cover as below photo showing. And make the Hook to lock with Bezel completely.
2. Press the Rear Cover as below photo showing. And make the Hook to lock with Bezel completely.
Back Chassis
Cushion
FFC cable
KLV-46EX430(CH)
22
HOOK POSITION OF REAR COVER
APPENDIX-1
Notice for re-assemble Rear Cover
Press Hook area of Rear Cover until locking sound can be heard.
And check that Rear Cover has locked to Bezel by your eye. (refer to photo)
After that, screw up for Rear Cover fixing.
And check that Rear Cover has locked to Bezel by your eye. (refer to photo)
After that, screw up for Rear Cover fixing.
OK
NG
KLV-46EX430(CH)
23
APPENDIX-2
PANEL TAPE STICKING AND PARTS NUMBER
Himeron Tape 38.04AEP.001 (140*16*0.25MM)
4-445-917-01 (TAPE 140X16MM)
Black Mylar Tape 40.73Z30.001 (60*25MM)
Conductive Tape 42.3XC24.001 (50*30MM)
Himeron Tape
1.0±1.0mm
1.0±1.0mm
Himeron Tape 38.04AG1.001
(10*5*0.5MM)
＜
Assembly Part＞
SUPPORT POWER BOARD
4-294-841-01
SUPPORT POWER BOARD (SQUARE)
Note: The parts (SUPPORT POWER BOARD) which stuck the himeron tape are used for the mass-production TV.
However, When this SUPPORT POWER BOARD replacement is needed at service, since a himeron tape is unnecessary, please use 4-294-841-01 SUPPORT POWER
BOARD (SQUARE) instead.
BOARD (SQUARE) instead.
KLV-46EX430(CH)
24
APPENDIX-2
PANEL TAPE STICKING AND PARTS NUMBER
Himeron Tape 38.04AGA.001 (12*8*1MM) × 5pcs
Sony Part No. ： 4-448-208-01(TAPE 12X8MM)
Top View
0
±
2
0±1
6
±
2
0±1
6
±
2
Click on the first or last page to see other KLV-46EX430 service manuals if exist.