DOWNLOAD Sony KLV-40ZX1M Service Manual ↓ Size: 1.19 MB | Pages: 29 in PDF or view online for FREE

Model
KLV-40ZX1M
Pages
29
Size
1.19 MB
Type
PDF
Document
Service Manual
Brand
Device
TV
File
klv-40zx1m.pdf
Date

Sony KLV-40ZX1M Service Manual ▷ View online

KLV-40ZX1M (UC)     1-1
1-1. MONITOR
1-1-1. TERMINAL COVER REMOVAL
1-1-2. REAR COVER REMOVAL
Note: 1. Be aware that this model does not have a “
” mark engraved on the screw tightening place on the rear cover
as previous models.
2. When removing the rear cover from the panel module, slide the rear cover toward the upper side as shown
below.
Concerning adjustment after parts replacement:
The panel module is completed with adjustment at the time of factory shipment. Therefore, there is no necessity to
adjustment after replace the panel module.
SECTION 1
DISASSEMBLY
3
 Stand assy
2
 Two screws
   (+B 5X8)
1
 Terminal cover
2
 Two screws
   (+B 5X8)
2
 One screws
   (+PSW M3X6)
5
 Two screws
   (ORNAMENTAL M6X8)
6
 Two screws
   (+PSW M3X8)
5
 Two screws
   (ORNAMENTAL M6X8)
4
 One screw
    (+PSW M3X6)
 
8
 Panel module
7
 Rear cover
3
 Screw cap
1
 Screw cap
KLV-40ZX1M (UC)     1-2
1-1-3. IF1, H1L, H3L AND H4L BOARDS REMOVAL
1-1-4. B AND HSL BOARDS, AC INLET REMOVAL
Concerning adjustment after parts replacement:
When replace the B board assembly, visual check with monitor screen after replace it. If necessary for W/B
adjustment, adjust it along with the SEC. 3 WHITE BALANCE ADJUSTMENT.
Note: By default, the software that determines the language on the replacement B Board and/or the Panel Module is
set to Japanese.
To change the default language to English, a software update must be installed using a USB device.
(Check the 
Sony Electronics Service Information 
website for the latest software version for this model.)
1
 Two screws
    (+PSW M3X6)
4
 Two screws
    (+PSW M3X6)
qa
 One screw
    (+BV 3X10)
2
 Bottom cover (L)
5
 Botton cover (R)
qd
 H4L board
0
 H3L board 
7
 H1L board
qs
 Light guide
8
 Control button
9
 One screw
    (+BV 3X10)
6
 Two screws
    (+BV 3X10)
3
 ECS cover
qh
 Three screws
    (+PSW M3X6)
qd
 Two screws
    (+BV 3X10)
1
 Eight screws
    (+PSW M3X8)
9
 Three screws
    (+PSW M3X5)
6
 B board
0
 Shield case (HS)
qs
 HSL board
2
 Heat sink (B) assy
qf
 PA MXJ connector 
  assy 6P
qj
 Bottom cover (C)
qa
 Two screws
     (M2/FLAT HEAD)
qg
 AC inlet
ql
 Model name sheet (L)
qk
 Model name sheet(R)
w;
 HDMI label
7
 Thermal sheet(BT)
8
 Thermal sheet(CT)
3
 Lead wire with 
    connector
4
 Lead wire with 
    connector
5
 Lead wire with 
    connector
KLV-40ZX1M (UC)     1-3
1-1-5. GS1 AND LD1 BOARDS REMOVAL
Note: 1. When replacing the panel module, please place an order for the ornament plate with the panel module since
it is not included in the panel module.
As the Bezel and the PANEL Module is integrated, Bezel alone cannot be replaced with this model.
2. By default, the software that determines the language on the replacement B Board and/or the Panel Module
is set to Japanese.
To change the default language to English, a software update must be installed using a USB device.
(Check the 
Sony Electronics Service Information 
website for the latest software version for this model.)
8
 Panel module
4
 Eight screws
(+PSW M3X6)
1
 Seven screws
(+PSW M3X6)
2
 LD1 board
5
 GS1 board
6
 Insulate sheet (GS)
3
 Insulate sheet (LD)
7
 Ornament plate
KLV-40ZX1M (UC)     1-4E
1-2. STAND
1-2-1. BASE STAND REMOVAL
5
 One screw
  (+BVTP2 4X20)
2
 One screw
   (+PSW M4X12)
4
 Arm stand assy
3
 Four screws
   (+PSW M5X12)
5
 Two screws
   (+BVTP2 4X20)
8
 Two screws
    (+BVTP2 4X16)
6
 Two screws
    (+BVTP2 4X16)
1
 Stand arm cover (U)
9
 Stand case (U) assy
0
 Speaker box assy
qa
 Stand case (L) 
7
 Base stand assy 
1
 Two screws
   (+BV 3X10)
6
 One screw
  (+BV 3X10)
3
 Stand arm cover (L)
2
 EH spring 
5
 HS cover
4
 Stand protect
7
 MJX connector
1-2-2. ARM STAND REMOVAL
Page of 29
Display

Click on the first or last page to see other KLV-40ZX1M service manuals if exist.