Sony KLV-40Z410A / KLV-46Z410A (serv.man2) Service Manual ▷ View online
13
KLV-40Z410A/46Z410A
KLV-40Z410A/46Z410A
1-3. POWER UNIT (G4 BOARD) AND D3Z BOARD REMOVAL
1 Disconnect 3 connectors
2 Remove 6 screws
3 Release board holders
4 Disconnect 4 connectors
5 Remove 6 screws
1-4. TABLE-TOP STAND AND UNDER COVER REMOVAL
1 Remove 4 screws
2 Remove 2 screws
2
3
1
5
4
Power Unit (G4 Board)
D3Z Board
1
2
Under Cover
Table-Top Stand Assembly
14
KLV-40Z410A/46Z410A
KLV-40Z410A/46Z410A
1-5. AC INLET AND AC BRACKET REMOVAL
1 Remove 2 Screw Caps from Under Bar
2 Remove 2 screws from Under Bar
3 Slide out Speaker units from Bezel
4 Disconnect 1 connector and release IR Guide hooks to remove H4 Board
5 Disconnect 1 connector and Slide out H3V Board from Bezel
1 Remove 2 screws
2 Remove 2 screws
1-6. SPEAKERS, UNDER BAR, SCREW CAPS, H3V BOARD AND H4 BOARD REMOVAL
1
AC Bracket
AC Inlet
2
2
3
4
3
5
1
Speaker
Under Bar
Screw Cap
H4 Board
H3V Board
Speaker
15
KLV-40Z410A/46Z410A
KLV-40Z410A/46Z410A
1-7. VESA
FRAMES
AND
BOTTOM
FRAME
REMOVAL
1 Remove 4 screws from VESA Frames
2 Remove 4 screws
3 Remove 4 screws
2
1
3
VESA Frame
Bottom Frame
1 Disconnect 2 connectors
2 Remove 3 screws (KLV-40Z410A ONLY)
Remove 5 screws (KLV-46Z410A ONLY)
NOTE: The LVDS cable can only be installed one way. There is colored tape on the cable to determine which side is attached
to the TCON and which side is attached to the BU Board.
1-8. LCD
PANEL
REMOVAL
2
1
LCD Panel
Bezel
16
KLV-40Z410A/46Z410A
KLV-40Z410A/46Z410A
1-8-1. CLEANING THE LCD PANEL
CAUTION: When cleaning the TV, be sure to unplug the power cord to avoid any chance of electric shock.
1 Clean the cabinet of the TV with a dry soft cloth.
2 Wipe the LCD screen gently with a soft cloth.
Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water.
If using a chemically pretreated cloth, please follow the instruction provided on the package.
Never use strong solvents such as a thinner, alcohol or benzine for cleaning.
Periodic vacuuming of the ventilation openings is recommended to ensure to proper ventilation.
If using a chemically pretreated cloth, please follow the instruction provided on the package.
Never use strong solvents such as a thinner, alcohol or benzine for cleaning.
Periodic vacuuming of the ventilation openings is recommended to ensure to proper ventilation.
Clear Panel
Baffle
IR Guide
Illumination
Module
Module
Baffle
2
1
3
1
4
1-9. BAFFLES, IR GUIDE AND CLEAR PANEL REMOVAL
1 Remove 2 screws from Baffl es (KLV-46Z410A ONLY)
2 Remove 3 screws
3 Remove 2 screws
4 Disconnect one connector and slide out from Bezel
Click on the first or last page to see other KLV-40Z410A / KLV-46Z410A (serv.man2) service manuals if exist.