Sony KLV-40S410A Service Manual ▷ View online
17
KLV-40S410A
KLV-40S410A
1-8. LOUDSPEAKERS, LED GUIDE AND HM5 BOARD REMOVAL
1 Slide out Loudspeakers from Bezel
2 Remove 2 screws
3 Disconnect 1 connector and remove from Bezel
1
2
3
Loudspeaker
LED Guide
HM5 Board
Bezel
18
KLV-40S410A
KLV-40S410A
2-1. VIEWING SERVICE ADJUSTMENT DATA
There are no adjustments necessary for these models. All data has been
set for optimal viewing for our customers. The following sections are for
informational purposes only.
set for optimal viewing for our customers. The following sections are for
informational purposes only.
2-2. ACCESSING SERVICE ADJUSTMENT
MODE
1. TV must be in standby mode. (Power off).
2. Press the following buttons on the Remote Commander within a
second of each other:
DISPLAY
Channel
5
Volume
+
POWER .
POWER
Onscreen cursor
and select button
and select button
DISPLAY
RM-YD023
5
VOLUME+
JUMP
SECTION 2: SERVICE ADJUSTMENTS
The fi rst service menu (TV) displays.
TVLF CHECK
001 COLOR
001 COLOR
ADJ
001 R_DRV
SERVICE
DIGITAL PROGRAM
DATA
BE PROGRAM
DATA
BE PROGRAM
NVM
PACK
BOOT
BOOT
: H801.03 0070
: S001000
: TM1.000
: TD1.000
: TP1.000
: TB1.000
: S001000
: TM1.000
: TD1.000
: TP1.000
: TB1.000
00100
Sample TV Service Menu
2-3. VIEWING THE SERVICE MENUS
Use the Remote Commander to view the BE and Digital service menus
options.
options.
1. To display the Service Menu that contains the Category you want to
adjust, press JUMP on the Remote Commander.
(For a complete list of the service Categories refer to Service Menus)
(For a complete list of the service Categories refer to Service Menus)
NOTE: If the Service Menu display text is not completely visible, press
the Menu HOME button on the Remote Commander to refresh the
display.
the Menu HOME button on the Remote Commander to refresh the
display.
Press JUMP
TVLF CHECK
001 COLOR
001 COLOR
ADJ
001 R_DRV
SERVICE
DIGITAL PROGRAM
DATA
BE PROGRAM
DATA
BE PROGRAM
NVM
PACK
BOOT
BOOT
: H801.03 0070
: S001000
: TM1.000
: TD1.000
: TP1.000
: TB1.000
: S001000
: TM1.000
: TD1.000
: TP1.000
: TB1.000
00100
QM
0
0
INFO
SERVICE
DTV
Sample BE and Digital Service Menus
HOME
19
KLV-40S410A
KLV-40S410A
2-4. USING THE REMOTE COMMANDER TO
VIEW SERVICE DATA
Use the buttons on the Remote Commander to access the service menu
items and adjust the data values.
items and adjust the data values.
1. Access Service Mode.
Press the following buttons on the Remote Commander within a
second of each other:
second of each other:
DISPLAY
Channel
5
Volume
+
POWER .
Data Value
Category
Number
Number
Adjustment
Item Number
Item Number
Category
Adjustment
Item
Item
TVLF CHECK
001 COLOR
001 COLOR
ADJ
001 R_DRV
SERVICE
DIGITAL PROGRAM
DATA
BE PROGRAM
DATA
BE PROGRAM
NVM
PACK
BOOT
BOOT
: H801.03 0070
: S001000
: TM1.000
: TD1.000
: TP1.000
: TB1.000
: S001000
: TM1.000
: TD1.000
: TP1.000
: TB1.000
00100
The screen displays the fi rst category in the selected service menu.
NOTE: If the Service Menu display text is not completely visible,
press the Menu HOME button on the Remote Commander to refresh
the display.
press the Menu HOME button on the Remote Commander to refresh
the display.
2. To change the category, press 2 or 5 on the Remote Commander.
Note: Pressing 2 or 5 only changes the categories within the service
menu displayed.
To change a category on one of the other service menus, press the
menu displayed.
To change a category on one of the other service menus, press the
JUMP button until the correct service menu is displayed.
3. To change the adjustment item, press 1 or 4 on the Remote
Commander.
4. To exit service mode, turn the power off.
ENT
0
Read data
from last
saved NVM
from last
saved NVM
5
RM-YD023
Previous
Category
Category
1
2
MUTING
4
Write into
memory
memory
8
Next item
Next
Category
Category
Previous
item
item
Restore User Control
and Channel Memory
and Channel Memory
POWER
JUMP
Displays
Service
Menus
Service
Menus
2-5. RESETTING TO FACTORY DEFAULTS
Use the following instructions to restore the User Controls and
Channel Memory settings to the preset factory conditions.
Channel Memory settings to the preset factory conditions.
1. While holding down the on the Remote Commander, press the
POWER button on the Front Panel of the set.
The set restarts and displays the initial setup screen. This may take
several minutes.
several minutes.
20
KLV-40S410A
KLV-40S410A
SECTION 3: DIAGRAMS
3-1. CIRCUIT BOARDS LOCATION
3-2. PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS INFORMATION
All capacitors are in μF unless otherwise noted. pF : μμF 50WV or
less are not indicated except for electrolytics and tantalums.
less are not indicated except for electrolytics and tantalums.
All electrolytics are in 50V unless otherwise specifi ed.
All resistors are in ohms. k
Ω=1000Ω, MΩ=1000kΩ
Indication of resistance, which does not have one for rating
electrical power, is as follows:
electrical power, is as follows:
Pitch : 5mm
Rating
electrical
power
:
1
/
4
W
1
/
4
W in resistance,
1
/
10
W and
1
/
16
W in chip resistance.
: nonfl ammable resistor
: fusible resistor
: internal component
: panel designation and adjustment for repair
: earth ground
: earth-chassis
All variable and adjustable resistors have characteristic curve B,
unless otherwise noted.
unless otherwise noted.
Readings are taken with a color-bar signal input.
Readings are taken with a 10M
Ω digital multimeter.
Voltages are DC with respect to ground unless otherwise noted.
Voltage variations may be noted due to normal production
tolerances.
tolerances.
All voltages are in V.
S : Measurement impossibility.
: B+line.
: B-line. (Actual measured value may be different).
: signal path. (RF)
Circled numbers are waveform references.
The components identifi ed by shading and
!
symbol are critical for safety. Replace
only with part number specifi ed.
The symbol
indicates a fast operating fuse and is displayed on the component
side of the board. Replace only with fuse of the same rating as marked.
NOTE: The components identifi ed by a red outline and a mark contain confi dential
information. Specifi c instructions must be adhered to whenever these components
are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
information. Specifi c instructions must be adhered to whenever these components
are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
HB1
POWER UNIT
(IP5Z Board)
(IP5Z Board)
HM5
BU
Click on the first or last page to see other KLV-40S410A service manuals if exist.