Sony KLV-32U100M / KLV-40U100M Service Manual ▷ View online
Step
Figure
Description
Figure
Description
1.1
Service
Position
1.2
Stand Removal
*The rear cover
can be removed
without
removing the
tabletop Stand.
1.3
Rear Cover
Removal
1.4
Main shield
Removal
1.5
A Board (Main
Board)
Assembly and
G Board
(Power Board)
Assembly
Removal
1.6
Button Assy
Removal
Remove the 2 screws
then remove the Button
Assy.
Remove the 2 screws
then remove the Button
Assy.
Remove 7 screws / 8
connectors to release
the A Board (Main
Board) Assembly from
the main frame.
Remove 6 screws / 4
connectors to release
the
G1 Board (
Power
Board) Assembly.
Gently place the
monitor face down on
a table.
Remove 8 screws to
release the Tabletop
Stand from the unit.
Remove 12 screws to
release the rear cover.
Remove 24 screws to
release the main
shield.
Note: There are four
screws in the top of the
shield (not visible in
this photo).
Remove 5 screws / 8
connectors to release
the A Board (Main
Board) Assembly from
the main frame.
Remove 5 screws / 5
connectors to release
the
G2 Board (
Power
Board) Assembly.
Gently place the
monitor face down on
a table.
Remove 6 screws to
release the Tabletop
Stand from the unit.
KLV-32U100M
KLV-40U100M
Remove 12 screws to
release the rear cover.
Remove 16 screws to
release the main
shield.
Note: There are four
screws in the top of the
shield (not visible in
this photo).
SECTION 1 : DISASSEMBLY
KLV-32U100M/KLV-40U100M
KLV-32U100M/KLV-40U100M
9
1.7
l
a
v
o
m
e
R
d
n
a
t
S
r
e
v
o
C
l
a
v
o
m
e
R
d
n
a
t
S
r
e
v
o
C
Remove 1 screw.
Remove Frame.
Remove 16 screws.
Remove 2 frames
1.8
Bezel
Removal
Frame
Removal
Remove 6 screws and 2
connectors
Remove panel from the
bezel.
(Gently lift out the panel
from the bezel using
caution to avoid
scratching the panel)
Remove 15 screws and
3 connectors
Remove panel from the
bezel.
(Gently lift out the panel
from the bezel using
caution to avoid
scratching the panel)
Remove 18 screws
(Red) and 1 Aluminum
Tape (Blue) and 6
connectors (Yellow).
Remove 17 screws
(Red) and 1 Aluminum
Tape (Blue) and 6
connectors (Yellow).
KLV-32U100M/KLV-40U100M
KLV-32U100M/KLV-40U100M
10
To adjust various set features, use the Remote Commander to put the set into service mode to display
the Service menu.
(Input the signal to monitor.Please confirm
tha t
t
here is
no OSD before enter
the service mode )
1) Press “
” Enter button twice
2) Press “MUTING” button
3) Press “
” Enter button
4) Press “MUTING” button
5) Press “MENU” button
To exit "SERVICE MODE” , press
the “MENU” button
SECTION 2 : SERVICE MODE (factory mode)
KLV-32U100M/KLV-40U100M
KLV-32U100M/KLV-40U100M
11
user
automatically switch to
please do not monitor
KLV-32U100M/KLV-40U100M
KLV-32U100M/KLV-40U100M
12
Click on the first or last page to see other KLV-32U100M / KLV-40U100M service manuals if exist.