Sony KLV-32R300A Service Manual ▷ View online
1. Turn on the TV.
Software update by USB memory
2. Unplug the AC power cord.
3. Connect USB memory.
APPENDIX-4 Software data update
Do not connect USB memory in standby mode.
4. Plug the AC power cord then start update automatically.
1) Lights up Green LED. (no picture)
KLV-32R300A(CH)
2) Starting update
Orange LED is flushing. (1-2min)
4 Software data update
5. Unplug AC power cord and disconnect USB memory.
3) Finish update
Lights up Green LED again and TV is turned on.
Lights up Green LED again and TV is turned on.
6. Plug the AC power cord then turn on the TV.
4. Plug the AC power cord then start update automatically.
25
Confirm Software version
Please confirm whether it is the latest software.
product information of setting menu.
[HOME] , [Settings] , [Set-up] , [Product Information]
APPENDIX-5 Operation Time, Boot Count, Panel Operation Time
[To Bring Up Self Diagnostic(SELF CHECK)]
In standby mode, press buttons on the remote commander sequentially in rapid succession as shown below:
In standby mode, press buttons on the remote commander sequentially in rapid succession as shown below:
5
*
: Note that this differs from enter
*
Info
Channel
Volume
[Operation Time, Boot Count, Panel Operation Time Screen]
Service Mode
Status Information
>>
Self diagnosis history
>>
Panel Selection
<[PANEL_TPT315B5_WX221]>
]>
NO_SIGNAL_MUTE
<[
Off
]>
TUNING SYSTEM
<[
AUTO
]>
LVDS Spectrum (%o)
<[
10
]>
Low of HPD
<[
5
]>
SERIAL NUMBER EDID
0000001
MODEL NAME EDID
KLV-32R300A
Load Service Table
<[
Off
]>
KLV-32R300A(CH)
You can check the TV set operation time, boot count and panel operation time in service menu although this model doesn’t supp
After you have completed the repairs, clear the result display to “0”.
Clearing the Self Check Diagnostic List
After you have completed the repairs, clear the result display to “0”.
Clearing the Self Check Diagnostic List
•
Panel operation time :
Press the Channel 7 => Channel 0 .
Exiting the Self-diagnostic screen
To exit the Self Diagnostic screen, turn off the power to the TV by pressing the POWER button on the remote or the POWER butt
To exit the Self Diagnostic screen, turn off the power to the TV by pressing the POWER button on the remote or the POWER butt
[</>]Set[Home]Exit
5 Operation Time, Boot Count, Panel Operation Time
In standby mode, press buttons on the remote commander sequentially in rapid succession as shown below:
ers from entering the service mode (volume +)
TV POWER
SELF CHECK
SELF CHECK
BACK
<<
002 MAIN_POWER
000
003 DC_ALERT1
000
003 AUDIO_PROT
000
004 BALANCER_ERR
000
005 TCON_ERR
000
005 PANEL_ID_NVM_ERR
000
006 BACKLIGHT_ERR
000
007 TEMP_ERR
000
12345-67891-23456
[Home] Exit
Not Work
26
Total operation time by hour
Boot count
Panel operation time by hour
You can check the TV set operation time, boot count and panel operation time in service menu although this model doesn’t support self-diagnostics.
To exit the Self Diagnostic screen, turn off the power to the TV by pressing the POWER button on the remote or the POWER button on the TV.
APPENDIX-5 Operation Time, Boot Count, Panel Operation Time
[To Bring Up Self Diagnostic(SELF CHECK)]
In standby mode, press buttons on the remote commander sequentially in rapid succession as shown below:
In standby mode, press buttons on the remote commander sequentially in rapid succession as shown below:
5
*
: Note that this differs from enter
*
Info
Channel
Volume
[Operation Time, Boot Count, Panel Operation Time Screen]
Service Mode
Status Information
>>
Self diagnosis history
>>
Panel Selection
<[PANEL_TPT315B5_WX221]>
]>
NO_SIGNAL_MUTE
<[
Off
]>
TUNING SYSTEM
<[
AUTO
]>
LVDS Spectrum (%o)
<[
10
]>
Low of HPD
<[
5
]>
SERIAL NUMBER EDID
0000001
MODEL NAME EDID
KLV-32R300A
Load Service Table
<[
Off
]>
KLV-32R300A(CH)
You can check the TV set operation time, boot count and panel operation time in service menu although this model doesn’t supp
After you have completed the repairs, clear the result display to “0”.
Clearing the Self Check Diagnostic List
After you have completed the repairs, clear the result display to “0”.
Clearing the Self Check Diagnostic List
•
Panel operation time :
Press the Channel 7 => Channel 0 .
Exiting the Self-diagnostic screen
To exit the Self Diagnostic screen, turn off the power to the TV by pressing the POWER button on the remote or the POWER butt
To exit the Self Diagnostic screen, turn off the power to the TV by pressing the POWER button on the remote or the POWER butt
[</>]Set[Home]Exit
5 Operation Time, Boot Count, Panel Operation Time
In standby mode, press buttons on the remote commander sequentially in rapid succession as shown below:
ers from entering the service mode (volume +)
TV POWER
SELF CHECK
SELF CHECK
BACK
<<
002 MAIN_POWER
000
003 DC_ALERT1
000
003 AUDIO_PROT
000
004 BALANCER_ERR
000
005 TCON_ERR
000
005 PANEL_ID_NVM_ERR
000
006 BACKLIGHT_ERR
000
007 TEMP_ERR
000
12345-67891-23456
[Home] Exit
Not Work
26
Total operation time by hour
Boot count
Panel operation time by hour
You can check the TV set operation time, boot count and panel operation time in service menu although this model doesn’t support self-diagnostics.
To exit the Self Diagnostic screen, turn off the power to the TV by pressing the POWER button on the remote or the POWER button on the TV.
APPENDIX-5 Operation Time, Boot Count, Panel Operation Time
[To Bring Up Self Diagnostic(SELF CHECK)]
In standby mode, press buttons on the remote commander sequentially in rapid succession as shown below:
In standby mode, press buttons on the remote commander sequentially in rapid succession as shown below:
5
*
: Note that this differs from enter
*
Info
Channel
Volume
[Operation Time, Boot Count, Panel Operation Time Screen]
Service Mode
Status Information
>>
Self diagnosis history
>>
Panel Selection
<[PANEL_TPT315B5_WX221]>
]>
NO_SIGNAL_MUTE
<[
Off
]>
TUNING SYSTEM
<[
AUTO
]>
LVDS Spectrum (%o)
<[
10
]>
Low of HPD
<[
5
]>
SERIAL NUMBER EDID
0000001
MODEL NAME EDID
KLV-32R300A
Load Service Table
<[
Off
]>
KLV-32R300A(CH)
You can check the TV set operation time, boot count and panel operation time in service menu although this model doesn’t supp
After you have completed the repairs, clear the result display to “0”.
Clearing the Self Check Diagnostic List
After you have completed the repairs, clear the result display to “0”.
Clearing the Self Check Diagnostic List
•
Panel operation time :
Press the Channel 7 => Channel 0 .
Exiting the Self-diagnostic screen
To exit the Self Diagnostic screen, turn off the power to the TV by pressing the POWER button on the remote or the POWER butt
To exit the Self Diagnostic screen, turn off the power to the TV by pressing the POWER button on the remote or the POWER butt
[</>]Set[Home]Exit
5 Operation Time, Boot Count, Panel Operation Time
In standby mode, press buttons on the remote commander sequentially in rapid succession as shown below:
ers from entering the service mode (volume +)
TV POWER
SELF CHECK
SELF CHECK
BACK
<<
002 MAIN_POWER
000
003 DC_ALERT1
000
003 AUDIO_PROT
000
004 BALANCER_ERR
000
005 TCON_ERR
000
005 PANEL_ID_NVM_ERR
000
006 BACKLIGHT_ERR
000
007 TEMP_ERR
000
12345-67891-23456
[Home] Exit
Not Work
26
Total operation time by hour
Boot count
Panel operation time by hour
You can check the TV set operation time, boot count and panel operation time in service menu although this model doesn’t support self-diagnostics.
To exit the Self Diagnostic screen, turn off the power to the TV by pressing the POWER button on the remote or the POWER button on the TV.