Sony KLV-32LL50A Service Manual ▷ View online
57
KLV-32LL50A
KLV-32LL50A
Sony Corporation
Sony Technology Center
Technical Services
Service Promotion Department
9-883-824-02
English
2009EJ74WEB-1
Printed in USA
© 2009.05
REF. NO.
PART NO.
DESCRIPTION
VALUES
REF. NO.
PART NO.
DESCRIPTION
VALUES
IC
IC401 6-600-714-01 HIC
GP1UE28QK0VF
CHIP CONDUCTOR
JR301 1-216-864-11 SHORT
CHIP
JR302 1-216-864-11 SHORT
CHIP
JR303 1-216-864-11 SHORT
CHIP
JR304 1-216-864-11 SHORT
CHIP
JR305 1-216-864-11 SHORT
CHIP
TRANSISTOR
Q303 6-551-815-01 TRANSISTOR
UNR52A1G0LS0
Q304 6-551-815-01 TRANSISTOR
UNR52A1G0LS0
Q305 6-551-815-01 TRANSISTOR
UNR52A1G0LS0
Q320 6-551-699-01 TRANSISTOR
ISA1602AM1TP-1EF
Q321 6-551-815-01 TRANSISTOR
UNR52A1G0LS0
RESISTOR
R303 1-218-831-11 METAL
CHIP
220 0.50%
1/10W
R304 1-218-845-11 METAL
CHIP
820 0.50%
1/10W
R305 1-218-827-11 METAL
CHIP
150 0.50%
1/10W
R321 1-216-839-11 METAL
CHIP
33K 5% 1/10W
R322 1-216-821-11 METAL
CHIP
1K 5% 1/10W
R323 1-216-833-11 METAL
CHIP
10K 5% 1/10W
R325 1-216-864-11 SHORT
CHIP
R326 1-216-847-11 METAL
CHIP
150K 5% 1/10W
R328 1-216-823-11 METAL
CHIP
1.5K 5% 1/10W
R329 1-218-847-11 METAL
CHIP
1K 0.50%
1/10W
R332 1-216-864-11 SHORT
CHIP
R401 1-216-817-11 METAL
CHIP
470 5% 1/10W
R402 1-216-805-11 METAL
CHIP
47
5% 1/10W
ACCESSORIES AND PACKING
!
1-835-328-11
AC POWER CORD (WITH CONNECTOR)
*
3-289-786-01
BAG, PROTECTION
*
3-287-548-11
BAG, PROTECTION (STAND)
*
4-137-967-01
CARTON, INDIVIDUAL
*
4-137-969-01
CUSHION, LOWER
*
4-137-968-01
CUSHION, UPPER
4-133-479-41
GUIDE, QUICK SETUP
4-133-478-41
MANUAL, INSTRUCTION
MISCELLANEOUS
2-580-608-01 SCREW,
+PSW
M5X16
(SCREWS TO ATTACH TABLE-TOP STAND TO LCD TV)
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV
CAUTION: These screws cannot be used to secure the TV to
the Wall Mount Brackets
REMOTE COMMANDER
1-487-279-21
REMOTE COMMANDER (RM-YA010)
9-885-131-73
COVER, BATTERY (for RM-YA010)
HM7
NOTE: The components identifi ed by shading
and
and
!
mark are critical for safety. Replace only
with part number specifi ed.
A-1
KLV-32LL50A
KLV-32LL50A
APPENDIX A: ENCRYPTION KEY COMPONENTS
Encryption key components developed by Sony Corporation contain confi dential
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
As part of this agreement specifi c instructions must be adhered to whenever a Circuit
Board containing encryption key components is repaired and/or replaced pursuant to the
following:
Board containing encryption key components is repaired and/or replaced pursuant to the
following:
1) In the service manual the Circuit Board(s) containing encryption key components
shall be identifi ed with a red outline and a .
2) Only repair boards or components listed in the service manual shall be utilized for
replacement and/or repair.
3) Disassembly, decryption, or reverse-engineering component(s) is strictly prohibited.
4) Any board in which the Servicer replaces an encryption key component must be
placed back into the set it orignally came from and the replaced defective component
MUST BE DESTROYED. Boards cannot be swapped.
MUST BE DESTROYED. Boards cannot be swapped.
5) If a Circuit Board identifi ed with a red outline and a in the service manual is deemed
to be defective:
a) and if a core charge is imposed and is covered under the product warranty, the
defective un-repaired or modifi ed board MUST BE RETURNED to Sony.
b) and if the core charge is NOT covered under the product warranty, the defective
un-repaired or modifi ed board MUST BE DESTROYED.
5) If a unit is destroyed (such as fi eld scrap), the Circuit Board identifi ed with a
red outline and a in the service manual MUST BE DESTROYED.
A-1
KLV-32LL50A
KLV-32LL50A
APPENDIX A: ENCRYPTION KEY COMPONENTS
Encryption key components developed by Sony Corporation contain confi dential
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
As part of this agreement specifi c instructions must be adhered to whenever a Circuit
Board containing encryption key components is repaired and/or replaced pursuant to the
following:
Board containing encryption key components is repaired and/or replaced pursuant to the
following:
1) In the service manual the Circuit Board(s) containing encryption key components
shall be identifi ed with a red outline and a .
2) Only repair boards or components listed in the service manual shall be utilized for
replacement and/or repair.
3) Disassembly, decryption, or reverse-engineering component(s) is strictly prohibited.
4) Any board in which the Servicer replaces an encryption key component must be
placed back into the set it orignally came from and the replaced defective component
MUST BE DESTROYED. Boards cannot be swapped.
MUST BE DESTROYED. Boards cannot be swapped.
5) If a Circuit Board identifi ed with a red outline and a in the service manual is deemed
to be defective:
a) and if a core charge is imposed and is covered under the product warranty, the
defective un-repaired or modifi ed board MUST BE RETURNED to Sony.
b) and if the core charge is NOT covered under the product warranty, the defective
un-repaired or modifi ed board MUST BE DESTROYED.
5) If a unit is destroyed (such as fi eld scrap), the Circuit Board identifi ed with a
red outline and a in the service manual MUST BE DESTROYED.
A-1
KLV-32LL50A
KLV-32LL50A
APPENDIX A: ENCRYPTION KEY COMPONENTS
Encryption key components developed by Sony Corporation contain confi dential
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
As part of this agreement specifi c instructions must be adhered to whenever a Circuit
Board containing encryption key components is repaired and/or replaced pursuant to the
following:
Board containing encryption key components is repaired and/or replaced pursuant to the
following:
1) In the service manual the Circuit Board(s) containing encryption key components
shall be identifi ed with a red outline and a .
2) Only repair boards or components listed in the service manual shall be utilized for
replacement and/or repair.
3) Disassembly, decryption, or reverse-engineering component(s) is strictly prohibited.
4) Any board in which the Servicer replaces an encryption key component must be
placed back into the set it orignally came from and the replaced defective component
MUST BE DESTROYED. Boards cannot be swapped.
MUST BE DESTROYED. Boards cannot be swapped.
5) If a Circuit Board identifi ed with a red outline and a in the service manual is deemed
to be defective:
a) and if a core charge is imposed and is covered under the product warranty, the
defective un-repaired or modifi ed board MUST BE RETURNED to Sony.
b) and if the core charge is NOT covered under the product warranty, the defective
un-repaired or modifi ed board MUST BE DESTROYED.
5) If a unit is destroyed (such as fi eld scrap), the Circuit Board identifi ed with a
red outline and a in the service manual MUST BE DESTROYED.