Sony KLV-32L500A Service Manual ▷ View online
KLV-32L500A
KLV-32L500A
57
Sony Corporation
Sony Technology Center
Technical Services
Service Promotion Department
9-883-826-02
English
2009EJ74WEB-1
Printed in USA
© 2009.05
REF. NO.
PART NO.
DESCRIPTION
VALUES
REF. NO.
PART NO.
DESCRIPTION
VALUES
HT1
A-1663-488-B
HT1
BOARD,
MOUNTED
C2800 1-107-826-11 CERAMIC
CHIP
0.1μF 10%
16V
C2801 1-162-970-11 CERAMIC
CHIP
0.01μF 10%
25V
C2802 1-107-826-11 CERAMIC
CHIP
0.1μF 10%
16V
C2803 1-162-960-11 CERAMIC
CHIP
220PF 10%
50V
CONNECTOR
CN2801
1-564-521-11
PLUG, CONNECTOR 6P
DIODE
D2801 8-719-061-96 DIODE
SLR-325DCT31
D2802 6-501-732-01 DIODE
MAZ8056G0LS0
D2803 6-501-732-01 DIODE
MAZ8056G0LS0
D2804 6-501-483-01 DIODE
SLR-325VCT31P
D2805 6-501-732-01 DIODE
MAZ8056G0LS0
D2806 6-501-732-01 DIODE
MAZ8056G0LS0
D2807 8-719-060-27 DIODE
SLR-325MCT31
IC
IC2800 6-600-502-01 HIC
GP1UE26RK0VF
CHIP CONDUCTOR
JR2801 1-216-864-11 SHORT
CHIP
0
JR2802 1-216-864-11 SHORT
CHIP
0
JR2803 1-216-864-11 SHORT
CHIP
0
TRANSISTOR
Q2801 8-729-027-56 TRANSISTOR
DTC143TKA-T146
Q2802 8-729-027-56 TRANSISTOR
DTC143TKA-T146
Q2803 8-729-027-56 TRANSISTOR
DTC143TKA-T146
RESISTOR
R2801 1-216-821-11 METAL
CHIP
1K 5% 1/10W
R2802 1-216-817-11 METAL
CHIP
470 5% 1/10W
R2803 1-216-805-11 METAL
CHIP
47
5% 1/10W
R2804 1-216-821-11 METAL
CHIP
1K 5% 1/10W
R2805 1-216-821-11 METAL
CHIP
1K 5% 1/10W
HT1
ACCESSORIES AND PACKING
!
1-835-328-11
AC POWER CORD (WITH CONNECTOR)
4-041-997-01
BAG, POLYETHYLENE
3-701-617-62
BAG, POLYETHYLENE, STANDARD
*
3-213-717-01
BAG, PROTECTION (STAND)
*
4-143-570-01
CARTON, INDIVIDUAL
*
4-143-572-01
CUSHION, LOWER
*
4-143-571-01
CUSHION, UPPER
4-133-479-41
GUIDE, QUICK SETUP
4-133-478-41
MANUAL, INSTRUCTION
3-274-931-11
SHEET, PROTECTION
MISCELLANEOUS
4-145-338-01 LED,
SHADE
2-580-607-01 SCREW,
+PSW
M5X12
(SCREWS TO ATTACH TABLE-TOP STAND TO LCD TV)
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV
CAUTION: These screws cannot be used to secure the TV to
the Wall Mount Brackets.
X-2348-141-2
SUPPORT BELT KIT
Contains the 5 items listed below:
2-580-604-01 SCREW,
+PSW
M4x20
2-580-639-01
SCREW, +BVTP 4x12 Type 2 IT-3
2-580-663-02 SCREW,
WOOD
3.8x20
4-124-351-01 BRACKET,
FALL
LOCK
4-133-849-02 BELT,
FALL
LOCK
REMOTE COMMANDER
1-487-279-21
REMOTE COMMANDER (RM-YA010)
9-885-131-73
COVER, BATTYERY (for RM-YA010)
NOTE: The components identifi ed by shading
and
and
!
mark are critical for safety. Replace only
with part number specifi ed.
A-1
KLV-32L500A
KLV-32L500A
APPENDIX A: ENCRYPTION KEY COMPONENTS
Encryption key components developed by Sony Corporation contain confi dential
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
As part of this agreement specifi c instructions must be adhered to whenever a Circuit
Board containing encryption key components is repaired and/or replaced pursuant to the
following:
Board containing encryption key components is repaired and/or replaced pursuant to the
following:
1) In the service manual the Circuit Board(s) containing encryption key components
shall be identifi ed with a red outline and a .
2) Only repair boards or components listed in the service manual shall be utilized for
replacement and/or repair.
3) Disassembly, decryption, or reverse-engineering component(s) is strictly prohibited.
4) Any board in which the Servicer replaces an encryption key component must be
placed back into the set it orignally came from and the replaced defective component
MUST BE DESTROYED. Boards cannot be swapped.
MUST BE DESTROYED. Boards cannot be swapped.
5) If a Circuit Board identifi ed with a red outline and a in the service manual is deemed
to be defective:
a) and if a core charge is imposed and is covered under the product warranty, the
defective un-repaired or modifi ed board MUST BE RETURNED to Sony.
b) and if the core charge is NOT covered under the product warranty, the defective
un-repaired or modifi ed board MUST BE DESTROYED.
5) If a unit is destroyed (such as fi eld scrap), the Circuit Board identifi ed with a
red outline and a in the service manual MUST BE DESTROYED.
A-1
KLV-32L500A
KLV-32L500A
APPENDIX A: ENCRYPTION KEY COMPONENTS
Encryption key components developed by Sony Corporation contain confi dential
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
As part of this agreement specifi c instructions must be adhered to whenever a Circuit
Board containing encryption key components is repaired and/or replaced pursuant to the
following:
Board containing encryption key components is repaired and/or replaced pursuant to the
following:
1) In the service manual the Circuit Board(s) containing encryption key components
shall be identifi ed with a red outline and a .
2) Only repair boards or components listed in the service manual shall be utilized for
replacement and/or repair.
3) Disassembly, decryption, or reverse-engineering component(s) is strictly prohibited.
4) Any board in which the Servicer replaces an encryption key component must be
placed back into the set it orignally came from and the replaced defective component
MUST BE DESTROYED. Boards cannot be swapped.
MUST BE DESTROYED. Boards cannot be swapped.
5) If a Circuit Board identifi ed with a red outline and a in the service manual is deemed
to be defective:
a) and if a core charge is imposed and is covered under the product warranty, the
defective un-repaired or modifi ed board MUST BE RETURNED to Sony.
b) and if the core charge is NOT covered under the product warranty, the defective
un-repaired or modifi ed board MUST BE DESTROYED.
5) If a unit is destroyed (such as fi eld scrap), the Circuit Board identifi ed with a
red outline and a in the service manual MUST BE DESTROYED.
A-1
KLV-32L500A
KLV-32L500A
APPENDIX A: ENCRYPTION KEY COMPONENTS
Encryption key components developed by Sony Corporation contain confi dential
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
information, and shall be handled under the non-disclosure obligations provided in the
applicable agreement with Sony Corporation (and/or its subsidiary).
As part of this agreement specifi c instructions must be adhered to whenever a Circuit
Board containing encryption key components is repaired and/or replaced pursuant to the
following:
Board containing encryption key components is repaired and/or replaced pursuant to the
following:
1) In the service manual the Circuit Board(s) containing encryption key components
shall be identifi ed with a red outline and a .
2) Only repair boards or components listed in the service manual shall be utilized for
replacement and/or repair.
3) Disassembly, decryption, or reverse-engineering component(s) is strictly prohibited.
4) Any board in which the Servicer replaces an encryption key component must be
placed back into the set it orignally came from and the replaced defective component
MUST BE DESTROYED. Boards cannot be swapped.
MUST BE DESTROYED. Boards cannot be swapped.
5) If a Circuit Board identifi ed with a red outline and a in the service manual is deemed
to be defective:
a) and if a core charge is imposed and is covered under the product warranty, the
defective un-repaired or modifi ed board MUST BE RETURNED to Sony.
b) and if the core charge is NOT covered under the product warranty, the defective
un-repaired or modifi ed board MUST BE DESTROYED.
5) If a unit is destroyed (such as fi eld scrap), the Circuit Board identifi ed with a
red outline and a in the service manual MUST BE DESTROYED.
