Sony KLV-32EX330 / KLV-40EX430 Service Manual ▷ View online
KLV-32EX330/40EX430(CH)
41
START
Speaker
Check
Speaker Impedance
at SP Connector
Change F6005
Check 19.5V_ADAPT
at F4000
Change F4000
IC4002 damage.
Change B*Board
NG
OK
NG
Check 19.5V_ADAPT
at F6005
on B* Board
NG
OK
OK
Check D4000
and D4001
Change
D4000 or D4001
NG
Check FB4014
and FB4015
OK
NG
Change
FB4014 or FB4015
OK
(*)
Size
B* Board Type
32”
BWM
40’’
BFM
2) 3 times blinking (Audio Error)
TROUBLE SHOOTING
KLV-32EX330/40EX430(CH)
42
START
Check PANEL_VCC_SW
on B* Board:
• BWM – Pin 1 CN8700
• BFM – Pin 51 CN8900
Troubleshoot
+12V DDCON
Remove and reinsert LVDS Flat
Flexible Cable (FFC) at Panel and
B* Board sides
Replace LVDS Flat Flexible
Cable (FFC)
Replace B* Board
B* Board Issue
Incorrect FFC
Insertion
LVDS Flat Flexible
Cable Issue
+12V is OK
Replace
O-Cell or Panel Module
END
O-Cell Issue
No +12V
Note :
PANEL_VCC_SW = 12V±1V
TV Boot Up
Normally
Normally
5x Blinking is Still
Observed
Observed
5x Blinking is Still Observed
5x Blinking is Still Observed
5x Blinking is Still Observed
TV Boot Up
Normally
Normally
TV Boot Up
Normally
Normally
TV Boot Up
Normally
Normally
* O-Cell or
Panel Module
change is
depend to
service
capabilities
Panel Module
change is
depend to
service
capabilities
(*)
Size
B* Board Type
32”
BWM
40’’
BFM
3) 5 times blinking (Panel Power Error)
TROUBLE SHOOTING
KLV-32EX330/40EX430(CH)
43
6x blinking
Yes
Able to repair
Panel Module
Change B Board
No
Replace LS Bar*
Symptom gone
B* board
6x blinking
Change Panel Module
Change Harness
Harness
Symptom gone
6x blinking
*
To avoid changing all LS bar, please follow steps below
(1)Turn off AC
(2)Unplug DC adaptor from DC jack
(3)Plug in DC adaptor to DC jack
(4)Turn on AC
(5)LS bar will turn on for ~4s before 6x blinking
(6)Observe which LS bar cannot turn on during power on
(7)Replace LS bar that failed to turn on
(2)Unplug DC adaptor from DC jack
(3)Plug in DC adaptor to DC jack
(4)Turn on AC
(5)LS bar will turn on for ~4s before 6x blinking
(6)Observe which LS bar cannot turn on during power on
(7)Replace LS bar that failed to turn on
(*)
Size
B* Board Type
32”
BWM
40’’
BFM
4) 6 times blinking (Panel ID NVM Error)
TROUBLE SHOOTING
KLV-32EX330/40EX430(CH)
44
Audio Problem
Main Speaker No Sound
HP Out No Sound
*V1, V2/D1 or
PC/HDMI analog
no sound?
Analog RF
no sound?
HDMI Audio
no sound?
USB Audio
no sound?
Refer “Main Speaker
No Sound”
* V1 = Video1, V2 = Video2,
D1 = Component1
Refer “HP Out
No Sound”
Refer “Analog Audio
Input
No Sound”
Refer “Analog RF
No Sound”
Refer “HDMI Audio
No Sound”
Refer “USB Audio
No Sound”
3-6. AUDIO PROBLEM
TROUBLE SHOOTING
Click on the first or last page to see other KLV-32EX330 / KLV-40EX430 service manuals if exist.