Sony KLV-32EX330 / KLV-40EX430 Service Manual ▷ View online
KLV-32EX330/40EX430(CH)
17
1-1-7. BEZEL-1
DISASSEMBLY
1-1. KLV-32EX330
1
3 Screws (SCREW, +PSW M3X8) P/N: 2-580-592-01
2 Screws (SCREW +BVTP 3X10 TYPE2 IT-3) P/N: 7-685-647-79
2
3
4
5
6
MAIN BRACKET
MAIN BRACKET
Remove main bracket
2 Screws (SCREW +BVTP 3X10 TYPE2 IT-3) P/N: 7-685-647-79
Lift up folded FFC
(covering the clamp bar)
(covering the clamp bar)
Lever up the clamp bar with thumb to unclamp FFC
Gently hold FFC & draw out from clamp bar
KLV-32EX330/40EX430(CH)
18
1-1-7. BEZEL-2
DISASSEMBLY
1-1. KLV-32EX330
2 Screws (SCREW +BVTP 3X10 TYPE2 IT-3) P/N: 7-685-647-79
7
Unplug connector HTW Board
8
9
10
Unclip the Source Board holder
Lift up a little the Source Board to ensure it is lose enough
for next procedure.
for next procedure.
Note: Before closing under cover, please make sure no wire will pinch.
KLV-32EX330/40EX430(CH)
19
1-1-7. BEZEL-3
DISASSEMBLY
1-1. KLV-32EX330
11
12
13
14
Note: After closing under cover, flip over the set facing upward.
Enclose Under Cover
Flip over the set
Set facing upward
17 hooks
KLV-32EX330/40EX430(CH)
20
1-1-7. BEZEL-4
DISASSEMBLY
1-1. KLV-32EX330
15
16
17
18
19
Place TV set on flat surface
Remove bottom corner hook up
(Left & Right symmetric)
(Left & Right symmetric)
Remove side hook to outside
(Lower -> Upper) (Left & Right symmetric)
Do not push CELL over than 5kg/1cm
(Lower -> Upper) (Left & Right symmetric)
Do not push CELL over than 5kg/1cm
2
Remove top hook to outside
(Center -> Corner)
Do not push CELL over than 5kg/1cm
(Center -> Corner)
Do not push CELL over than 5kg/1cm
2
Remove bottom hook with rotation
20
Remove the HTW Board from the removed Bezel.
Click on the first or last page to see other KLV-32EX330 / KLV-40EX430 service manuals if exist.