Sony KLV-32D300A / KLV-32V300A / KLV-40D300A / KLV-40V300A / KLV-40V380A / KLV-46D300A / KLV-46V300A / KLV-46V380A Service Manual ▷ View online
KLV-32/40/46D300A, 32/40/46V300A, 40/46V380A (CH) 5
Design and specifications are subject to change without notice.
PC Input Signal Reference Chart
• This TV’s PC input does not support Sync on Green or Composite Sync.
• This TV’s PC input does not support interlaced signals.
• If input signal is not shown in above chart, then this signal may not be displayed properly or cannot be displayed according to
• This TV’s PC input does not support interlaced signals.
• If input signal is not shown in above chart, then this signal may not be displayed properly or cannot be displayed according to
your settings.
• For the best picture quality, it is recommended to use the signals (boldfaced) in the above chart with a 60 Hz vertical frequency
from a personal computer. In plug and play, signals with a 60 Hz vertical frequency will be selected automatically.
Signals
Horizontal (Pixel)
Vertical (Line)
Horizontal
frequency
(kHz)
frequency
(kHz)
Vertical
frequency (Hz)
frequency (Hz)
Standard
VGA
640
480
31.5
60
VGA
640
480
37.5
75
VESA
720
400
31.5
70
VGA-T
SVGA
800
600
37.9
60
VESA Guidelines
800
600
46.9
75
VESA
XGA
1024
768
48.4
60
VESA Guidelines
1024
768
56.5
70
VESA
1024
768
60
75
VESA
WXGA
1280
768
47.4
60
VESA
1280
768
47.8
60
VESA
1360
768
47.7
60
VESA
KLV-32/40/46D300A, 32/40/46V300A, 40/46V380A (CH) 6
(3)
KLV-40/46V380A
* Mass are approximate values.
Model name
System
Panel System
LCD (Liquid Crystal Display) Panel
TV System
D/K, I, B/G,M
Colour System
PAL, PAL60, SECAM, NTSC4.43, NTSC3.58
Channel Coverage
D/K:VHF: C1 to C12, R1 to R12/ UHF: C13 to C57, R21 to R60/ CATV: S01 to S03, S1 to S41,
Z1 to Z39
I: UHF: B21 to B69/ CATV: S01 to S03, S1 to S41
B/G:VHF: E2 to E12/ UHF: E21 to E69/ CATV: S01 to S03, S1 to S41
M: VHF: A2 to A13/ UHF: A14 to A79/ CATV: A-8 to A-2, A to W+4, W+6 to W+84
B/G:VHF: E2 to E12/ UHF: E21 to E69/ CATV: S01 to S03, S1 to S41
M: VHF: A2 to A13/ UHF: A14 to A79/ CATV: A-8 to A-2, A to W+4, W+6 to W+84
Sound Output
8.5 W + 8.5 W (as distortion of 7%)
Input/Output jacks
Antenna
75 ohm external terminal
1
S video input (4-pin mini DIN)
1, 2, 3
Video input
1, 2, 3
Audio input: 500 mVrms, 47 kilohms
1, 2
Supported formats: 1080p (50/60 Hz), 1080i (50/60 Hz), 720p (50/60 Hz), 576p, 576i, 480p, 480i
Y: 1 Vp-p, 75 ohms, 0.3V sync negative/P
Y: 1 Vp-p, 75 ohms, 0.3V sync negative/P
B
/C
B
: 0.7 Vp-p, 75 ohms/P
R
/C
R
: 0.7 Vp-p, 75 ohms
1, 2
Audio input: 500 mVrms, 47 kilohms
Video output
Audio output
HDMI IN 1, 2, 3
Video: 1080p (50/60 Hz), 1080i (50/60 Hz), 720p (50/60 Hz), 576p, 576i, 480p, 480i
Audio: Two channel linear PCM
32, 44.1 and 48 kHz, 16, 20 and 24 bits
Analogue audio input: 500 mVrms, 47 kilohms (HDMI IN 2 only)
Audio: Two channel linear PCM
32, 44.1 and 48 kHz, 16, 20 and 24 bits
Analogue audio input: 500 mVrms, 47 kilohms (HDMI IN 2 only)
PC IN
(RGB)
PC Input (D-sub 15-pin)
G: 0.7 Vp-p, 75 ohms, non Sync on Green/B: 0.7 Vp-p, 75 ohms/
R: 0.7 Vp-p, 75 ohms/HD: 1-5 Vp-p/VD: 1-5 Vp-p
G: 0.7 Vp-p, 75 ohms, non Sync on Green/B: 0.7 Vp-p, 75 ohms/
R: 0.7 Vp-p, 75 ohms/HD: 1-5 Vp-p/VD: 1-5 Vp-p
PC IN
PC audio input (minijack)
Audio output
i
Headphones jack
Power and others
Power Requirements
220 V AC, 50 Hz
Viewing Screen Size (diagonal)
117 cm
(46 inches)
102 cm
(40 inches)
Display Resolution
1,920 pixels (horizontal)
×
1,080 lines (vertical)
Power Consumption
270 W
215 W
Standby Power Consumption
Less than 0.6 W
Dimensions
(w
(w
× h × d)
with stand (mm)
1114
×
782
×
306
981
×
696
×
265
without stand (mm)
1114
×
730
×
115
981
×
643
×
110
Mass*
with stand (kg )
32
25
without stand (kg)
27
21
Product usage condition
Environment Temperature
5 C - 35 C
Humidity
20% - 80%
Air Pressure
86 kPa - 106 kPa
KLV-46V380A
KLV-40V380A
KLV-32/40/46D300A, 32/40/46V300A, 40/46V380A (CH) 7
Design and specifications are subject to change without notice.
PC Input Signal Reference Chart
Signals
Horizontal (Pixel)
Vertical (Line)
Horizontal
frequency
(kHz)
frequency
(kHz)
Vertical
frequency (Hz)
frequency (Hz)
Standard
VGA
640
480
31.5
60
VGA
640
480
37.5
75
VESA
720
400
31.5
70
VGA-T
SVGA
800
600
37.9
60
VESA Guidelines
800
600
46.9
75
VESA
XGA
1024
768
48.4
60
VESA Guidelines
1024
768
56.5
70
VESA
1024
768
60
75
VESA
WXGA
1280
768
47.4
60
VESA
1280
768
47.8
60
VESA
1360
768
47.7
60
VESA
• This TV’s PC input does not support Sync on Green or Composite Sync.
• This TV’s PC input does not support interlaced signals.
• If input signal is not shown in above chart, then this signal may not be displayed properly or cannot be displayed according to
your settings.
• For the best picture quality, it is recommended to use the signals (boldfaced) in the above with a 60Hz vertiical frequency
from a personal computer. In plug and play, signals with a 60 Hz vertical frequency will be selected automatically.
KLV-46V380A
KLV-40V380A
KLV-32/40/46D300A, 32/40/46V300A, 40/46V380A (CH) 8
CAUTION
These servicing instructions are for use by qualified service
personnel only.
To reduce the risk of electric shock, do not perform any servicing
other than that contained in the operating instructions unless you
are qualified to do so.
personnel only.
To reduce the risk of electric shock, do not perform any servicing
other than that contained in the operating instructions unless you
are qualified to do so.
WARNING!!
An isolation transformer should be used during any service to
avoid possible shock hazard, because of live chassis.
The chassis of this receiver is directly connected to the ac power
line.
avoid possible shock hazard, because of live chassis.
The chassis of this receiver is directly connected to the ac power
line.
!
SAFETY-RELATED COMPONENT
WARNING!!
Replace all components with Sony parts whose part numbers
appear as shown in this manual or in supplements
published by Sony.
appear as shown in this manual or in supplements
published by Sony.
WARNINGS AND CAUTIONS
SAFETY-RELATED COMPONENT
WARNING
It is essential that all critical parts be replaced only with the part
number specified in the electrical parts list to prevent electric
shock, fire, or other hazard.
number specified in the electrical parts list to prevent electric
shock, fire, or other hazard.
NOTE: Do not modify the original design without obtaining
written permission from the manufacturer or you will
void the original parts and labor guarantee.
void the original parts and labor guarantee.
USE CAUTION WHEN HANDLING THE LCD PANEL
When repairing the LCD panel, be sure you are grounded by
using a wrist band.
using a wrist band.
When repairing the LCD panel on the wall, the LCD panel must
be secured using the 4 mounting holes on the rear cover.
1) Do not press on the panel or frame edge to avoid the risk of
be secured using the 4 mounting holes on the rear cover.
1) Do not press on the panel or frame edge to avoid the risk of
electric shock.
2) Do not scratch or press on the panel with any sharp objects.
3) Do not leave the module in high temperatures or in areas of
3) Do not leave the module in high temperatures or in areas of
high humidity for an extended period of time.
4) Do not expose the LCD panel to direct sunlight.
5) Avoid contact with water. It may cause a short circuit within
5) Avoid contact with water. It may cause a short circuit within
the module.
6) Disconnect the AC power when replacing the backlight (CCFL)
or inverter circuit.
(High voltage occurs at the inverter circuit at 650Vrms.)
(High voltage occurs at the inverter circuit at 650Vrms.)
7) Always clean the LCD panel with a soft cloth material.
8) Use care when handling the wires or connectors of the inverter
8) Use care when handling the wires or connectors of the inverter
circuit. Damaging the wires may cause a short.
9) Protect the panel from ESD to avoid damaging the electronic
circuit (C-MOS).
Click on the first or last page to see other KLV-32D300A / KLV-32V300A / KLV-40D300A / KLV-40V300A / KLV-40V380A / KLV-46D300A / KLV-46V300A / KLV-46V380A service manuals if exist.