Sony KLV-26S400A / KLV-32S400A / KLV-37S400A Service Manual ▷ View online
– 11 –
KLV-26,32,32/H/S,37 S400A
RM-GA011
SECTION 4
WIRE DRESSING
CAUTION :
1. Do not overpull the wires during dressing
1. Do not overpull the wires during dressing
--> avoid disconnection of wires.
2. Make sure wires are kept away from
sharp edges, heatsinks & other
high-temperature parts.
high-temperature parts.
4-1-1. Wire Dressing Overview for
Non-CISPR model.
4-1-2. Wire Dressing Overview for CISPR model.
4-1-3. Dress LVDS cable with Sheet Core C.
(For Non-CISPR model)
4-1-4. Dress LVDS cable with Sheet Core C &
Shield Tape and screw LVDS cable's clamp
on main bracket. (For CISPR model)
4-1.(KLV-26S400A)
Sheet Core C
LVDS cable
Datum
Datum
Sheet Core C
LVDS cable
Shield Tape
LVDS cable's
clamp
Screw
Make sure LVDS connector fully inserted
with correct direction as shown.
with correct direction as shown.
LEGEND :
Hook
Slide Clamp
– 12 –
KLV-26,32,32/H/S,37 S400A
RM-GA011
4-1-5. Dress Connector Assy 13P at
G1 bracket's hook,
4-1-6. Dress Connector Assy 14P+20P at
G1 bracket's hook.
4-1-7. Dress Connector Assy 14P+20P with
Slide Clamp (quantity: 2)
4-1-8. Dress Connector Assy 14P+20P on top of
Connector Assy.
4-1-9. Dress Connector Assy 14P+20P &
Speaker Wire with Sheet Core C
(quantity: 2).
4-1-10. Apply Sheet Core C on LCD panel and
dress Connector Assy 14P+20P &
Speaker Wire with Sheet Core C.
Connector assy 14P+20P
Sheet Core C
Connector assy 14P+20P
Speaker Wire
Datum
Caution:
Make sure wire not over
this line.
Make sure wire not over
this line.
Datum
Connector assy 13P
Connector assy 14P+20P
Connector assy 14P+20P
Pull wire straight
Connector assy 13P
Datum
Datum
Sheet Core C
Speaker Wire
Connector assy 14P+20P
Caution : Pull away from
screw boss
screw boss
Screw boss
Datum
– 13 –
KLV-26,32,32/H/S,37 S400A
RM-GA011
4-1-11. Dress Speaker Wire(L) with LCD tape.
4-1-12. Dress Connector Assy 14P+20P with
LCD tape.
4-1-13. Install AC Cord Holder on AC Power Cord.
(For Non-CISPR model)
4-1-14. Install AC Cord Holder on AC Power Cord.
(For CISPR model)
Speaker Wire
Caution : Pull away from screw boss
Screw boss
Datum
LCD tape
130mm
AC Power Cord
AC Cord holder
AC Power Cord
130mm
70mm
Ferrite Core
Cable tie
Note: Make sure
tighten cable tie and
cut excess part.
tighten cable tie and
cut excess part.
Connector assy 14P+20P
Datum
LCD tape
AC Cord holder
– 14 –
KLV-26,32,32/H/S,37 S400A
RM-GA011
4-2-1. Wire Dressing Overview for
Non-CISPR model
4-2-2. Wire Dressing Overview for CISPR model
4-2-3. Dress LVDS Cable with Sheet Core C (quantity: 2).
(For Non-CISPR model)
(For Non-CISPR model)
4-2. (KLV-32,32/H/S S400A)
Use UL tape
Use UL tape
location as guide line
location as guide line
Make sure LVDS connector fully inserted
with correct direction as shown.
with correct direction as shown.
LVDS cable
Sheet Core C
Datum
Datum
Datum
UL Tape
Click on the first or last page to see other KLV-26S400A / KLV-32S400A / KLV-37S400A service manuals if exist.